User's Manual

ManualsBrandsWiZ Connected Lighting Shanghai ManualsElectronics2.4 GHz Wi-Fi Module

Table Of Contents

空白页面

WiZ 8285 1517PT User manual

1. Overview

WiZ 8285 1517PT is an embedded Wi-Fi module with built-in a PCB antenna based on ESP8285.

Table 1-1. WiZ 8285 1517PT specification

Figure 1-1. Appearance

WiZ 8285 1517PT User manual V19.09.1 Page 1 of 10

Categories Items Specifications

Hardware

Operating Voltage Min. 2.7VDC, Max. 3.6VDC

Operating Current Avg. 120mA, Max. 240mA

Operating Temperature -10°C ~ 105°C

Size 17.3 x 15 x 2.3mm

Interfaces 5 x GPIO, 1 x ADC, 1 x UART

Dimming Control PWM @ 200Hz, Logic level

Wi-Fi

Protocols 802.11 b/g/n, WPA2

Frequency 2412-2462MHz

Software

Encryption Wi-Fi: WPA2, TCP: TLS1.2

Network Protocols IPv4, TCP/UDP, HTTPS, MQTT

Upgrade Automated and transparent, from Cloud

User Control Smart Application, Cloud control, Voice control

(Amazon Alexa, Google Home)

Summary of content (12 pages)

PAGE 1
WiZ 8285 1517PT User manual 1. Overview WiZ 8285 1517PT is an embedded Wi-Fi module with built-in a PCB antenna based on ESP8285. Table 1-1. WiZ 8285 1517PT specification Categories Items Specifications Hardware Operating Voltage Min. 2.7VDC, Max. 3.6VDC Operating Current Avg. 120mA, Max. 240mA Operating Temperature -10°C ~ 105°C Size 17.3 x 15 x 2.3mm Interfaces 5 x GPIO, 1 x ADC, 1 x UART Dimming Control PWM @ 200Hz, Logic level Protocols 802.
PAGE 2
WiZ 8285 1517PT User manual 2. Pin Description Figure 2-1. WiZ 8285 1517PT Pin Connection Layout Table 2-1.
PAGE 3
WiZ 8285 1517PT User manual 3. Functional Description 3.1 Interface Description Table 3-1. Interface Description for Lamp configure Interface PWM Pin Function Description PWM – CW Currently the PWM interface has five channels. PWM – WW PWM interface can realize the control of LED lights directly. PWM – R / G / B PWM PWM I2C ADC UART PWM – DIM The DIM & CCT are PWM signal. The DIM control the dimming ratio PWM - CCT and CCT control the CW / WW ratio for the LED lamp.
PAGE 4
WiZ 8285 1517PT User manual 4. Electrical Characteristics 4.1 Electrical Characteristics Table 4-1. Electrical Characteristics Parameter Symbol Min TYP Max Unit Storage temperature - –40 - 125 ℃ Operating temperature - –40 25 105 ℃ Maximum soldering temperature (Condition: IPC/JEDEC J-STD-020) - - - 260 ℃ Supply voltage VDD 2.7 3.3 3.6 V Input logic level low VIL –0.3 - 0.25 VDD V Input logic level high VIH 0.75 VDD - VDD + 0.
PAGE 5
WiZ 8285 1517PT User manual 4.2 WiFi Radio Table 4-2. Wi-Fi Radio Characteristics Description Min TYP Max Unit Input frequency 2412 - 2462 MHz Input reflection - - –10 dB 20 22.16 dBm Output Power PA output power in 802.11b/g/n mode 17.4 Sensitivity DSSS, 1 Mbps - –98 - dBm CCK, 11 Mbps - –91 - dBm 6 Mbps (1/2 BPSK) - –93 - dBm 54 Mbps (3/4 64-QAM) - –75 - dBm HT20, MCS7 (65 Mbps, 72.
PAGE 6
WiZ 8285 1517PT User manual 4.3 Power Consumption The following power consumption data were obtained from the tests with a 3.3V power supply and a voltage stabilizer, in 25°C ambient temperature. All data are based on 50% duty cycle in continuous transmission mode. Table 4-3. Power Consumption Modes Min TYP Max Unit Tx 802.11b, CCK 11 Mbps, POUT = +17 dBm - 170 - mA Tx 802.11g, OFDM 54 Mbps, POUT = +15 dBm - 140 - mA Tx 802.11n, MCS7, POUT = +13 dBm - 120 - mA Rx 802.
PAGE 7
WiZ 8285 1517PT User manual 4.5 Electrostatic Discharge Table 4-4. Electrostatic Discharge Parameters Name Symbol Reference Level Max Unit Electrostatic Discharge (Human - Body Model) VESD (HBM) Temperature: 23 ± 5℃ Based on ANSI/ESDA/JEDEC JS - 001 - 2014 2 2000 V Electrostatic Discharge (Charged - Device Model) VESD (CDM) Temperature: 23 ± 5℃ Based on JEDEC EIA/JESD22 - C101F C2 500 V WiZ 8285 1517PT User manual V19.09.
PAGE 8
WiZ 8285 1517PT User manual 5. Dimensions Figure 5-1. WiZ 8285 1517PT Dimensions WiZ 8285 1517PT User manual V19.09.
PAGE 9
Regulatory Module Integration Instructions 2.2 List of applicable FCC rules This device complies with part 15.247 of the FCC Rules. 2.3 Summarize the specific operational use conditions This module can be applied in household electrical appliances as well as lighting equipments. . The input voltage to the module should be nominally 2.7-3.6 V DC ，typical value 3.3V DC and the ambient temperature of the module should not exceed 105℃. This module using PCB antenna with maximum gain is 2.0dBi.
PAGE 10
limits or band edge limits (e.g.，where a different antenna may be causing additional emissions). b)The testing should check for emissions that may occur due to the intermixing of emissions with the other transmitters， digital circuitry， or due to physical properties of the host product (enclosure). This investigation is especially important when integrating multiple modular transmitters where the certification is based on testing each of them in a stand-alone configuration.
PAGE 11
Operating the host product When testing the host product， all the transmitters must be operating.The transmitters can be enabled by using publicly-available drivers and turned on， so the transmitters are active. In certain conditions it might be appropriate to use a technology-specific call box (test set) where accessory devices or drivers are not available. When testing for emissions from the unintentional radiator， the transmitter shall be placed in the receive mode or idle mode， if possible.
PAGE 12
ISED RSS Warning: This device complies with Innovation, Science and Economic Development Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence.