GSM Fixed Wireless Terminal WT-1018 User’s Manual
WT-1018 GSM Fixed Wireless Terminal___________________________________ Contents Main Features……………………………………………………………………………………………...….3 Caution…………………………………………………………………………………………………......…3 Storage………………………………………………………………………………………………………...3 Sketch of Fixed Wireless Terminal……………………………………………………………………..…….4 Installing SIM Card…………………………………………………………………………………………...5 Setting up the Terminal…..…………………………………………………………………………………...5 Installation for connecting to register cost equipment………………………………………………………..
WT-1018 GSM Fixed Wireless Terminal___________________________________ Main Features • Adopt advanced microprocessor controlling circuit, run steadily. Capability is ascendant • Adopt high gains antenna. Signal is strong • Be applicable for GSM900MHz/DCS1800MHz/PCS 1900MHz • Call or called function can be set up flexibly • The functions of locking terminal, locking SIM card, locking network and locking cell can be set up conveniently. • Function of displaying incoming calls.
WT-1018 GSM Fixed Wireless Terminal___________________________________ Sketch of the Fixed Wireless Terminal The WT-1018 Fixed Wireless Terminal Power Indicator Network Indicator Frontal view LED indicators LED1 - Power indicator (it’s lit while power source is connected correctly) LED1 - Signal indicator (Flashing once in one second indicates that the terminal is on GSM network.
WT-1018 GSM Fixed Wireless Terminal___________________________________ Installing the SIM Card Proceed as follows: 1. 2. 3. 4. Slide back the SIM door and lift it up Slide the SIM card into the SIM door making sure that the clipped corner of the SIM card lines up with the clipped corner of the SIM holder Close the SIM door Slide the SIM door to lock the SIM card in place Setting up the Terminal Installation Condition Require 220v AC power. GSM signal can cover the area where the terminal is placed.
WT-1018 GSM Fixed Wireless Terminal___________________________________ The installation for connecting to register cost equipment If users demand register cost during calls, register cost equipment can be connected between terminal and ordinary telephone. Register cost equipment registers cost according to anti-polarity signal that is provided by terminal. Turn on and Turn off Wireless Terminal Turn on: Connect the input end of power adapter to power socket and the output end to the port of “DC6.
WT-1018 GSM Fixed Wireless Terminal___________________________________ Programming Code Setting (Have to enter Password before Start doing the Settings) Steps: 1. Password Verification Pick up phone, press **83211279#. If heard “du~~~” a continuous dialing tone, means the Password enter correctly, and then will continue to go into programming setting mode. User is able to change the settings now. If there is no continuous “du~~~”, means the Password enter not correct.
WT-1018 GSM Fixed Wireless Terminal___________________________________ *3*4*0# 6 Setting Local Area Code 7 Setting for adding “0” in front of destination number 8 Setting Local Prefix Number Gateway *1*XXXXXX# *1*# *3*5*# *3*5*0# *4*1*# *4*1*0# 9 Setting International Prefix Number Gateway *4*2*# *4*2*0# 10 Setting National Prefix Number Gateway *4*3*# *4*3*0# 11 Setting for Locking SIM Card *5*1*# *5*1*0# *5*2*# 12 Setting for Locking Terminal 13 Setting for Changing *6*XXXXXXXX
WT-1018 GSM Fixed Wireless Terminal___________________________________ Technical Specification 1. Working condition Environment temperature: 0 ~ +50ºC Relative humidity: 10%~95% Air pressure: 86~106kpa Environment yawp: ≤60dB (A) 2. Working frequency: GSM900MHz/GSM1800MHz 3. Stability of frequency: better than 2.5PPM 4. Signal sensitivity: -103dBM 5. Transmit power: <2w 6. Power: 220v±15% AC 7. The max distance between terminal and telephone: 100M WT-1018 – User Manual – Rev.1.
WT-1018 GSM Fixed Wireless Terminal___________________________________ Troubleshooting Phenomena Trouble Trouble Shooting 1. The signal is too weak Please move the terminal to the place where signal is stronger. Check whether antenna is connected well. SIM card is locked. Please contact the service provider.