BPM Connect Wi-Fi Smart Blood Pressure Monitor Installation and Operating Instructions BPM Connect v1.
Table of contents Minimum requirements ��������������������������������������������������������������������� 5 Internet access ��������������������������������������������������������������������������������������������������������������������������������������5 Smartphone or device ����������������������������������������������������������������������������������������������������������������������5 OS version �������������������������������������������������������������������������������������������������
Medical device ����������������������������������������������������������������������������������������������������������������������������������� 36 Personal data �������������������������������������������������������������������������������������������������������������������������������������� 36 Safety instructions ����������������������������������������������������������������������������37 Use and storage ����������������������������������������������������������������������������������������������
Important notice By using your BPM Connect you expressly agree to the Withings Services Terms and Conditions available on our website. BPM Connect v1.
Minimum requirements Internet access Access to the Internet is required to: • • • Download the Health Mate app, Set up your BPM Connect, Upgrade the firmware. For more details, refer to "Specifications" on page 64. Smartphone or device An iOS device or an Android device (with operational Bluetooth Low Energy and Wi-Fi or 3G/4G) is required to: • • • • Set up your BPM Connect, Retrieve data from your BPM Connect, Interact with your BPM Connect, Interact with people.
BPM Connect description Overview BPM Connect is a Wi-Fi blood pressure monitor providing medically accurate blood pressure and heart rate measurements with immediate feedback on the device and full data history in the app.
Product description (A) Button BPM Connect v1.
Setting up BPM Connect Installing the Health Mate app If the Health Mate app is not already installed on your device, perform the following steps: 1. Type go.withings.com in your device’s web browser. 2. Tap Download on the App Store or on the Play Store. 3. Tap Get. The installation process starts. When a new version of the Health Mate app is available, you will automatically be prompted to update it.
3. Tap Blood Pressure Monitors. 4. Tap BPM Connect. 5. Tap Install. BPM Connect v1.
6. Press and hold the button of BPM Connect. The LED of BPM Connect lights up blue and "SETUP" appears on the screen. 7. Tap Next. 8. Tap Pair. 9. Tap Pair again BPM Connect v1.
10. Tap Next. 11. Enter your email address, password, and then confirm your password. Tap Next. 12. Enter your first name, surname (last name) and birthday. Tap Next. 13. Select your gender and enter your current height and weight. Tap Create. 14. Enter the password of your Wi-Fi network and tap Connect if you want to install BPM Connect in Wi-Fi. You can also tap Choose a different network to use another one. 15. Tap I don't have Wi-Fi if you want to install BPM Connect in Bluetooth. BPM Connect v1.
16. Tap Done. I already have a Health Mate account If you already have a Health Mate account, you can get started on the installation process. To do so, perform the following steps: 1. 2. 3. 4. Open the Health Mate app. Log in to your account, if you already have one, or create one. Tap Devices. Tap +. BPM Connect v1.
5. Tap Blood Pressure Monitors. 6. Tap BPM Connect. 7. Tap Install. BPM Connect v1.
8. Press and hold the button of BPM Connect. The LED of BPM Connect lights up blue and "SETUP" appears on the screen. 9. Tap Next. 10. Tap Pair. 11. Tap Pair again. BPM Connect v1.
12. Tap Next. 13. Enter the password of your Wi-Fi network and tap Connect if you want to install BPM Connect in Wi-Fi. You can also tap Choose a different network to use another one. 14. Tap I don't have Wi-Fi if you want to install BPM Connect in Bluetooth. BPM Connect v1.
15. Tap Done. BPM Connect v1.
Using BPM Connect Positioning myself before and during the measurement Make sure you follow these guidelines when taking a measurement. Failing to do so may lead to inaccurate results or cause the measurements to fail. 1. Use BPM Connect on the left upper arm 2. Rest 5 minutes before the measurement. 3. Sit down in a comfortable position, legs uncrossed, feet flat or on the floor, arm and back supported. 4. Do not speak or move during the measurement. 5.
Taking a measurement To take a measurement, perform the following steps: 1. Unroll cuff and place your arm inside it. For more information on how to position BPM Connect, refer to "Positioning myself before and during the measurement" on page 17. 2. Tighten the cuff around your arm. The tube should be positioned against your inner arm. BPM Connect v1.
3. Place your arm on a table and level with your heart. 4. Press the button to start BPM Connect. The screen displays "BP". Note: You can select a simple measurement ("BP") or triple measurement ("BP x3") with a long press on the button. 5. Press the button again to start the measurement. 6. At the end of the measurement, results are displayed on the screen of BPM Connect. Press the button to validate the measurement. 7. Press the button again to select the user and attribute the measurement.
Results are sent via Wi-Fi or Bluetooth in the Health Mate app. BPM Connect v1.
Understanding my blood pressure measurements US and Canada Compare your results to the table below to understand them better. This classification is taken from the 2017 guidelines of the American Heart Association. This classification is based on the values of seated blood pressure measured in a doctor's office or hospital by a healthcare professional.
European Union and other countries Compare your results to the table below to understand them better. This classification is taken from the 2018 guidelines of the European Society of Hypertension. This classification is based on the values of seated blood pressure measured in the office or hospital by a healthcare professional.
Viewing the history of my measurements As soon as you take your blood pressure and your heart rate, your measurements are sent to the Health Mate app. To see detailed about your measurements, and see your full history, you have to check your data on the Health Mate app. You can access your data by tapping See my trend in any blood pressure measurement in your Timeline. To access your heart rate measurement data, tap any item in your Timeline. BPM Connect v1.
Getting more insights about my blood pressure (iOS only) Hy-Result is a medically validated protocol that allows you to test your hypertension from home and share the results with your doctor. It also gives you a complete and precise diagnostic about your blood pressure. While it is a chargeable option, you can use it as many times as you’d like after the purchase. Purchasing Hy-Result To get the Hy-Result function, perform the following steps: 1. Open the Health Mate app. 2. Tap Wellness Programs. 3.
Setting Hy-Result Before starting the protocol, you’ll have to fill in a form with various information about your health. Please note that none of this information will be shared with Withings or anyone else. Furthermore, this information will only be accessible locally on your iPhone. Once the purchase is validated, you can start setting Hy-Result. To do so, perform the following steps: 1. Open the Health Mate app. 2. Tap Wellness Programs. 3. Tap Hy-Result. 4. Tap Join. 5. 6. 7. 8.
Using Hy-Result The Hy-Result protocol takes place over five days. During these five days, you'll have to enter three measurements per half-day (ten half-days in total). You can select one of three ways to enter these measurements: • • • Enter three measurements manually Take three separate measurements using your BPM Connect Take an automatic measurement using your BPM Connect To get the results, you can't miss more than two half-days of measurements.
Managing my data Sharing my data with my doctor After measuring your blood pressure, you can choose to send your results to your doctor. To do so, perform the following steps: 1. Open the Health Mate app. 2. Select an blood pressure measurement in your Timeline. 3. Tap See my trend. 4. Tap the three dots at the top right of the screen. BPM Connect v1.
5. Tap Share with my doctor. 6. Enter the email of your doctor. You can choose to send all your blood pressure measurements or the measurements over the past 3 months/weeks. You can also set a periodical reminder. 7. Tap Confirm. BPM Connect v1.
Sharing my data with Apple Health The Health Mate app can share the following data with Apple Health: • • • Diastolic Blood Pressure Heart Rate Systolic Blood Pressure To link your accounts, perform the following steps: 1. Open the Health Mate app. 2. Tap Profile. 3. Tap Health. 4. Select the data you want to share with Apple Health. 5. Tap Allow. 6. Tap OK twice. BPM Connect v1.
Sharing my data with Google Fit The Health Mate app can share the heart rate measurements with Google Fit. To link your accounts, perform the following steps: 1. 2. 3. 4. Open the Health Mate app. Tap Profile. Tap Google Fit. Tap the toggle to activate the Google Fit integration. 5. Select the Google account you want to link your Withings Account to. 6. Tap OK twice. BPM Connect v1.
Deleting data You have the possibilty to delete your heart rate and blood pressure measurements from the Health Mate app. To do so, perform the following steps: 1. Open the Health Mate app. 2. Swipe the value which you want to delete measurement. BPM Connect v1.
Dissociating BPM Connect If you want to stop using BPM Connect, you have to dissociate it from your account first. Dissociating BPM Connect will not remove any of the data that was synced from the Health Mate app. To dissociate BPM Connect, perform the following steps: 1. Open the Health Mate app. 2. Go to Devices. 3. Tap BPM Connect. 4. Tap Dissociate this product. BPM Connect v1.
5. Tap Remove from my account. BPM Connect v1.
Cleaning and maintenance Cleaning BPM Connect • • • • • • • • • Do not use an alcoholic-base or solvent agent to clean BPM Connect. Clean BPM Connect with a soft and dry cloth. The dirt on the cuff can be cleaned by a moisten cloth and soap. Do not flush BPM Connect and cuff with much water. Do not dismantle BPM Connect or disconnect the cuff or try to repair by yourself. If any problem happens, refer to the distributor.
On Android: 1. Go to Settings and select Bluetooth. 2. Select the gear icon next to BPM Connect. 3. Select Forget or Remove. BPM Connect can now be reset to factory settings. To reset BPM Connect, perform the following steps: 1. Press and hold the monitor's button for 6 seconds until System is displayed on the screen. 2. Press the button until Reset is displayed on the screen. 3. Press and hold the monitor's button for 2 seconds. 4. Press the button 5 times as the display counts down from 5.
User guide copyright This user guide is protected by Intellectual Property laws and copyright. Any reproduction, modification, representation and/or publication, without Withings prior approval is strictly prohibited. You may print this user guide for your personal use exclusively. For any question please contact Withings at : https://support.withings.com/hc/ en-us/requests/new. Legal notice By using BPM Connect you expressly agree to the Withings Services Terms and Conditions available on our website.
Safety instructions Use and storage • • • • • • • • Use the product at temperatures between 10°C and 40°C (50°F and 104°F). Product may be stored in a clean, dry location between -25°C and 55°C (-13°F and 131°F) when not in use. Remove the batteries if you do not plan to use your BPM Connect for an extended period of time. BPM Connect is a digital monitor intended for use in measuring blood pressure and heart rate.
Cautions • • • • • • • • • • • • • • • • • • • • Always consult your doctor. Self-diagnosis of measurement results and self treatment are dangerous. People with severe blood flow problems, or blood disorders, should consult a doctor before using the BPM Connect. Cuff inflation can cause internal bleeding.
Specifications BPM Connect • • • • • Length: 50 mm (1.9 in.) Width: 65 mm (2.5 in.) Height: 155 mm (unfolded) (6.1 in.) Weight: 250 g (0.
Metrics • • • Systolic and diastolic blood pressure measurement Heart rate Heart rate measurement range: from 40 to 180 beats per minute Battery life • Up to 2 months (rechargeable) via micro-USB cable Compatible devices • • • • iPhone (4S or higher) Apple Watch iPod Touch (5th generation or higher) iPad (3rd generation or higher) Compatible OS • • iOS 10 or higher Android 6.0 or higher BPM Connect v1.
Document release overview Release date July 2019 Modifications v1.0 First release The screenshots in this manual are used for explanatory purposes. Your actual screens may differ from the screenshots in this manual. BPM Connect v1.
Warranty Withings One (1) Year Limited Warranty - BPM Connect Withings warrants the Withings branded hardware product (“BPM Connect”) against defects in materials and workmanship when used normally in accordance with Withings’ published guidelines for a period of ONE (1) YEAR from the date of original retail purchase by the end-user purchaser (“Warranty Period”).
Regulatory statements Federal Communications Commission (FCC) Statement FCC ID: XNAWPM05 This device complies with Part 15 of the FCC Rules.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
