Tablet / Tablet Gen 2 User Guide
Welcome Before using your tablet and this user guide, be sure to read the Safety, Warranty, and Setup Guide that comes with your tablet. Lenovo® makes constant improvement on the documentation of your tablet. To get all the latest documents, go to http://www.lenovo.com/support. Note: Your tablet might look slightly different from illustrations in this user guide. Third Edition (January 2017) © Copyright Lenovo 2016, 2017.
Contents Welcome . . . . . . . . . . . . . . . . . . Important safety information . . . . . Read this first . . . . . . . . . . . . . Conditions that require immediate action . . Service and upgrades . . . . . . . . . . Power adapters . . . . . . . . . . . . Extension cords and related devices . . . . Plugs and outlets. . . . . . . . . . . . Power supply statement . . . . . . . . . External devices . . . . . . . . . . . . General battery notice . . . . . . . . . . Notice for built-in rechargeable battery .
Lenovo factory recovery USB key Lenovo Support Web site . . . Lenovo Customer Support Center Purchasing additional services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 62 63 64 Appendix A. Regulatory information . . . . . . . . . . . . . . 65 Certification-related information . . . . . . . . Labels for the Windows operating system . . . . Wireless-related information . . . . . . . . . Wireless interoperability . . . . . . . . . Locating the UltraConnect™ wireless antennas . . . .
Important safety information Note: Read the important safety information first. Read this first This information can help you safely use your notebook computer. Follow and retain all information included with your computer. The information in this document does not alter the terms of your purchase agreement or the Lenovo Limited Warranty. For more information, see "Warranty Information" in the Safety, Warranty, and Setup Guide that comes with your computer. Customer safety is important.
• Damage to a battery (such as cracks, dents, or creases), discharge from a battery, or a buildup of foreign substances on the battery. • A cracking, hissing, or popping sound, or strong odor that comes from the product. • Signs that liquid has been spilled or an object has fallen onto the computer product, the power cord, or power adapter. • The computer product, power cord, or power adapter has been exposed to water. • The product has been dropped or damaged in any way.
Protect power adapters from liquids. For instance, do not leave your power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids can cause a short circuit, particularly if the power adapter has been stressed by misuse. Liquids also can cause gradual corrosion of the connector terminals on a power adapter, which can eventually result in overheating. Ensure that all power adapter connectors are securely and completely plugged into receptacles.
Power supply statement DANGER Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician.
Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply with local ordinances or regulations. Notice for built-in rechargeable battery DANGER Do not attempt to replace the built-in rechargeable battery. Replacement of the battery must be done by a Lenovo-authorized repair facility or technician. Only recharge the battery strictly according to instructions included in the product documentation.
from using the keyboard by lifting your hands from the palm rest; and be careful not to use the keyboard for any extended length of time. • Do not operate your computer or charge the battery near flammable materials or in explosive environments. • Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and reliable operation. These features might inadvertently become blocked by placing the product on a bed, sofa, carpet, or other flexible surface.
DANGER Connect and disconnect cables as described in the following procedures when installing, moving, or opening covers on this product or attached devices. To connect: To disconnect: 1. Turn everything OFF. 1. Turn everything OFF. 2. First, attach all cables to devices. 2. First, remove power adapter from outlets. 3. Attach signal cables to connectors. 3. Remove signal cables from connectors. 4. Attach power adapter to outlets. 4. Remove all cables from devices. 5. Turn devices ON.
If your Lenovo computer came with headphones or earphones in the package, as a set, the combination of the headphones or earphones and the computer already complies with the specifications of EN 50332-1. If different headphones or earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5 Limitation Values). Using headphones that do not comply with EN 50332-1 can be dangerous due to excessive sound pressure levels. Plastic bag notice DANGER Plastic bags can be dangerous.
Chapter 1. Meeting your ThinkPad X1 Tablet Get an overview of the tablet, such as the connectors, indicators, features, specifications, and operating environment. Note: Your tablet might look slightly different from the illustrations in this chapter. In the box Your shipping box contains the following items. Depending on the model, your tablet might come with one or more of the accessories.
Optional items ThinkPad X1 Tablet Thin Keyboard * ThinkPad X1 Tablet Thin Keyboard Gen 2 * ThinkPad X1 Tablet Presenter Module * ThinkPad X1 Tablet Productivity Module * ThinkPad Pen Pro * USB 3.0 pen holder * ThinkPad X1 Tablet Thin Keyboard Pen Holder * ThinkPad USB 3.
Connectors and indicators 1 Microphones: Your tablet has three microphones. Use the microphones to make calls and recordings. 2 Front camera and 3 Camera-status indicator: Use the 2-megapixel front-facing camera to take photos and make videos. 4 Ambient light sensor: Detect the amount of light in the environment and adjust the backlight of the display accordingly.
12 Base Module: You can secure the Base Module on your tablet with the screw shipped with your tablet or remove the Base Module if you want to install a feature-expansion module. To secure the Base Module on the ThinkPad X1 Tablet Gen 2, see “Securing the Base Module on the ThinkPad X1 Tablet Gen 2” on page 23. To remove the Base Module, see “Attaching the optional module to your tablet” on page 29.
2 Rear-camera flash light and 3 Rear camera: Use the 8-megapixel, high-resolution, rear-facing camera to take photos and make videos. 4 Nano-SIM-card slot *: See “Connecting to a wireless network” on page 12. 5 Power button: Press the power button to turn on your tablet. You can also use the power button to put it to sleep and wake it. 6 Kickstand release latch and 7 Kickstand: See “Using the kickstand” on page 10.
• USB-C connector • Pogo interface connector (for ThinkPad X1 Tablet Thin Keyboard and ThinkPad X1 Tablet Thin Keyboard Gen 2) • Module interface connector (for ThinkPad X1 Tablet optional modules) • microSD card slot • Nano Subscriber Identity Module (SIM) card slot Security features • Fingerprint reader * • Password • Security-lock slot • Trusted Platform Module (TPM) * Wireless features • Bluetooth 4.
If possible, place your tablet in a dry, well-ventilated area without direct exposure to sunshine. Do not use or store your tablet in dusty, dirty areas, or extremely hot or cold areas. Chapter 1.
8 Tablet / Tablet Gen 2 User Guide
Chapter 2. Getting Started Learn the basics to get started with your ThinkPad tablet. Follow the instructions to set up your tablet, use the multi-touch screen, connect to a network, and put your tablet into proper power modes. Setting up your tablet When you use the tablet for the first time, do the following to complete the initial setup: 1. Connect your tablet to ac power. 2. Press the power button to turn on the tablet. 3. Follow the instructions on the screen to complete the initial setup.
Using the kickstand Your tablet has a built-in kickstand. Slide the kickstand-release latch toward the outside of the tablet, and then pivot the kickstand into position. By flipping the kickstand open, you can use the tablet in the following modes.
The kickstand is multi-positional. In stand mode and stylus mode, you can adjust the kickstand to many angles for your most comfortable using experience. The following figures show the supported angles of the kickstand. Using the multi-touch screen Use the touch gestures to interact with your tablet. This section introduces only the most frequently used gestures. For a whole list of supported gestures, refer to the Windows help information. See “Getting help about the Windows operating system” on page 24.
Zoom in Zoom out Put two fingers on the screen and move them farther apart to zoom in. Put two fingers on the screen and move them closer together to zoom out. Rotate Swipe in from the top edge to the bottom edge Put two or more fingers on an item, and then rotate your fingers clockwise or counterclockwise. Close the current full-screened app. Swipe in from the left edge Swipe in from the right edge View all your open apps in task view. Open the action center.
Wi-Fi connection. The quality of the Wi-Fi signal is affected by the number of connected devices, the infrastructure, and the objects through which the signal is transmitted. • Mobile broadband network (supported by some models) The mobile broadband feature enables you to connect to the Internet from any location where cellular service is available. Mobile broadband connections use 3G, 4G, or LTE cellular and mobile networks, just as phones do.
Connecting to a wired network You might need to use a wired network connection through an Ethernet cable when downloading large files. Depending on the model, your tablet might come with a ThinkPad USB 3.0 Ethernet Adapter. Use this adapter to connect your tablet to a wired network. You can also purchase it from http://www.lenovo.com/essentials. To connect to a wired network: 1. Connect the ThinkPad USB 3.0 Ethernet Adapter to the USB 3.0 connector on your tablet. 2.
Putting your tablet into sleep mode and waking up your tablet If you are not going to use the tablet for just a few minutes, put your tablet into sleep mode to lock it and save power. To put your tablet into sleep mode, open the Start menu , then tap Power ➙ Sleep. To wake up your tablet from sleep mode, press the power button. Turning off and turning on your tablet If you are not going to use the tablet for long periods, turn off your tablet to save power.
16 Tablet / Tablet Gen 2 User Guide
Chapter 3. Using your tablet Learn the skills to make the best use of your tablet such as using Lenovo apps, connecting an NFC device, and using the fingerprint reader. Registering your tablet To register your tablet with Lenovo, do one of the following: • Use Lenovo Companion . For information about accessing Lenovo Companion, see “Discovering Lenovo apps” on page 17. • Go to http://www.lenovo.com/register and follow the instructions on the screen.
• Lenovo USB C to VGA plus Power Adapter If your tablet does not come with these adapters, you can purchase them from the Lenovo Web site at http://www.lenovo.com/essentials. Choosing a display mode You can display your desktop and apps on the tablet, the external display, or both. To choose how to display the video output, do the following: 1. Open the Start menu . 2. Tap Settings ➙ System ➙ Display. 3. Follow the instructions on the screen to select a presentation scheme.
To pair your tablet with an NFC card: Before you start, ensure that the card is in NFC Data Exchange Format (NDEF), otherwise the card cannot be detected. 1. Tap the card on the NFC touchpoint as shown. 2. Slowly move the card in the upright direction within a 10 mm (0.39 inches) distance. Then hold the card for seconds until you are prompted that the card has been successfully detected.
1. Open the Start menu . 2. Tap Settings ➙ Network & Internet ➙ Airplane mode. 3. Tap the NFC control to turn it on. If you still cannot enable the NFC feature, check the NFC setting in the ThinkPad Tablet Setup app by doing the following: 1. Open the ThinkPad Tablet Setup app. See “ThinkPad Tablet Setup app” on page 51. 2. Tap Security ➙ I/O Port Access. 3. Set the NFC option to On. Using a microSD card Your tablet has a microSD card slot behind the kickstand.
To remove the microSD card: 1. Flip the kickstand open to locate the microSD card slot. 2. Push the microSD card inward a little until you hear a click. The microSD card ejects. 3. Gently slide the card out of the card slot. Using the fingerprint reader Depending on the model, your tablet might have a fingerprint reader. With fingerprint authentication, you can log in to your tablet by swiping your fingerprints instead of entering the password.
When you scan your finger over the fingerprint reader, note the following: 1. Tap the fingerprint reader with the top joint of your finger and hold your finger there for one or two seconds with a little pressure. 2. Lift your finger to complete one scan.
Using the cameras Your tablet might be equipped with two conventional cameras, a front camera and a rear camera. You can use the conventional cameras to take pictures and record videos. To start the camera, open the Start menu, and tap Camera. When the camera starts, the green camera-in-use indicator turns on. You can configure the camera settings to meet your needs, such as adjusting the video output quality.
Using passwords You can set a supervisor password to prevent your tablet from unauthorized use. Supervisor password protects the system information stored in ThinkPad Tablet Setup. Without the supervisor password, no one can change the configuration of the tablet. The system administrator can set the same supervisor password on many tablets to make administration easier. It is recommended that you record your password and store it in a safe place.
Using your tablet more comfortably With the help of all the conveniences and powerful features of your tablet, you can carry your tablet all day long at many places. Therefore it is important that you remain attentive to good posture, good lighting, and proper seating to achieve greater comfort with your tablet. Active sitting and rest breaks: The longer you sit and work with your tablet, the more important it is to observe your working posture.
Protecting the screen with a replaceable film You can purchase a replaceable film to protect the screen from scratching and extend the life of your tablet. To use a replaceable film, clean the screen first and then apply the replaceable film on the screen. Storing the tablet for extended periods If you are not going to use your tablet for an extended period of time, remove the nano-SIM card from your tablet.
Chapter 4. Accessories The following accessories are designed to enhance your experience with the tablet: • Productivity Module • Presenter Module • Thin Keyboard • ThinkPad Active Pen and pen holder • ThinkPad WiGig Dock Finding ThinkPad options Depending on the model, your tablet might not come with certain accessories. You can purchase the accessories from the Lenovo Web site at: http://www.lenovo.
3 Pogo interface connector: The pogo interface connector is under the ThinkPad cover. Remove this cover to attach the Thin Keyboard to the Productivity Module. See “Attaching the Thin Keyboard to your tablet” on page 33. 4 Pogo pins: Use the pogo pins to connect to the pogo interface connector on the tablet.
HDMI out: Slide the HDMI latch on the Presenter Module to the Out position. Then you can use the HDMI connector for external display. The supported resolution is 1920 x 1080 pixels / 60 Hz, 24 bpp. When the Presenter Module is connected to an external monitor and your tablet at the same time, observe the following: • When the projector is on, the video signal from your tablet is displayed through the projector instead of the external monitor.
1. If you are using a ThinkPad X1 Tablet Gen 2, you might have secured the Base Module on your table using the screw shipped with your tablet. In this case, open the film to reveal the screw and then remove the screw. Note: Save the removed screw in its package for future use. If you have not secured the Base Module using the screw or if you are using a ThinkPad X1 Tablet, skip this step and continue with the following. 2. Slide the release latch to unlock the Base Module and then remove it.
3. Lift the lock levers on the optional module and insert the optional module into the guide holes of your tablet. Ensure that the optional module is firmly attached to the module interface connector 1 . 4. Close the lock levers to lock the optional module. Using the optional module with your tablet You can use the optional module with your tablet in the following three modes. With an optional module attached, you also can adjust the kickstand to many angles in stand mode and stylus mode.
Thin Keyboard Depending on the model, your tablet might come with a ThinkPad X1 Tablet Thin Keyboard or ThinkPad X1 Tablet Thin Keyboard Gen 2 (referred to as Thin Keyboard). Attach the keyboard to your tablet so that you can transform your tablet into a portable notebook computer. Overview Notes: • Depending on the model, the Thin Keyboard might look different from the illustrations in this topic. • The color of the Thin Keyboard might vary by country or region of delivery.
ThinkPad X1 Tablet Thin Keyboard Gen 2 overview 1 Pogo cover with guide pins: The pogo cover with guide pins enables you to attach the keyboard to your tablet magnetically. 2 TrackPoint® pointing device: The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as pointing, clicking, and scrolling. 3 Trackpad: The trackpad is a pointer-positioning device that enables you to point, select, and scroll, like you do with a traditional mouse.
The Thin Keyboard magnetically attaches to your tablet as shown by bringing the two close together. When the Thin Keyboard gets close enough, it aligns and snaps into place. You can easily remove the Thin Keyboard by pulling it away. • For tablets equipped with a feature-expansion module (To install the feature-expansion module to the tablet, see “Attaching the optional module to your tablet” on page 29): 1. Remove the cover on the front side of the module and store it on the Base Module as shown.
2. Bring the Thin Keyboard close to the module. When the Thin Keyboard gets close enough, it aligns and snaps into place. Using the Thin Keyboard With the Thin Keyboard attached to your tablet, you can use the Thin Keyboard in the following modes. Lay-flat mode Keep the Thin Keyboard laid flat on the table surface as shown. a With a feature-expansion module attached b With the Base Module attached Tilt mode Fold the living hinge as shown.
a With a feature-expansion module attached b With the Base Module attached Middle mode Fold the living hinge and then fold the two magnetic bars together as shown. The angle between the Thin Keyboard and the table surface is about 6.9 degrees to 7.8 degrees. Note: Middle mode is applicable only when a feature-expansion module is attached.
Cover mode Close the Thin Keyboard as shown to put the tablet into sleep mode and protect the touch screen. To wake up the tablet from sleep mode, open the Thin Keyboard and do any of the following: • Press the power button • Tap or swipe across the trackpad • Press a trackpad button • Press any key other than F1 through F12 Nest mode Nest mode is supported only when a Presenter Module or Productivity Module is attached to your tablet.
1. Go to Control Panel, then change the view of Control Panel from Category to Large icons or Small icons. 2. Click Keyboard. In the Keyboard Properties window, click the Fn and function keys tab. 3. Select the options of your preference. • Mute or unmute the speakers. When the speakers are muted, the indicator on the key is on. If you mute the sound and turn off your tablet, the sound remains muted when you turn on your tablet again. To turn on the sound, press the volume-down key or the volume-up key .
1. Go to Control Panel, then change the view of Control Panel from Category to Large icons or Small icons. 2. Click Keyboard. In the Keyboard Properties window, click the Fn and function keys tab. 3. Select the options of your preference. • Mute or unmute the speakers. When the speakers are muted, the indicator on the key is on. If you mute the sound and turn off your tablet, the sound remains muted when you turn on your tablet again. To turn on the sound, press the volume-down key or the volume-up key .
• Fn+4: Press Fn+4 to put the tablet into sleep mode. To wake up the tablet, do any of the following: – Press the power button – Tap or swipe across the trackpad – Press a trackpad button – Press any key other than F1 through F12 Using the TrackPoint pointing device The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as pointing, clicking, and scrolling.
Press and hold the dotted scroll bar 4 while applying pressure to the pointing stick in the vertical or horizontal direction. Then you can scroll through the document, Web site, or apps. Using the trackpad The entire trackpad surface is sensitive to finger touch and movement. You can use the trackpad to perform all the pointing, clicking, and scrolling functions of a traditional mouse. If the trackpad surface is stained with oil, turn off the tablet first.
• When using two or more fingers, ensure that you position your fingers slightly apart. • Some gestures are not available if the last action was done from the TrackPoint pointing device. • Some gestures are only available when you are using certain apps. Tap Tap anywhere on the trackpad with one finger to select or open an item. Two-finger tap Tap anywhere on the trackpad with two fingers to display a shortcut menu.
Replacing the cap of the pointing stick The cap 1 on the end of the pointing stick is removable. After you use the cap for a period of time, you might consider replacing the cap with a new one. Ensure that you use a cap with grooves a as shown in the following illustration. To get a new cap, contact Lenovo. For information about contacting Lenovo, see “Lenovo Customer Support Center” on page 63.
Pen overview 1 End cap: Unscrew the end cap to install or replace a battery. 2 Right-click button: To right-click, tap the tip on the screen and press the right-click button, or hold the pen tip on the screen for one second. 3 Eraser button: To erase text or drawing, hold down the eraser button and drag the tip across the area you want to erase. 4 44 Pen tip: To click, tap on the screen with the tip. To double-click, tap twice.
Installing a battery to power the pen Depending on the model, your pen might not be installed with a battery. To install an AAAA alkaline battery, do the following: 1. Unscrew the end cap. 2. Insert an AAAA alkaline battery into the battery compartment. 3. Reinstall the end cap. 4. Tighten the end cap. Using the USB 3.0 pen holder to store the pen Your tablet might come with a USB 3.0 pen holder. Use this pen holder to store the pen on your tablet by doing the following: 1.
Using the ThinkPad X1 Tablet Thin Keyboard Pen Holder to store the pen Your tablet might come with a ThinkPad X1 Tablet Thin Keyboard Pen Holder. Use this pen holder to store the pen by doing the following: 1. Remove the filler on the right side of the ThinkPad X1 Tablet Thin Keyboard. 2. Insert the pen holder into the ThinkPad X1 Tablet Thin Keyboard. 3. Insert the pen into the pen holder horizontally.
1 Emergency-reset hole If your dock stops responding, hold down the power button for several seconds to turn off the dock. If the dock still cannot be turned off, remove the ac power adapter first. Then insert a straightened paper clip into the emergency-reset hole to reset the dock. 1 2 USB 2.0 connectors: Connect devices that are compatible with USB 2.0, such as a USB mouse or a USB keyboard. 3 Audio connector: Connect headphones or a headset that has a 3.5-mm (0.
9 ac power connector: Connect the ac power adapter. 10 HDMI connector: Connect a high-definition television. 11 DisplayPort connector: Connect a high-performance monitor, a direct-drive monitor, or other devices that use a DisplayPort connector. 12 Ethernet connector: Connect the dock to an Ethernet LAN. Setting up the ThinkPad WiGig Dock 1. Connect the power cord to the ac power adapter. 2. Connect the ac power adapter to the power connector of the dock. 3.
6. Position your tablet close to the ThinkPad WiGig Dock, within 90 cm (35 inches). The dock also must be within a 120-degree sector region relatively to the rear of the tablet. Ensure that no objects are between the dock and the tablet. Note: Ensure that the WiGig dock and your tablet are placed in the recommended position.
To manage the ThinkPad WiGig Dock, do the following: 1. Tap the Start button to open the Start menu. 2. Tap Intel ➙ Intel Wireless Dock Manager to start the Wireless Dock Manager program. 3. Tap Dock Management. 4. Follow the instructions on the screen to configure the settings as desired. For more information, refer to the manuals that come with the dock and the help information system of the Wireless Dock Manager program.
Chapter 5. Advanced configuration This chapter provides information about the advanced configuration and features. Installing device drivers The device drivers are available at http://www.lenovo.com/ThinkPadDrivers. Choose your tablet product name to view all the device drivers for your tablet. Attention: Always go to http://www.lenovo.com/ThinkPadDrivers for the latest device drivers. Do not download them from the Windows Update Web site.
You can update the UEFI BIOS and the ThinkPad Tablet Setup app by starting your tablet with a flash update application running in the Windows environment. When you add software, hardware, or a device driver, you can consider updating your UEFI BIOS for the new addition to work correctly. To update your UEFI BIOS, go to http://www.lenovo.com/ThinkPadDrivers. System management This section is intended primarily for network administrators.
Chapter 6. Accessibility Lenovo helps users with disabilities to access information and technology easily. Some accessibility tools are available in the Windows operating system, and others can be purchased from third-party providers. This section gives a brief introduction to the available accessibility tools. For details about how to use the accessibility tools, refer to the Windows help information. See “Getting help about the Windows operating system” on page 24.
To open Speech Recognition, type Speech Recognition into the search box. Customizable text size Depending on your preference, you can change only the text size instead of changing the size of everything on the desktop. To change the text size, open Control Panel. For information about accessing the Control Panel, see “Accessing tablet settings” on page 24. Then tap Appearances and Personalization ➙ Display, go to Change only the text size, and set a text size that meets your needs.
2. Tap Ease of Access ➙ Ease of Access Center ➙ Make the keyboard easier to use. • Change the settings of the Fn key and function keys by doing the following: 1. Go to Control Panel. For information about accessing the Control Panel, see “Accessing tablet settings” on page 24. Change the view of Control Panel from Category to Large icons or Small icons. 2. Tap Keyboard. In the Keyboard Properties window, tap the Fn and function keys tab. 3. Select the options of your preference. Chapter 6.
56 Tablet / Tablet Gen 2 User Guide
Chapter 7. Troubleshooting If your tablet encounters a problem, find a solution here. Frequently asked questions The problems and solutions described in this section are meant only as a guide. They are not definitive problem-solving techniques. If a problem persists, you can get support from Lenovo. For more information, see “Lenovo Customer Support Center” on page 63. Attention: When you observe a problem, stop operation immediately, because taking further action might result in data loss or damage.
• The speaker is not covered. • The speaker mute function is disabled. • If you are using a headset, unplug it, then plug it in again. • The volume is not turned to the lowest level. Failed to play a song, video, or other media file? Ensure that the media file is not corrupted. External device connection problem Failed to detect an external display? Tap and hold (right-click) anywhere on the desktop, then tap Screen resolution/Display settings ➙ Detect.
Error messages When the following error messages are displayed on the screen, take the corresponding solutions. • Message: 0177: Bad SVP data, stop POST task. Solution: Checksum of the supervisor password in the EEPROM is not correct. The system board must be replaced. Have the tablet serviced. • Message: 0183: Bad CRC of Security Settings in EFI Variable. Enter ThinkPad Setup. Solution: Checksum of the Security settings in the EFI Variable is not correct. Enter ThinkPad Setup to check security settings.
Solution: Machine UUID is invalid. Have the tablet serviced. • Message: Fan error Solution: Cooling fan has failed. Shut down the tablet immediately and have the tablet serviced. • Message: Thermal sensing error Solution: The thermal sensor has a problem. Shut down the tablet immediately and have the tablet serviced. • Message: Error: The non-volatile system UEFI variable storage is nearly full.
1. Open the Start menu . Tap Settings ➙ Update & security ➙ Recovery. 2. In the Reset this PC section, tap Get started. 3. Follow the instructions on the screen to refresh your tablet. Using advanced startup options With advanced startup options, you can change the firmware settings of the tablet, change the startup settings of the Windows operating system, start the tablet from an external device, or restore the Windows operating system from a system image.
Using the recovery USB drive If you cannot start your tablet, refer to “Frequently asked questions” on page 57. If you still cannot start your tablet, use the recovery USB drive to recover your tablet. To use a recovery USB drive, do the following: 1. Ensure that your tablet is connected to ac power. 2. Connect the recovery USB drive to the tablet. 3. Open the ThinkPad Tablet Setup app. See “ThinkPad Tablet Setup app” on page 51. 4. Tap Startup.
Lenovo Customer Support Center In most cases, you can solve your tablet problems by referring to the error message solutions, running diagnostic apps, or consulting the Lenovo Web site. If you still encounter tablet problems after the self-troubleshoot, contact Lenovo Customer Support Center. If possible, be near your tablet when you make the call.
• Refer to the Safety, Warranty, and Setup Guide that comes with your tablet. • Go to http://www.lenovo.com/support/phone. If the numbers for your country or region are not provided, contact your Lenovo reseller or Lenovo marketing representative. Services available during the warranty period • Problem determination - Trained personnel are available to assist you with determining if your tablet has a hardware problem and deciding what action is necessary to fix the problem.
Appendix A. Regulatory information This appendix provides regulatory information. The latest compliance information is available at http://www.lenovo.com/compliance. Certification-related information The following table contains information about the machine types (if there are), product name, and compliance ID.
• The 802.11b/g Standard, 802.11a/b/g, 802.11n, or 802.11ac on Wireless LANs, as defined and approved by the Institute of Electrical and Electronics Engineers. • The Wireless Fidelity (Wi-Fi) certification as defined by the Wi-Fi Alliance®. The Bluetooth card in your tablet is interoperable with any Bluetooth product that is compliant to Bluetooth Specification 4.1 as defined by the Bluetooth Special Interest Group SIG. It supports Windows 10 in-box Bluetooth profiles.
This equipment is a secondary type device, that is, it is not protected against harmful interference, even if the interference is caused by a device of the same type, and it also cannot cause any interference to primary type devices.
• On board of airplanes, in hospitals or near petrol stations, blasting areas (with electro-explosive devices), medical implants or body-worn electronic medical devices, such as pace makers. • In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
European Union - Compliance to the Electromagnetic Compatibility (EMC) Directive or Radio Equipment Directive Models without a radio device: This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC (until 19 April, 2016) and Council Directive 2014/30/EU (from 20 April, 2016) on the approximation of the laws of the Member States relating to electromagnetic compatibility.
Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4: Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B. Korea Class B compliance statement Japan VCCI Class B compliance statement Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase Japan notice for ac power cord The ac power cord shipped with your product can be used only for this specific product. Do not use the ac power cord for other devices.
The WEEE marking on Lenovo products applies to countries with WEEE and e-waste regulations (for example, the European WEEE Directive, India E-Waste Management & Handling Rules). Appliances are labeled in accordance with local regulations concerning waste electrical and electronic equipment (WEEE). These regulations determine the framework for the return and recycling of used appliances as applicable within each geography.
Disposing of Lenovo computer components Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor.
Battery recycling information for the United States and Canada Battery recycling information for the European Union Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators.
For proper collection and treatment, go to: http://www.lenovo.com/lenovo/environment Restriction of Hazardous Substances (RoHS) Directive The latest environmental information about Lenovo products is available at: http://www.lenovo.
China RoHS Appendix A.
Taiwan RoHS Additional compliance information Brazil audio notice Ouvir sons com mais de 85 decibéis por longos períodos pode provocar danos ao sistema auditivo.
ENERGY STAR model information ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices. Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation. You might find an ENERGY STAR mark affixed on the or displayed on the power settings interface.
78 Tablet / Tablet Gen 2 User Guide
Appendix B. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux agreement(s) which may accompany software included with this product. Lenovo may update this document at any time without notice. To obtain the most up-to-date documentation for your computer, go to: http://www.lenovo.
Appendix C. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Lenovo logo ThinkPad ThinkPad logo TrackPoint UltraConnect Microsoft, Windows, and Cortana are trademarks of the Microsoft group of companies. Intel and RealSense are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.
82 Tablet / Tablet Gen 2 User Guide