Avaya 1140E IP Deskphone User Guide Avaya Communication Server 1000 Document Status: Standard Document Version: 06.
© 2010 Avaya Inc. All Rights Reserved. Notices While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing, Avaya assumes no liability for any errors. Avaya reserves the right to make changes and corrections to the information in this document without the obligation to notify any person or organization of such changes.
Revision history Revision history May 2011 Standard 06.03. This document is up-issued to reflect changes in global power supply information. March 2011 Standard 06.02. This document is up-issued to reflect changes in the procedures for cancelling Call Forward. October 2010 Standard 06.01. This document is up-issued to support Unistim 5.0 and Avaya Communication Server 1000 Release 7.5. June 2010 Standard 05.02.
Revision history June 2009 Standard 03.02. This document is up-issued to support Communications Server 1000 Release 6.0. May 2009 Standard 03.01. This document is up-issued to support Communications Server 1000 Release 6.0. January 2009 Standard 02.05. This document is up-issued to support Communications Server 1000 Release 5.5 for UNIStim 3.0. This document reflects changes in section Enabling USB Headset. December 2008 Standard 02.04.
Revision history June 2006 Standard 4.00. This document is issued to support Communication Server 1000 Release 4.5 software. Added support for new security features. February 2006 Standard 3.00. This document is issued to support Communication Server 1000 Release 4.5 software. January 2006 Standard 2.00. This document is issued to support Communication Server 1000 Release 4.5 software. November 2005 Standard 1.00. This document is issued to support Communication Server 1000 Release 4.5 software.
Revision history 6
Contents Contents Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Getting technical documentation . . . . . . . . . . . . . . . . . . . 15 Getting product training . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Getting help from a distributor or reseller . . . . . . . . . . . . . 15 Getting Help from the Avaya Web site . . . . . . . . . . . . . . .
Contents Replacing your narrowband headset with a wideband headset . . 46 Virtual Private Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Connecting your IP Deskphone . . . . . . . . . . . . . . . . . . . . . . . 49 QoS configuration recommendations . . . . . . . . . . . . . . . . 51 Installing and configuring VPN . . . . . . . . . . . . . . . . . . . . . . . . 52 Configuring Telephone Options . . . .
Contents Configuring 4. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . 100 2. Local Diagnostics submenu . . . . . . . . . . . . . . . . . . . . . . . 112 1. IP Set Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 2. Network Diagnostic Tools . . . . . . . . . . . . . . . . . . . . . 112 3. Ethernet Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 4. IP Network Statistics . . . . . . . . . . . . . . . . . . . . . . . . . 113 5. USB Devices . . . . . . . .
Contents Using intercom calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 While on an active call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Placing a call on hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Transferring a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Using Timed Reminder Recall . . . . . . . . . . . . . . . . . . . . .
Contents Working without interruption . . . . . . . . . . . . . . . . . . . . . . 158 Using Make Set Busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Call Deflect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Additional call features . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Using AutoDial Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Using the Buzz signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Using Resume Normal Mode . . . . . . . . . . . . . . . . . . . . . 190 Troubleshooting MG 1000B . . . . . . . . . . . . . . . . . . . . . . 191 Using Hospitality features . . . . . . . . . . . . . . . . . . . . . . . . . 192 Configuring Automatic Wake-Up . . . . . . . . . . . . . . . . . . . . . 192 Activating Message Registration . . . . . . . . . . . . . . . . . . . . . 194 Using Maid Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 Displaying Room Status . . . . . . . .
Contents Terms you should know . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 14
Customer Service Customer Service Visit the Avaya Web site to access the complete range of services and support that Avaya provides. Go to www.avaya.com or go to one of the pages listed in the following sections.
Customer Service 16
About the Avaya 1140E IP Deskphone About the Avaya 1140E IP Deskphone Your Avaya 1140E IP Deskphone brings voice and data to the desktop by connecting directly to a Local Area Network (LAN) through an Ethernet connection. In this guide, self-labeled line/programmable feature key labels appear beside the keys, and context-sensitive soft key labels appear directly above the keys. Figure 1 shows self-labeled line/programmable feature keys and context-sensitive soft keys.
About the Avaya 1140E IP Deskphone For information about context-sensitive soft keys, see Avaya Features and Services Fundamentals (NN43001-106). Note: Some Avaya 1140E IP Deskphone phones are not configured to support soft key functionality. Consult your system administrator.
About the Avaya 1140E IP Deskphone 1.1-compliant USB hubs are supported, including USB 2.0 hubs, if they offer USB 1.1 backwards compliancy. • automatic network configuration • Graphical XAS • hearing aid compatibility • wireless headset support using a Bluetooth® 1.2 wireless technology compliant Audio Gateway (Headset Profile, Bluetooth Power Class 2).
About the Avaya 1140E IP Deskphone Telephone controls Figure 2 shows the Avaya 1140E IP Deskphone. Figure 2: Avaya 1140E IP Deskphone This section describes the controls on your Avaya 1140E IP Deskphone. In some geographic regions, the Avaya 1140E IP Deskphone is offered with key caps that have English text labels. In this document, text in parentheses indicates the labels that appear on the key caps, for example, (Services). 20 Context-sensitive soft keys are located below the display area.
About the Avaya 1140E IP Deskphone When a triangle appears before a soft key label, the feature is active. Press the More key to access the next layer of context-sensitive soft keys (self-labeled). The keys on either side of the LCD display area are self-labeled line/programmable feature keys, with labels on the LCD. These keys also function as line (DN) keys. A steady LCD light beside a line (DN) key indicates that the line is active.
About the Avaya 1140E IP Deskphone (Mute) Your Mute key functionality is enabled or disabled by your system administrator. Contact your system administrator to determine if your Mute key is enabled. If your Mute key is enabled, press the Mute key to listen to the receiving party without transmitting. Press the Mute key again to return to two-way conversation. Note: If your Mute key is not enabled, pressing the Mute key places the call on hold.
About the Avaya 1140E IP Deskphone Use the Navigation keys to scroll through menus and lists appearing on the LCD display screen. The outer part of this key cluster rocks for up, down, left, and right movements. Use Up and Down to scroll up and down in lists, and the Left and Right keys to position the cursor.
About the Avaya 1140E IP Deskphone (Headset) (Headset) (Goodbye) Press the Headset key twice to open the Bluetooth Setup menu. If Bluetooth wireless technology is not enabled on your phone, this menu is not available. Use the Goodbye key to terminate an active call. When a message is waiting, the red Visual Alerter/Message Waiting indicator lights. Also, when the ringer sounds, this indicator flashes.
About the Avaya 1140E IP Deskphone (Shift/Outbox) Press the Shift/Outbox key to toggle between two feature key pages and to access an additional six lines/features. This function is not available on all phones; consult your system administrator. (Msg/Inbox) Press the Message/Inbox key to access your voice mailbox. This function is not available on all phones; consult your system administrator. (Directory) Press the Directory key to access directory services.
About the Avaya 1140E IP Deskphone (Services) Press the Services key and use the navigation keys to access the following items: • Telephone Options: — — — — — — — — — — — — — — — Volume adjustment Contrast adjustment Language Date/Time Display diagnostics Local Dialpad Tone Set Info Diagnostics Call Log Options Ring type Call Timer On hook default path Change Feature Key Label Name Display Format Live Dialpad — Caller ID display order — Normal mode indication 26
About the Avaya 1140E IP Deskphone • Password Admin: — Station Control Password (Services) The Password Admin menu is not available on all Avaya 1140E IP Deskphone phones. Consult your system administrator. (continued) • Display Network Diagnostics Utilities Only your system administrator or service provider can use Display Network Diagnostics Utilities to perform Internet diagnostics.
About the Avaya 1140E IP Deskphone Telephone display Your Avaya 1140E IP Deskphone has three display areas: • The upper display area provides labels for the six self-labeled line/ programmable feature key labels. • The middle display area contains single-line information for items such as caller number, caller name, Call Timer, feature prompt strings, user-entered digits, date and time information, and IP Deskphone information.
About the Avaya 1140E IP Deskphone the phone. For information about provisioning the IP Deskphones, see Avaya Communication Server 1000 IP Deskphones Fundamentals (NN43001-368). Call features and Flexible Feature Codes Some features are not available on all IP Deskphones. Call features and Flexible Feature Codes (FFC) must be assigned to your IP Deskphone and supported by system software. Contact your system administrator to configure these features and codes on your IP Deskphone.
About the Avaya 1140E IP Deskphone • if listening on the handset, placing the handset on hook • if listening on the headset, pressing the Headset key • by pressing the Cancel soft key • by pressing any Line or Feature key WML Browser support The Avaya 1140 IP Deskphone includes a WML Browser. This browser supports the display of WML pages containing text and images from your administrator. You can also use it in the same way as you would use a browser on a smartphone.
About the Avaya 1140E IP Deskphone The WML Browser supports basic HTTP authentication. If you connect to a WML page that requires authentication, the browser leads you through the authentication steps. When you are browsing, the following soft keys on your IP Deskphone can appear: • Home: Pressing this soft key causes the page defined in the WML Home field to display. • Refresh: Pressing this soft key causes the current page to reload, including a complete refresh of the deck.
About the Avaya 1140E IP Deskphone Table 1: WML softkey display Soft key 1 Soft key 2 Soft key 3 Soft key 4 Page Loaded, WML Home configured, no page-defined soft keys Home Refresh (blank) (blank) Page Loaded, WML Home configured, one page-defined soft key Home Refresh (blank) Page Loaded, WML Home configured, two page-defined soft keys Home Refresh Page Loaded, WML Home configured, three page-defined soft keys <
About the Avaya 1140E IP Deskphone Table 1: WML softkey display Condition Page Loaded, WML Home configured, five page-defined soft keys Soft key 1 Soft key 2 Soft key 3 Soft key 4 More Home More Refresh (blank) (blank) More Some web pages enable you to use Click to Dial from the browser.
About the Avaya 1140E IP Deskphone Security features The following security features are available on your Avaya 1140E IP Deskphone: • Using encrypted calling • Managing your Station Control Password (SCPW) Using encrypted calling Your Avaya 1140E IP Deskphone supports secure communication using SRTP media encryption. If the feature is enabled, a security icon (q) appears on the screen when your call is secured using SRTP media encryption.
About the Avaya 1140E IP Deskphone 3. Press the Enter key. 4. Use the dialpad to enter your password at the prompt. 5. Press the Up/Down keys to scroll and highlight New Password. 6. Press the Enter key. 7. Use the dialpad to enter the new password. 8. Press the Select soft key to accept the new password. If you are locked out of your Avaya 1140E IP Deskphone, or if you forget your SCPW, contact your system administrator. Note: The default configuration for Password Protection is off.
About the Avaya 1140E IP Deskphone 2. Press the Up/Down navigation keys to scroll and highlight Change Protection Mode. 3. Use the dialpad to enter your password (if Password Protection is enabled). 4. Press the Enter soft key. 5. Press the Up/Down navigation keys to scroll and highlight one of the following: — Enable Password Protection — Disable Password Protection 6.
Entering and editing text Entering and editing text You can enter and edit text on your Avaya 1140E IP Deskphone using the following methods: • “Entering text using the IP Deskphone dial pad” on page 37 • “Entering text using the USB keyboard” on page 38 • “Editing text using the soft keys” on page 38 The use of any of these methods for text entry or editing depends on the application. Table 2 shows the applications and input devices that you can use for text entry.
Entering and editing text Entering text using the USB keyboard You can use the USB keyboard, when connected, to enter text in the tools and graphical applications. For number entry in phone applications (for example, when dialing), you can use the keyboard to enter digits (0 to 9), as well as * and #. Other characters are ignored. When on a call, you can use the function keys (f1, f2, f3, f4, f5, f6, f7, and f8) to control the IP Deskphone.
Entering and editing text To edit an entry in your Personal Directory, press the Directory key, and select the desired entry from your Personal Directory. To edit text with the soft keys: 1. Press the Edit soft key. 2. Press the Left/Right navigation keys to move through the text. 3. Select the appropriate editing soft key for the operation you want to perform. 4. If the character you want is not visible, press the More soft key to access the next layer of soft keys. 5.
Connecting the components Connecting the components Figure 4 shows connections on the Avaya 1140E IP Deskphone. Figure 4: Avaya 1140E IP Deskphone connections WARNING Ensure that the protective rubber cap on the Accessory Expansion Module port is in place when the port is not in use. Connecting anything other than the proper Avaya 1100 Series Expansion Module connector to this port can cause damage to the IP Deskphone.
Connecting the components Before you begin CAUTION Damage to Equipment Do not plug your Avaya 1140E IP Deskphone into a regular phone jack. This results in severe damage to the IP Deskphone. Consult your system administrator to ensure that you plug your IP Deskphone into a 10/ 100BaseT Ethernet jack. CAUTION Your Avaya 1140E IP Deskphone is designed for use in an indoor environment only.
Connecting the components Figure 5: Release the Avaya 1140E IP Deskphone from the stand Use the following steps to connect the components of your phone. 1. Remove the stand cover. Pull upward on the center catch as indicated in Figure 6 on page 43, and remove the stand cover. The cable routing tracks are now accessible.
Connecting the components Figure 6: Remove the stand cover 2. Connect the global power supply (optional). Connect the global power supply to the AC adapter jack in the bottom of the phone. Form a small bend in the cable, and then thread the adapter cord through the channels in the stand. WARNING Use only the approved Avaya Global Power Supply with your 1140E IP Deskphone. Note 1: Your 1140E IP Deskphone supports AC power or Power over Ethernet (PoE) options, including IEEE 802.3af standard power.
Connecting the components the CAT5 cable, your connected LAN must support PoE. If you use PoE, you do not require an AC adapter. Note 2: You must use CAT5e (or later) cables if you want to use gigabit Ethernet. 3. Install the handset. Connect the end of the handset cable with the short straight section into the handset. Connect the end of the handset cable with the long straight section to the back of the phone, using the RJ-9 handset jack marked with the symbol +.
Connecting the components Figure 7: Cable routing tracks and mounting holes 8. Wall-mount your phone (optional). Your Avaya 1140E IP Deskphone can be mounted either by: (Method A) using the mounting holes on the bottom of the phone stand, or (Method B) using a traditional-style wall-mount box with RJ-45 connector and 15-cm (6-inch) RJ-45 cord (not provided).
Connecting the components mounting screws, and then tighten the top screws. See Figure 7 on page 45. Method B: Attach the 15-cm (6-inch) CAT5e cable, position the stand over the mounting rivets, and slide the phone down the wall so that the rivets fit into the slots on the stand, indicated in Figure 7 on page 45 (Method B). 9. Replace the stand cover. Ensure that all cables are neatly routed and press the stand cover into place until you hear a click. 10.
Connecting the components 47
Virtual Private Network Virtual Private Network A Virtual Private Network (VPN) is a network that uses a public network infrastructure, such as the Internet, to provide you with secure access to the private network of your organization. The IP Deskphone VPN feature allows you to connect to your organization’s private network from a public or remote network. For example, you can use your home public Internet connection to connect to your organization’s private network.
Virtual Private Network — .bin files (for example: 0625C7C.bin) • Java Virtual Machine (JVM) version 1.5 or later must be installed on your PC. Check Start, Settings, Control Panel, Java to see if JVM is installed on your machine and the version of it. If it is not installed, contact your system administration to help you to install it. To download the latest JVM, go to www.java.com.
Virtual Private Network Figure 8: IP Deskphone connected to the modem Figure 9: IP Deskphone connected to the router 50
Virtual Private Network Figure 10: IP Deskphone connected to the wireless access point and modem Note: If your home network is not configured as described in the above figures, contact your system administrator for assistance. Note: You cannot connect multiple PCs directly to the PC port on the IP Deskphone. Note: The Avaya Phone VPN Configuration Wizard requires direct communication with the IP Deskphone on the network.
Virtual Private Network Installing and configuring VPN Use the following procedure to install and configure VPN on your IP Deskphone. Note: Depending on the version of software installed on your IP Deskphone you may need to upgrade the software on the IP Deskphone prior to configuring the VPN feature. To install and configure VPN 1. Follow the instructions provided by your system administrator to obtain the required files. 2. Power-down the IP Deskphone. 3. Run the Avaya Phone VPN Configuration Wizard.
Virtual Private Network 4. Select your language preference. The following languages are supported: • Arabic • Chinese - simplified • Chinese - traditional • Czech • Danish • Dutch • English • Finnish • French • German • Greek • Hebrew • Hungarian • Italian • Japanese - Katakana • Japanese - Kanji • Korean • Latvian • Norwegian • Polish • Portuguese • Russian • Spanish • Swedish • Turkish 5. Click Next.
Virtual Private Network The Equipment Setup and VPN window appears, as shown in Figure 12. Figure 12: Equipment Setup and VPN window 6. Verify that the modem, IP Deskphone, and PC are connected properly. 7. Disconnect any VPN connection currently running on your PC. See Figure 4 on page 40 to confirm that your LAN Ethernet Port and PC Ethernet Port on the IP Deskphone are connected correctly.
Virtual Private Network Figure 13: Locate Data Files window 9. Click Browse to locate the provisioning files provided by your system administrator, if the wizard was not able to locate the files. 10. Click Next. The Prepare Phone for Configuration window appears as shown in Figure 14 on page 56.
Virtual Private Network Figure 14: Prepare Phone for Configuration window 11. Power on your IP Deskphone. Note: Depending on the current software version on the IP Deskphone “Listening Mode” may not be detected. If your phone does not enter “Listening Mode”, follow the steps below. 12. After you hear the chimes tune and the text AVAYA appears on the IP Deskphone display screen, quickly press the following keys in order. Mute Mute 13. Verify that the IP Deskphone displays Listening Mode.
Virtual Private Network The Prepare Phone for Configuration (Try again) window appears, as shown in Figure 15 on page 57. Figure 15: Prepare Phone for Configuration (Try again) window a. Power off your IP Deskphone and power it back on again. 14. After you hear the chimes tune and the text AVAYA appears on the IP Deskphone display screen, quickly press the following keys in order. Mute Mute Note: The IP Deskphone can take up to 60 seconds for “Listening Mode” to appear in the display area. b.
Virtual Private Network IP Deskphone requires a software upgrade in order to proceed. Click No to proceed to a software upgrade. Follow the next steps to perform a software upgrade on your phone. The Prepare Phone for Configuration window appears as shown in Figure 16. Figure 16: Prepare Phone for Configuration window c. Double-press the Services key on the IP Deskphone quickly. Select the Network Configuration menu item.
Virtual Private Network d. If you are able to navigate to the Provision: or (TFTP IP:) parameter, and edit this field, click Yes. The Prepare Phone for Configuration (Input Provisioning Server IP address) window appears, as shown in Figure 18 on page 60. OR If you are not able to navigate and edit the address in Provision: or (TFTP IP:) in the Network Configuration menu or you were not able to edit this field, click No. The Prepare Phone for Configuration (Alternate Provisioning Server) window appears.
Virtual Private Network click Yes. Observe the Provision: or (TFTP IP) address, as shown in Figure 18 on page 60. This is the IP Address of your PC running the Wizard tool. Use the IP Deskphone keypad to enter the Provision: or (TFTP IP) address of the provisioning server. Note: To enter a dot (period) when entering an IP address using the IP Deskphone keypad, press the 1 key repeatedly or you can doublepress the asterisk (*) key.
Virtual Private Network The progress bar displays the percent complete of the software transfer. h. Restart your IP Deskphone. i. Click Next. j. Go back to Step 12 on page 56 and repeat the steps. 15. When the Autodiscover Phone window appears, as shown in Figure 19 on page 62, click Autodiscover Phone to discover connected IP Deskphones. Note: Click Stop to stop the search. The text “Searching for connected phones” displays while the connected IP Deskphones are located.
Virtual Private Network Figure 19: Autodiscover Phone window 16. Click Next. If more than one connected IP Deskphone was discovered, the Autodiscover Phone (More than one phone was discovered) window appears. See Figure 20 on page 63.
Virtual Private Network Figure 20: Autodiscover Phone (more than one phone was discovered) window a. Obtain the MAC address of the IP Deskphone for which you are configuring the VPN. The MAC address is printed on a label located on the back of the IP Deskphone. b. Select the IP Deskphone to configure from the drop-down list. c. Click Next. 17.
Virtual Private Network Figure 21: Configure phone window The progress bar displays the percent complete of the provisioning file transfer. Configuring phone is displayed during the file transfer. 18. When Phone configuration complete is displayed, click Next. The Confirmation & Finish window appears. See Figure 22 on page 65.
Virtual Private Network Figure 22: Confirmation & Finish window 19. Verify that the IP Deskphone is successfully configured. Note: You may be prompted to enter a User ID and Password before the IP Deskphone registers with the system. This information is provided by your system administrator. The following list provides character key mappings. Key Generates 0 0 1 _-.!@$%&+& ^\1 2 abcABC2 3 defDEF3 4 ghiGHI4 5 jklJKL5 65
Virtual Private Network Key Generates 6 mnoMNO6 7 pqrsPQRS7 8 RUVTUV8 9 wxyzWXYZ 9 * ., - + = ^ ; : ‘ \ “ * # {}|()<>[]# a. Look for the following information on the IP Deskphone display: — Date — Time — Type of call server — Directory number b. Lift the IP Deskphone handset and listen for a dial tone.
Configuring Telephone Options Configuring Telephone Options Your Avaya 1140E IP Deskphone Services menu lists the following submenus: • The Telephone Options menu enables you or your system administrator to configure IP Deskphone preferences. The Telephone Options menu offers the options shown in Figure 23. • The Password Admin menu enables you or your system administrator to change the Station Control Password (SCPW).
Configuring Telephone Options Using the Telephone Options menu Use the Telephone Options menu to access the following: • “Adjusting the volume” on page 69 • “Adjusting the display screen contrast” on page 70 • “Selecting a language” on page 71 • “Selecting date and time format” on page 72 • “Accessing display diagnostics” on page 73 • “Choosing a local dialpad tone” on page 73 • “Viewing IP Deskphone information” on page 74 • “Diagnostics” on page 75 • “Configuring call log options” on pag
Configuring Telephone Options 3. Press the Enter key. 4. Press the Up/Down navigation keys to scroll and highlight an option (for example, Language…). 5. Press the Enter key. The display provides information required to adjust your selection. 6. Choose one of the following: — Press the Select soft key to save changes and return to the Telephone Options menu. or — Press the Cancel soft key to keep existing configurations.
Configuring Telephone Options 2. Press the Enter key. or 3. To increase or decrease the volume, do one of the following: — Press the Down and Up soft keys. or — Press the Up/Down navigation keys. 4. Choose one of the following: or — Press the Select soft key to save the volume level and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations.
Configuring Telephone Options To adjust the display screen contrast: or 1. To increase or decrease the display contrast level, choose one of the following: — Press the Down and Up soft keys. or — Press the Up/Down navigation keys. 2. Choose one of the following: or — Press the Select soft key to save the changes and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations.
Configuring Telephone Options To select a language: 1. Press the Up/Down navigation keys to scroll and highlight the desired language (for example, German [Deutsche]). Note: Some languages may not be installed on your IP Deskphone. Contact your system administrator for more information about available languages. 2. Choose one of the following: or — Press the Select soft key to save the desired language and return to the Telephone Options menu.
Configuring Telephone Options 2. Choose one of the following: — Press the Select soft key to save the format and return to the Telephone Options menu. or — Press the Cancel soft key to keep existing configurations. Accessing display diagnostics The Display diagnostics option tests the IP Deskphone display screen and indicator lights.To access Display diagnostics, press the Services key, select Telephone Options, and select Display diagnostics. To use Display diagnostics: 1.
Configuring Telephone Options To choose a local dialpad tone: 1. Press the Up/Down navigation keys to scroll and highlight one of the following dialpad tones: — None to disable all tones — Short Click to enable a single tone for all keys — DTMF to turn on a separate DTMF tone for each key 2. Choose one of the following: or — Press the Select soft key to save the tone selection and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations.
Configuring Telephone Options To view IP Deskphone information: 1. Press the Up/Down navigation keys to scroll through the list to view IP Deskphone information. 2. Press the Cancel soft key to return to the Telephone Options menu.
Configuring Telephone Options Configuring call log options Use the call log option to configure the following preferences: • “Configuring the Callers List log” on page 76 • “Configuring New Call Indication” on page 77 • “Configuring Preferred Name Match” on page 78 • “Configuring Area Code Setup” on page 79 Configuring the Callers List log You can configure the Callers List to log all incoming calls including calls while your IP Deskphone is busy, or only unanswered calls.
Configuring Telephone Options To log all incoming calls including calls while IP Deskphone is busy: To log all incoming calls including calls while your IP Deskphone is busy, press the Services key and select Call Log Options from the Telephone Options menu. 1. Press the Up/Down navigation keys to scroll and highlight the Incoming Calls option. 2. Press the Select soft key. 3. Press the Up/Down navigation keys to scroll and highlight Log calls if busy. 4.
Configuring Telephone Options 5. Press the Up/Down navigation keys to scroll and highlight one of the following: — New call indication off — New call indication on 6. Choose one of the following: or — Press the Select soft key to save the configuration. — Press the Cancel soft key to keep existing configurations. Configuring Preferred Name Match You can configure your Avaya 1140E IP Deskphone to display the name of the caller as defined in your Personal Directory.
Configuring Telephone Options 4. Choose one of the following: — Press the Select soft key to save the configuration. or — Press the Cancel soft key to keep existing configurations. Configuring Area Code Setup Use the Area Code Setup menu to save up to three area codes.
Configuring Telephone Options 5. Use the dialpad to enter the number at the prompt. 6. Choose one of the following: or — Press the Select soft key to save the configuration. — Press the Cancel soft key to keep the existing configurations. To edit area code display: 1. Press the Up/Down navigation keys to scroll and highlight Area Code Setup. 2. Press the Enter key. 3.
Configuring Telephone Options 6. Choose one of the following: — Press the Select soft key to save the configuration. or — Press the Cancel soft key to keep existing configurations. Choosing a ring type The Ring type… option configures the IP Deskphone ring tone. To choose a ring type, press the Services key, select Telephone Options, and select Ring type… To select a ring type: 1. Press the Up/Down navigation keys to scroll and highlight one of the ring types. 2.
Configuring Telephone Options Enabling or disabling Call Timer The call timer measures how long you are on each call. To enable Call Timer, press the Services key, select Telephone Options, and select Call Timer. To enable or disable Call Timer: 1. Choose one of the following: or — To turn on the call timer, press the On soft key. — To turn off the call timer, press the Off soft key. 2.
Configuring Telephone Options 2. Choose one of the following: or — Press the Select soft key to save the default path and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations. Changing feature key labels The Change feature key label option renames the label displayed next to each feature key or restores the default labels to the keys (collectively or individually).
Configuring Telephone Options 3. Enter the new information for the feature key label. To enter special characters, press the Up navigation key. For information about entering text, refer to “Entering text using the IP Deskphone dial pad” on page 37. 4. Choose one of the following: — Press the Select soft key to save the changes and return to the Telephone Options menu. or — Press the Cancel soft key to keep existing configurations.
Configuring Telephone Options 6. Use the Up/Down navigation keys to scroll and highlight one of the following: a. Restore all key labels — Press the Yes soft key to change all feature keys to default values. b. Restore one key label — Press the Select soft key. — Press the feature key. — Press the Yes soft key to change the selected feature key label to the default value. Note: If labels are changed to default values, you cannot undo the change. The label configurations must be reentered.
Configuring Telephone Options 2. Press the Enter key. 3. Press the Up/Down navigation keys to scroll and highlight one of the following: — first name, last name — last name, first name 4. Choose one of the following: or — Press the Select soft key to save the configuration. — Press the Cancel soft key to keep existing configurations.
Configuring Telephone Options 3. Press the Up/Down navigation keys to scroll and highlight one of the following: — On — Off (default) 4. Choose one of the following: or — Press the Select soft key to save the configuration. — Press the Cancel soft key to keep existing configurations. Configuring Caller ID display order Caller ID display order appears in 2 formats: • Number, name (default) • Name, Number Use the following procedure to configure Caller ID display order. 1.
Configuring Telephone Options 1. Press the Services key, select Telephone Options, and select Normal mode indication. 2. Press the Up/Down navigation keys to scroll and select one of the following: — On — Off 3. Press the Select soft key to save the configuration, else press the Cancel key to cancel the modifications.
Configuring Local Menu options Configuring Local Menu options Note: Many of the options discussed in this section are for administrator use only. Do not make any changes unless instructed by an administrator. Your system administrator can establish a password for the Local Tools menu. When the password is enabled, a password prompt dialog box appears when you attempt to access this menu. If this happens, contact your system administrator.
Configuring Local Menu options Table 5: Navigation key functions in menus (Part 2 of 2) Key Function Enter digits on the dialpad Select the associated menu item Stop soft key Close the menu The key functions in dialog boxes are described in Table 6.
Configuring Local Menu options Table 7: Navigation key functions in Edit mode (Part 2 of 2) Key Function Enter key Select the highlighted item in the Exit edit mode box Enter characters or digits on the dialpad Insert characters or digits at the current cursor position If you are using a USB mouse, you can right-click on the Telephony screen to open the Local Tools menu, and click on an item to select it. 1. Preferences submenu The Local Tools menu 1.
Configuring Local Menu options To adjust Contrast or Sleep settings: 1. Press the Up/Down arrow keys to scroll and highlight one of the following: — Contrast — Sleep Sleep appears in the format xxx, where xxx is a time in minutes or hours. 2. Press the Enter key. 3. Press the Up/Down arrow keys to increase or decrease the selected value.
Configuring Local Menu options Note: This language setting controls the language used in the local menus on your phone only. To select the language used by features on your phone, press the Services key, select Telephone Options, and select Language… To select the language used in the local menus, press the Services key twice to open the Local Tools menu, press the 1 key on the dialpad to select 1. Preferences, and press the 2 key on the dialpad to select 2. Language.
Configuring Local Menu options Each headset has its own tuning parameters, and your deskphone must be configured to use the proper parameters. If you do not configure the deskphone for the proper tuning parameters, you may not be taking full advantage of the audio qualities of the headset. Selecting Active Headset Device To select the Active Headset Device, press the Enter key. Press the Up/ Down navigation keys to select the desired headset. To select the active headset device 1.
Configuring Local Menu options To enable HID Commands: 1. Press the Up/Down navigation keys to scroll and highlight the Headsets menu. 2. Select the Enable HID Commands checkbox. 3. Choose one of the following: or — Press the Apply soft key to save the desired selection and return to the Telephone Options menu. — Press the Cancel soft key to keep existing configurations. 4. Press the Cancel soft key to exit to the main display. Changes are saved automatically.
Configuring Local Menu options To enable USB headset 1. Select the Headset option in the Preferences menu of the Avaya 1120E IP Deskphone, Avaya 1140E IP Deskphone, and Avaya 1150E IP Deskphone. See the following Figure. Making a change in the Headset menu page will take affect immediately, but only temporarily depending on what further action is taken. 2. Press the Apply button to make the changes permanent. 3. Press Cancel button to discard any changes.
Configuring Local Menu options 4. Select the appropriate headset type in the Active Headset Device field from a list of Wired, USB, or Bluetooth as depicted in the following figure. 5. Select the Enable HID Commands check box to provide full HID for supported headsets. 6. Select the Headset type from the following list of headsets.
Configuring Local Menu options Note: You can select the Headset Type only for the Avaya USB Headset Adapters. If the Avaya USB Headset Adapter is not detected, the Headset Type selection is disabled and cannot be modified. 7. Select the Back Light check box to control the backlight on the Avaya USB Headset Adapters. This check box is selected by default. Note: If the Avaya USB Headset Adapter is not detected this item is disabled and cannot be modified.
Configuring Local Menu options Bluetooth headset since this choice has been moved to the Headset menu. • Users of USB Audio on an Avaya 1120E IP Deskphone or Avaya 1140E IP Deskphone when connected to a BCM system may experience constant beeping from the wireless headsets if the user inadvertently hits a call control keys in error. • For the Avaya USB Adapters it is a requirement that the firmware of this device be V2.0.32 or later.
Configuring Local Menu options the dialpad to select 1. Preferences, and press the 3 key on the dialpad to select 3.Headsets. Note: The Headset type and Backlight options are only available when MHA is attached. Table 7 describes the features of the Avaya Mobile Headset Adapter. Table 8: Avaya Mobile Headset Adaptor elements and functions Key Function Answer key Press to answer an incoming call. If there is no incoming call, the Avaya 1140E IP Deskphone selects a line and you hear a dial tone.
Configuring Local Menu options the Headset key to open the Bluetooth Setup dialog box. You must be familiar with the operation of the navigation keys to work in the Bluetooth Setup dialog box; see the Navigation keys description on page 23. The Bluetooth Setup menu entry is not available on all phones. If the Bluetooth Setup menu entry appears dimmed, or fails to open when you double press the Headset key, the feature is not enabled on your phone.
Configuring Local Menu options 3. Put your Bluetooth technology headset in its pairing or search mode. The procedure for doing this can be different for each headset. Refer to the documentation that accompanied your headset, or contact the vendor.
Configuring Local Menu options 4. Search devices. a. Ensure that your headset is in Pairing or Search Mode. b. Press the Right navigation key twice, and highlight the Search button, displayed next to the Search Devices item. c. Press the Enter key. The message "Searching…." appears. It can take up to two minutes for the search to complete.
Configuring Local Menu options 5. When the name of your headset appears in the Found: box, press the Stop soft key or wait for the search to finish. When the search is complete, the message "Search Completed Found Device(s)" appears. 6. Choose one of the following: • If the name of your headset appears in the Found: box, proceed to step Step 7 on page 105. • If your headset is not displayed in the Found: box, select your headset from the list, as follows: a.
Configuring Local Menu options 7. Press the Right navigation key one or more times to highlight the Pair button (next to the Pair Device item) and press the Enter key. a. A dialog box appears, with the prompt "Enter PIN#". b. Use the phone dialpad to enter the PIN for the wireless headset and press the Enter key. Check your headset documentation to find its PIN (sometimes called a passkey). Typically this value is 0000.
Configuring Local Menu options 8. Choose one of the following: • If the headset is successfully paired with your phone, proceed to step Step 9 on page 107. To verify that the pairing was successful, ensure that the headset appears in the list next to the Paired: item. If pairing is successful, the message "Pair completed" also appears at the bottom of the screen. • If the headset is not successfully paired with your phone, an error message appears at the bottom of the screen.
Configuring Local Menu options 9. Choose one of the following: • If the name of your headset appears in the Paired: box, proceed to step Step 10 on page 108. • If more than one device is paired, and the one you wish to use is not shown in the Paired: box, navigate to the one you want, as follows: a. Press the Right navigation key one or more times to highlight the Paired: box. Press the Enter key to start the edit mode. b. Press the Up/Down navigation keys to open the list.
Configuring Local Menu options 10. Choose one of the following: • If only one headset is paired, proceed to step Step 11 on page 108. • If more than one wireless headset is paired, the first headset paired is automatically made the active device. To make a different headset active, do the following. — Press the Right navigation key one or more times to highlight the Set button (next to the Set Active Device item). — Press the Enter soft key. The message "Set active: “device name” appears.
Configuring Local Menu options Note: Unless you need to dual pair a headset, operating the headset with the 1140E is simpler if the headset is only used with its chargingonly base. The desktop IP Deskphone base should be powered off if it is not in use. Interaction with wired headsets If you connect a Bluetooth wireless technology headset and a wired headset to the same Avaya 1140E IP Deskphone, the “Use Bluetooth headset” item switches between the wired headset and the Bluetooth headset.
Configuring Local Menu options 3. Press the Enter key to toggle this option on or off. A check mark indicates that the wireless headset is used. Clear the check mark to use a wired headset. This option is on (o) by default. To unpair a wireless headset: (Headset) 1. Double-press the Headset key to open the Bluetooth Setup dialog box. 2. Press the Right navigation key to select the Paired: item.
Configuring Local Menu options 3. Choose one of the following: • If the name of your headset appears in the Paired box, proceed to step Step 5 on page 111. • If more than one device is paired, and your headset is not already displayed in the Paired box, do the following: a. Press the Right navigation key one or more times to highlight the Paired: box. Press the Enter key to open edit mode. b. Press the Up/Down navigation keys to open the list.
Configuring Local Menu options 2. Local Diagnostics submenu The Local Tools menu 2. Local Diagnostics submenu offers the following choices: • “1. IP Set Information” on page 112 • “2. Network Diagnostic Tools” on page 112 • “3. Ethernet Statistics” on page 112 • “4. IP Network Statistics” on page 113 • “5. USB Devices” on page 113 • “6. Advanced Diag Tools” on page 113 • “7. License Information” on page 113 • “8. VPN Information” on page 113 • “9.
Configuring Local Menu options 4. IP Network Statistics The IP Networks Statistics tool is used to view reports about network operation. This tool is for administrator use only. 5. USB Devices The USB Devices tool provides information about any Universal Serial Bus (USB) devices that you connect to your phone. Your Avaya 1140E IP Deskphone automatically detects USB devices when you connect them to the USB port in the back of the IP Deskphone.
Configuring Local Menu options 9. Certificate Information The system administrator can use the Certificate Information menu to view certificate information. This menu is for system administrator use only. 10. DHCP Information The system administrator can use the DHCP Information menu to view license information. This menu is for system administrator use only. 3. Network Configuration menu The Network Configuration tool displays information that was configured when the IP Deskphone was installed.
Configuring Local Menu options 4. Scroll down to DHCP and ensure it is checked. 5. Press Apply. The phone reboots. To configure the WML Browser: You will need information from your administrator in order to configure the browser. Your administrator may have already configured this information for you. 1. Press the Services key twice. 2. Enter the Admin password. 3. Select Network Configuration. 4. Scroll down to the WML Browser section. 5.
Configuring Local Menu options 4. Lock Menu Your system administrator can use the lock menu tool to protect the Local Tools menu items from accidental or unwanted changes. This tool is for administrator use only.
Making a call Making a call This section describes features associated with making a call.
Making a call 3. To terminate the call, choose one of the following: or — Return the handset to the cradle. — Press the Goodbye key. (Goodbye) Using On-hook dialing Use these steps to make a call by dialing before lifting the handset: 1. Leave the handset in the cradle. 2. Press the line (DN) key. 3. When the dial tone sounds, dial the number. 4. When the called party answers, lift the handset. 5. To terminate the call, choose one of the following: or — Replace the handset into the cradle.
Making a call Using handsfree dialing Use handsfree dialing to use a built-in microphone and speaker, or a headset, instead of the handset. While on an active call, you can switch between handset and handsfree mode. 1. Choose one of the following: — Press the Handsfree key. or — If a headset is connected, press the Headset key. 2. Dial the number. To discontinue a handsfree call: Press the Goodbye key. (Goodbye) To mute a handsfree call: (Mute) (Mute) 1. Press the Mute key.
Making a call To switch from handsfree to handset mode: Lift the handset. To switch from handset mode to handsfree mode: 1. Press the Handsfree key. 2. Replace the handset. To use a headset: 1. Connect the headset to the headset jack or the handset jack. 2. Press the Headset key. If you have a Bluetooth wireless technology headset installed, you can activate it by pressing the button on the headset. To release a call: (Goodbye) 120 1.
Making a call To switch from handsfree to headset: 1. Press the Headset key. Using the Directory applications You can make calls using the following Directory applications available on your Avaya 1140E IP Deskphone.
Making a call 2. Press the Search soft key to find the desired name. If the search is successful, the first match appears on the screen. 3. Choose one of the following: — Press the Dial soft key to dial the resulting number. — If there is no match to the search query, start a new search or change the information in the initial search. — Press the Cancel soft key to exit without dialing. To scroll to a specific number: 1.
Making a call To make a call using the Personal Directory: 1. Press the Up/Down navigation keys to scroll and highlight a name in the Personal Directory. 2. Choose one of the following: or — Press the Dial soft key to dial the resulting number. — Press the Cancel soft key to exit without dialing. Making a call using the Callers List The Callers List feature automatically stores up to a maximum of 100 callers.
Making a call Making a call using the Redial List The Redial List feature automatically stores a maximum of 20 previously dialed phone numbers. To use the Redial List, press the Directory key and select Redial List. For information on how to configure and use the Redial List, refer to “Using the Redial List” on page 178. To make a call using the Redial List: 1. Press the Up/Down navigation keys to scroll and highlight a name in the Redial List.
Making a call 3. Lift the Handset when the called party answers or, if in handsfree mode, begin to speak. To edit a Predial number: 1. Use the dialpad to enter the number. 2. Choose one of the following: — To erase all numbers, press the Clear soft key. Reenter the numbers to be dialed. or — To change one number at a time, press the Delete soft key to backspace. Re-enter the number. 3. Press a line key to dial the number.
Making a call 2. Using the dialpad, dial the phone number (including access code) to be stored on the selected AutoDial key. 3. Press the AutoDial key a second time to store the number on the selected key. After you store a number, the word Autodial disappears, and the stored number appears. 4. Assign a label to the key. After you assign the label, the number disappears and only the label appears on the screen next to the key. To display an AutoDial number: 1. Press the Display key.
Making a call Using Ring Again Use the Ring Again feature if you receive a busy tone, or if there is no answer. Your IP Deskphone rings when the person you called becomes available. Ring Again automatically redials the number. To activate Ring Again: 1. Dial a number and receive a busy tone or no answer. or 2. Choose one of the following: — Press the Ring Again soft key. — Enter the Ring Again Activate FFC. To call a Ring Again party when you receive notification: 1.
Making a call To deactivate Ring Again before notification: or Choose one of the following: • Press the Ring Again soft key a second time. • Press the Ring Again Deactivate FFC. Using Last Number Redial Use the Last Number Redial feature to automatically redial the last dialed number. To use Last Number Redial: Choose one of the following: — To redial using the handset: a. Lift the handset. b. Press the line (DN) key.
Making a call To store a Speed Call number: 1. Press the Speed Call Controller soft key. The triangular icon flashes, indicating programming mode. 2. At the prompt: — Enter a one-, two-, or three-digit code (0-999). — If required, dial the access code. — Enter the phone number (internal, external, or long-distance number). 3. Press the Speed Call Controller soft key again to save the code and number. The flashing icon turns off. To make a Speed Call: 1. Lift the handset. 2.
Making a call Using System Speed Call Use the System Speed Call feature to dial Speed Call codes that override dialing restrictions placed on your IP Deskphone. To make a System Speed Call: 1. Lift the handset. 2. Choose one of the following: or — Press the System Speed Call soft key. — Press the System Speed Call Controller (SScCtl) soft key. 3. Dial the Speed Call code to automatically dial the number. Using HotLine Use the Hot Line feature to automatically dial a specific number.
Making a call To make an intercom call: 1. Lift the handset. 2. Press the Intercom key. 3. Dial the one- or two-digit code for the desired intercom group member. To answer an intercom call while on a line other than your intercom group line: 1. Choose one of the following keys: (Hold) or (Goodbye) — Press the Hold key to put the current call on hold. — Press the Goodbye key to end the call. 2. Press the Intercom key and begin to speak.
Answering a call Answering a call Each incoming call causes the IP Deskphone to ring, the LCD indicator (R) beside the line (DN) key to flash, and the Message Indicator lamp to flash. To answer a call: Choose one of the following four options: • Lift the handset. • Press the Handsfree button located on the left side of the handset. • Press the line (DN) key beside the LCD indicator as it flashes. • Press the Headset key if a headset is connected to your IP Deskphone.
While on an active call While on an active call You can use the following features during an active call: • “Placing a call on hold” on page 133 • “Transferring a call” on page 134 • “Using Timed Reminder Recall” on page 135 • “Using Attendant Recall” on page 136 • “Using Call Park” on page 136 • “Recording a Calling Party Number” on page 139 • “Displaying incoming calls” on page 139 • “Tracing a malicious call” on page 140 Placing a call on hold Use the Hold feature when you are talking on
While on an active call Transferring a call Use the Transfer feature to redirect a call to the appropriate person. To transfer a call to a third party: 1. Press the Transfer soft key. The other party is put on hold and a dial tone sounds. The LCD indicator light flashes steadily. 2. Dial the DN number to which you are transferring the call or use the Personal Directory, Redial List, or Callers List to select a number to dial. 3.
While on an active call Using Timed Reminder Recall Use the Timed Reminder Recall feature to receive a reminder tone when a transferred call is not answered. To use Timed Reminder Recall: 1. Press the Transfer soft key. The call is put on hold. 2. Dial the number to which you are transferring the call. or 3. Choose one of the following to start the recall timer: — Press the Transfer soft key. — Replace the handset before the extension answers.
While on an active call or (Goodbye) 2. Choose one of the following: — Press the Transfer soft key and repeat the transfer. — If the transfer is picked up while you are on the line, press the Goodbye key to complete the transfer. Using Attendant Recall Use the Attendant Recall feature to contact an attendant during a call and to connect the caller to the attendant. To contact the attendant while on a call: (Goodbye) 1.
While on an active call To park a call on the System Park DN or your own DN: During an active call, press the Park soft key twice. The call is parked on your DN unless a System Park DN is enabled to automatically park calls on the system. To park a call on a DN other than the System Park DN or your own DN: 1. Press the Park soft key. 2. Dial the DN where you want to park the call. 3. Press the Park soft key. To park a call using the SPRE code or FFC: 1.
While on an active call 3. To use an alternate DN from the System Park DN or your own DN, dial the DN where you want to park the call. Otherwise, proceed to step 4. 4. Choose one of the following: or — Press the Transfer soft key. — Press the Conference soft key. To retrieve a parked call: 1. Lift the handset. 2. Press the Park soft key. 3. Dial the DN where you parked the call.
While on an active call Recording a Calling Party Number Use the Calling Party Number feature to record a caller number, or to charge a call to an account number, during an established call. To record a caller number for accounting purposes: 1. Press the Call Party soft key. The caller is placed on hold. 2. Dial a charge account number or the caller number. Note: For information on using the Charge soft key, see “Charging a call or charging a forced call” on page 163. 3.
While on an active call 2. Press the flashing line (DN) key. The call waiting information appears. If you are using another feature key, you can use the Display key to access information associated with those feature keys. Tracing a malicious call Use the Call Trace feature to trace nuisance calls within your system. This feature is not enabled on all Avaya 1140E IP Deskphones. Contact your system administrator to configure this feature on your IP Deskphone.
Incoming calls Incoming calls You can use the following features when you have an incoming call: • “Using Automatic Answerback” on page 141 • “Using Call Pickup” on page 141 • “Using Call Waiting” on page 143 Using Automatic Answerback When the Automatic Answerback feature is active, your IP Deskphone automatically answers in Handsfree mode after one ring; however, calls are not forwarded to the voice message service. To activate Automatic Answerback: Press the Automatic Answerback key.
Incoming calls or 2. Choose one of the following: — Press the Pickup key. — Enter the Pickup Ringing Number FFC. To answer an incoming call in another call pickup group: 1. Lift the handset. 2. Choose one of the following: — Press the Group Pickup soft key. — Enter the Pickup Group FFC. 3. Dial the pickup group number of the ringing IP Deskphone. To answer a call at a specific extension in any pickup group: 1. Lift the handset. or 2.
Incoming calls 3. Dial the DN of the IP Deskphone that is ringing (and that is not in your call pickup group). If the pickup DN or group number is invalid (an overflow burst tone sounds and the screen displays Goodbye and try again), press the Goodbye key. Using Call Waiting The Call Waiting feature alerts you to an incoming call by producing a tone. It also puts the current call on hold while you answer the new call. To answer an incoming call while on another call: (Hold) 1.
Incoming calls 2. Press the line (DN) key associated with the first call. If you do not have a Call Waiting key: (Goodbye) 1. Press the Goodbye key to end the current call. 2. Press the line (DN) key beside the flashing status icon to answer the incoming call.
While away from your desk While away from your desk You can use the following features when you are away from your desk: • “Using Call Forward” on page 145 • “Using Internal Call Forward” on page 147 • “Using Remote Call Forward” on page 148 • “Securing your IP Deskphone” on page 150 Using Call Forward Use the Call Forward feature to direct incoming calls to ring on another line (DN). If the IP Deskphone is in the process of ringing, the call cannot be forwarded.
While away from your desk Figure 24: Call Forward display Press OK to return to the idle screen or press Cancel to cancel Call Forwarding. To deactivate Call Forward: Choose one of the following: • or Press the Forward soft key and press the Cancel soft key. OR • 146 Lift the handset and enter the Call Forward All Calls Deactivate FFC.
While away from your desk To reinstate Call Forward to the same number: Press the Forward soft key twice. Using Internal Call Forward Use Internal Call Forward to accept only calls originating at internal DNs to ring at another DN. Calls originating outside your IP Deskphone system still ring at your IP Deskphone. Current incoming calls cannot be forwarded. To forward internal calls: or 1. Choose one of the following: — Press the Internal Call Forward key.
While away from your desk To deactivate Internal Call Forward: Choose one of the following: Z or — Press the Internal Call Forward key and press the Cancel soft key. — Lift the handset and enter the Internal Call Forward Deactivate FFC. To reinstate Call Forward to the same number: Press the Internal Call Forward key twice. Using Remote Call Forward Use the Remote Call Forward feature (from any IP Deskphone other than your own) to forward calls to any IP Deskphone.
While away from your desk 4. Dial your Station Control Password. A dial tone sounds. 5. Choose one of the following: — Dial your DN. or — To forward calls to the previous call forward phone number, press the # key. (Do not perform steps 6 and 7.) 6. Dial the number to which you are forwarding calls. If calls are forwarded to an invalid number, a fast busy signal sounds. 7. Press the # key. To deactivate Remote Call Forward: 1. Lift the handset. 2.
While away from your desk 4. Dial your Station Control Password. 5. After you hear the dial tone, dial your DN. 6. Press the # key. Securing your IP Deskphone Use the Electronic Lock feature to prevent others from making calls from your IP Deskphone. The Electronic Lock feature is controlled using your Station Control Password (SCPW). To change your Station Control Password, refer to “Security features” on page 34. To lock your IP Deskphone: 1. Lift the handset. 2.
While away from your desk 4. Choose one of the following: — If dialing locally, press the Goodbye key. (Goodbye) or — If dialing the FCC remotely, dial your DN. To unlock your IP Deskphone: 1. Lift the handset. 2. Dial the Electronic Lock Deactivate FFC. 3. Dial your Station Control Password. 4. Choose one of the following: (Goodbye) or — If dialing locally, press the Goodbye key. — If dialing the FCC remotely, dial your DN.
Talking with more than one person Talking with more than one person Use the following features to enable conversations between more than two people: • “Using the Call Join feature” on page 152 • “Setting up a conference call” on page 152 • “Using Conferee Selectable Display” on page 154 • “Using Group Call” on page 155 Using the Call Join feature Use the Call Join feature to connect a call to a current active call. This connection creates a conference between the two callers and yourself.
Talking with more than one person the conference feature supports depends on the configuration of your IP Deskphone. To set up a conference call: 1. While on a call, press the Conference soft key to place the party on hold. You hear a dial tone. 2. Dial the number of the person you want to add to the conference call. You can talk privately to the person you are adding at this time.
Talking with more than one person If the person you attempt to add to the conference is unavailable: 1. Press the Goodbye key. (Goodbye) 2. Press the line (DN) key beside the flashing status icon to return to your original call. Using Conferee Selectable Display Use the Conferee Selectable Display feature to list active conferees and disconnect a conferee from the conference call. To view active conferees: 1.
Talking with more than one person To disconnect a conferee: 1. While on a conference call, press the Conferee Selectable Display key until the conferee you want to disconnect appears on the screen. 2. Press the DN key on which the conference call is established. 3. Choose one of the following: (Goodbye) — For a single conferee, press the Goodbye key. If configured, the Conference Count Display returns an updated total count of conferees. The LCD indicator turns off.
Talking with more than one person 2. Press the Group Call key or enter the Group Call FFC. — The feature automatically calls all group members. The icon flashes until all members answer. — The phone numbers of the group members appear on the display as they answer. When the last person answers, the Group Call indicator lights steadily. — When a person in your group is on a conference call or another group call, they are not connected to your group call.
Talking with more than one person To end a group call: Press the Goodbye key. (Goodbye) Note: When the person who made the group call disconnects, the call terminates for all members of the group. However, the members of the group call can disconnect from the call and not affect other members on the call.
Working without interruption Working without interruption This section describes features that provide uninterrupted work time. Using Make Set Busy Use the Make Set Busy feature to make your IP Deskphone appear busy to all callers. To activate Make Set Busy: Choose one of the following: — Press the Make Set Busy key. or — Lift the handset and enter the Make Set Busy Activate FFC.
Working without interruption configuration. Contact your system administrator to learn which treatment is configured for your IP Deskphone. Figure 25: Deflect feature key If you press the Deflect key and no special call treatment has been configured, your caller receives a busy signal.
Additional call features Additional call features Contact your system administrator to determine if the following call features are available on your IP Deskphone.
Additional call features 3. Press the Goodbye key to end the call. (Goodbye) Using the Buzz signal Use the Buzz feature to notify another person of a call, a visitor, or a request. Two IP Deskphones that are linked together enable one person to signal the other. The person signaled hears a buzz. To buzz the IP Deskphone linked to your IP Deskphone: Press the Buzz key.The IP Deskphone linked to your IP Deskphone buzzes as long as you press the key.
Additional call features 2. Dial the Page Trunk Access Code to complete the connection to the page system. 3. Make your announcement. 4. Press the Goodbye key. (Goodbye) Using Centrex/Exchange Line Switchhook Flash Use the Centrex/Exchange Line Switchhook Flash feature during an established call to use a Centrex service, such as Call Transfer or ThreeWay Calling. To use Centrex/Exchange Line Switchhook Flash: 1. While on a call, press the Centrex Line Switchhook Flash key.
Additional call features Charging a call or charging a forced call Use the Call Charge feature to charge a call to a specific account. The Forced Charge feature charges long-distance calls from an IP Deskphone restricted to local calls. To charge a local or long-distance call to an account before you dial: 1. Lift the handset. 2. Choose one of the following: — Press the Charge soft key. — Dial the Call Detail Recording FFC. 3. Dial the charge account number. 4.
Additional call features 2. Choose one of the following: — Press the Charge soft key. or — Dial the Call Detail Recording FFC. 3. Dial the charge account number. 4. Press the line (DN) key to return to the call. To charge a call to an account when you transfer a call: 1. Press the Transfer soft key. The call is placed on hold. 2. Choose one of the following: — Press the Charge soft key. or — Dial the Call Detail Recording FFC. 3. Dial the charge account number. 4.
Additional call features 5. Press the Transfer soft key when you hear the IP Deskphone ring. You can talk privately to the person at the transfer number before you press the Transfer soft key. To charge a call to an account when you add someone to a conference call: 1. Press the Conference soft key. The call is placed on hold. 2. Choose one of the following: — Press the Charge soft key. or — Dial the Call Detail Recording FFC. 3. Dial the charge account number. 4.
Additional call features 5. Press the Conference soft key. Note: You can talk to either party privately, press the Incalls key to talk to the originator or press the Conf key to talk to the transfer number. Alternating between these two keys alternates between the two parties. This needs to be done before pressing the Conf key twice.This also assumes AHA CLS Automatic Hold, is enabled on the handset.
Additional call features 2. Choose one of the following: or — Press the Override key again. — Enter the Override FFC again. The other two people on the call receive an override tone and a conference call is established between the three of you. If anyone disconnects, the other two people remain connected. (Goodbye) 3. To terminate the call, press the Goodbye key.
Additional call features 1. Choose one of the following: or — Press the Override key. — Enter the Override FFC to initiate a Forced Camp-on. The person you called receives a tone. You receive a ring signal or a busy signal, depending on the options chosen. You are now camped-on to the number you dialed. 2. Return the handset to the cradle. 3. When the person you called finishes the call, your IP Deskphone automatically dials the number and both IP Deskphones ring.
Additional call features 2. Choose one of the following: — Press the Override key. or (Goodbye) — Enter the Override FFC. The people in the targeted call receive a tone for approximately 1 second. After the Override feature joins you to the call, a short tone repeats every 16 seconds. 3. To terminate the call, press the Goodbye key. Using Privacy Release Use the Privacy Release feature to enable one or more people who share your DN to join a call.
Additional call features To use Automatic Preselection (Meet-me page): 1. Lift the handset. 2. Dial the Radio Paging Access FFC. The paging tone sounds (two beeps followed by a dial tone). 3. Dial the number of the party you want to page. After dialing, the ringback tone sounds. The paged person can use any IP Deskphone to enter a Radio Paging Answer FFC, plus their own DN number. (Goodbye) or 4.
Additional call features 2. Dial the Radio Paging Access FFC. The ringback tone sounds. The paged person can use any IP Deskphone to enter a Radio Paging Answer FFC, plus their own DN number. (Goodbye) or 3. If your call goes unanswered for a preset time period and a 15-second highpitched tone sounds, followed by silence, press the Goodbye key or replace the handset. To answer a Radio Page: If you carry a Radio Pager, a page indicates that someone dialed your DN.
Additional call features Using Voice Call Use the Voice Call feature to make an announcement through someone else’s IP Deskphone speaker. To make a voice call: 1. Lift the handset. 2. Press the Voice Call key and make the announcement. 3. Press the Goodbye key. (Goodbye) To respond to a voice call: Your IP Deskphone rings once and the caller's voice transmits through your speaker. Lift the handset.
Additional phone features Additional phone features The following features are described in this section: • “Using the Personal Directory” on page 173 • “Using the Callers List” on page 176 • “Using the Redial List” on page 178 • “Using Virtual Office” on page 180 • “Using Media Gateway 1000B” on page 189 Using the Personal Directory Use the Personal Directory feature to create and store up to 100 directory entries.
Additional phone features 3. Press the Next soft key. 4. Use the dialpad to enter the phone number. 5. Do one of the following: or — Press the Done soft key to save the new entry. — Press the Cancel soft key to return to the Add screen. To edit an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Edit soft key and perform your edits. 3.
Additional phone features To delete an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Delete soft key. 3. Choose one of the following: or — Press the Confirm soft key to delete the entry. — Press the Cancel soft key to return to the Personal Directory without deleting the entry. To search for an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2.
Additional phone features Using the Callers List The Callers List feature logs all incoming calls. The Callers List can store up to 100 entries. When the list is full, the system overwrites the oldest entry. Use the Callers List feature to review missed calls and to dial calls.
Additional phone features To dial an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Dial soft key. To delete an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Delete soft key. 3. Choose one of the following: or — Press the Confirm soft key to delete the entry. — Press the Cancel soft key to return to the Personal Directory without deleting the entry.
Additional phone features To delete the entire Callers List: 1. Press the Delete soft key. 2. Choose one of the following soft keys: or — Yes to delete the entire Callers List — No to return to the previous screen Using the Redial List The Redial List feature logs all outgoing calls. Redial List can stored up to 20 entries. When the list is full, the system overwrites the oldest entry. Use the Redial List feature to review calls made, and to redial previously dialed calls.
Additional phone features To dial an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Dial soft key. To delete an entry: 1. Press the Up/Down navigation keys to scroll and highlight the desired entry. 2. Press the Delete soft key. 3. Choose one of the following soft keys: or — Yes to delete the entry — No to return to the previous screen To delete the entire Redial List: 1. Press the Delete soft key. 2.
Additional phone features Using Virtual Office The Virtual Office feature provides a service you can use while you are away from your desk to transfer calls, and all your office IP Deskphone features, to a remote IP Deskphone. Virtual Office makes this possible by allowing you to use another IP Deskphone (the Remote phone) to log in to your own home or office IP Deskphone (the Office phone).
Additional phone features Table 9: Virtual Office connection availability Using IP Deskphone Possible to log in to the 1140E? IP Phone 2001 Yes, with restrictions Avaya 2033 IP Conference Phone Yes, with restrictions IP Phone 2002 Yes IP Phone 2004 Yes Avaya 2050 IP SoftPhone Avaya 2007 IP Deskphone Yes, with restrictions Yes Note: A Virtual Office login from an Avaya 1140E IP Deskphone to an Avaya 1120E IP Deskphone or Avaya 2050 IP Softphone is blocked in certain situations.
Additional phone features To activate Virtual Office on your Office IP Deskphone from your Remote IP Deskphone: (Virtual) 1. Press the Virtual soft key. 2. At the prompt, enter your user ID. 3. Press the Enter key. 4. At the prompt, enter the home Station Control Password (SCPW). If the user ID is not found locally, the message Locating Remote Server appears. After three failed login attempts, wait 1 hour before attempting to log in again, or contact your system administrator to reset your password.
Additional phone features Avaya 1140E IP Deskphone Office phone. All the features appear as they do on your Office Avaya 1140E IP Deskphone. Figure 27: Logged in to an Avaya 1140E IP Deskphone Figure 28 shows an Avaya 1120E IP Deskphone logged in as a Remote phone to an Avaya 1140E IP Deskphone Office phone. Fewer display lines are available on the 1120E, so the display provides less information.
Additional phone features Figure 28: Logged in to an Avaya 1140E IP Deskphone using an Avaya 1120E IP Deskphone Figure 29 shows an Avaya 2050 IP Softphone logged in as a Remote phone to an Avaya 1140E IP Deskphone Office phone. In this case, the information display is arranged in a different fashion, but all the information is visible at one time.
Additional phone features Using Virtual Office on your Office IP Deskphone Figure 30 shows the Avaya 1140E IP Deskphone display when the phone is logged out due to remote access. Figure 30: Office phone displays the message Logged Out When activated for Virtual Office by a Remote IP Deskphone, your Office IP Deskphone is logged out and no longer operational. If this is the case when you return to your office, you can disconnect the remote login and regain control of your Office phone.
Additional phone features To regain operation of a IP Deskphone being used for Virtual Office: Choose one of the following: — To completely disconnect your Office IP Deskphone from the Remote IP Deskphone: a. Press the Home key. b. Enter your User ID and password (this logs the Office IP Deskphone back on to your office network). or — Press the Virtual soft key to log in to another IP Deskphone, and your IP Deskphone becomes a Remote IP Deskphone.
Additional phone features Press Yes to allow the IP Deskphone to log out of Virtual Office or press No to remain logged in to Virtual Office and reset the IDLE timer. If no key is pressed, the IP Deskphone logs out of Virtual Office. Troubleshooting Virtual Office Virtual Office can cause error messages to display on-screen. Table 10 lists error messages and describes actions to correct the causes.
Additional phone features Table 10: Troubleshooting Virtual Office (Part 2 of 3) Displayed Message Probable Cause Actions Locked from Login Three failed attempts to enter the correct Station Control Password. Wait one hour for the lock to clear automatically, or notify system administrator to clear lock. Permission Denied (1) Remote IP Deskphone has no Station Control Password. Notify system administrator. Permission Denied (3) Incorrect User ID entered. Enter correct User ID.
Additional phone features Table 10: Troubleshooting Virtual Office (Part 3 of 3) Displayed Message Probable Cause Actions Server Unreachable (1) Network problem. Notify system administrator if the problem persists. Server Unreachable (2) Network problem. Notify system administrator if the problem persists. VOUD configured on TN Remote IP Deskphone does not have VOUA Class of Service. Notify system administrator.
Additional phone features Features such as Personal Directory, Redial List, and Callers List are not available when operating in Local Mode. When in Local Mode, the IP Deskphone displays the message LOCAL MODE. Using Test Local Mode Use Test Local Mode to check Local Mode functionality (make and receive IP Deskphone calls). Test Local Mode is useful when provisioning has changed for an IP Deskphone on an MG 1000B Controller. 1. Press the Services key. (Services) 2.
Additional phone features 3. Press the Enter key (the IP Deskphone registers back to the main office). Troubleshooting MG 1000B The MG 1000B can cause error messages to display on-screen. Table 11 lists error messages and describes actions to correct the causes. Table 11: Troubleshooting MG 1000B Display Message Probable Cause Actions Local Mode Test Local Mode. Press the Services key, and then select Resume Normal Mode. Network problem. Contact system administrator if problem persists.
Using Hospitality features Using Hospitality features Hospitality features are intended for hotel operations. Configuring Automatic Wake-Up Use the Automatic Wake-Up feature to receive a timed reminder call. From your IP Deskphone, you can program the system to automatically place a call to you at a predetermined time. When you answer the call, recorded music plays for up to 30 seconds, followed by a prerecorded announcement or the attendant. To enter the time for an Automatic Wake-Up call: 1.
Using Hospitality features To cancel an Automatic Wake-Up call: 1. Lift the handset. 2. Dial the Automatic Wake-Up Quit FFC. 3. Press the Goodbye key. (Goodbye) To verify the time for the Automatic Wake-Up call: 1. Lift the handset. 2. Dial the Automatic Wake-Up Verify FFC. 3. Dial the Automatic Wake-Up time in a 24-hour time format (hhmm). If your query matches the preset time, a confirmation tone sounds. To enter the time in a 24-hour time format, enter the hours followed by the minutes.
Using Hospitality features Activating Message Registration Use the Message Registration feature to read, change, or reset meters that log your hotel phone calls. To read meters: 1. Press the Message Registration key. 2. Dial the room Directory Number (DN). 3. Press the Message Registration key. To change a meter: 1. Press the Message Registration key. 2. Dial the room Directory Number (DN). 3. Dial the correct meter count. 4. Press the * key. 5. Press the Message Registration key.
Using Hospitality features To reset a meter to zero: 1. Press the Message Registration key. 2. Dial the room Directory Number (DN). 3. Press the * key. 4. Press the Message Registration key. Using Maid Identification Use the Maid Identification feature to track the cleaning status of rooms. The maid enters the information from the IP Deskphone in each room. To enter cleaning status: 1. Press the Room Status key. 2. Dial the Directory Number (DN) for the room.
Using Hospitality features 3. Dial one of the following cleaning status codes: 1 = Cleaning requested 2 = Cleaning in progress 3 = Room cleaned 4 = Room passed inspection 5 = Room failed inspection 6 = Cleaning skipped The interrupted dial tone sounds. 4. Press the * key. 5. Dial the Maid ID. If you dial the wrong Maid ID, press the * key and redial the ID. 6. Press the Room Status key. Displaying Room Status Use the Room Status feature to display the status of a room using the Display Module.
Using Hospitality features 2. Dial the Directory Number (DN) for the room. The DN appears followed by a two-digit code. The first digit indicates the occupancy status: 0 = Room vacant 1 = Room occupied The second digit indicates the cleaning status of the room: 1 = Cleaning requested 2 = Cleaning in progress 3 = Room cleaned 4 = Room passed inspection 5 = Room failed inspection 6 = Cleaning skipped 3. Press the Room Status key. Changing the status of a room: 1. Press the Room Status key.
Using Hospitality features 2. Dial the Directory Number (DN) for the room. The DN appears followed by a two-digit code. The first digit indicates the occupancy status: 0 = Room vacant 1 = Room occupied The second digit indicates the cleaning status of the room: 1 = Cleaning requested 2 = Cleaning in progress 3 = Room cleaned 4 = Room passed inspection 5 = Room failed inspection 6 = Cleaning skipped 3. Dial the status code for the room. A three-digit code appears.
Accessing External Server Applications Accessing External Server Applications Use External Server Applications to access a variety of applications directly from your Avaya 1140E IP Deskphone. To find out what features and services are available, contact your system administrator. Depending on what is available on your system, your phone can provide information; for example, local news and weather, stock market information, or traffic reports.
Accessing External Server Applications • Bulk Recording - For an active call or unregistered DN/Position ID, call recording is initiated even though the ROD key is not pressed. 1. Press the ROD key during an active call. 2. To stop the call recording, press the ROD key again. Using SAVE key Use the SAVE feature key to save the recording of an active call. This key is associated with the active user ID and is operational only if a call is active.
Accessing External Server Applications 3. Press the SAVE key to save the conversation.
Flexible Feature Codes (FFCs) Flexible Feature Codes (FFCs) Use Table 12 to track the FFCs assigned by your system administrator.
Quick Reference Card Quick Reference Card This chapter is the Quick Reference Card for the Avaya 1140E IP Deskphone. Print this chapter as a reference guide.
Quick Reference Card When notified RngAgn RngAgn Deactivate Trans Transfer Trans or Adjust volume (Volume +) (Volume -) Legend Icon Action ( ) Indicates the key cap text label. For example, (Message). Lift the handset, press the line (DN) key or the Handset key. Replace the handset, or press to end the call. (Goodbye) Dial a number. AutoDial Press a line/feature key. An icon flashes when a feature is being programmed. An icon lights steadily when a feature is active.
Quick Reference Card Services and Telephone Options menus Services menu (Services) Note: The Services menu contains the Telephone Options, Password Admin, Virtual Office, and MG 1000B menus. Some options are not available on all Avaya 1140E IP Deskphones. Consult your system administrator.
Quick Reference Card 206
Regulatory and safety information Regulatory and safety information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory and safety information To prevent radio interference to the licensed service, this device must be operated indoors only and should be kept away from windows to provide maximum shielding. Table 13 lists EMC compliance for various jurisdictions.
Regulatory and safety information Table 13: EMC compliance (Part 2 of 2) Jurisdiction Standard Description Japan Regulations for voluntary control measures. VCCI Table 14 lists Safety compliance for various jurisdictions. Table 14: Safety compliance Jurisdiction Standard Description United States UL 60950-1 Canada CSA 60950-1-03 Safety of Information Technology Equipment European Community EN 60950-1 ITE equipment - Safety - Part 1: General requirements Australia/New Zealand AS/NZS 60950.
Regulatory and safety information Other US/Canada: Hearing Aid Compatibility (HAC) as per FCC Part 68 This equipment complies with the CE Marking requirements. EU Countries: This device complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration may be obtained from http://support.avaya.com/css/ appmanager/public/support or Avaya Inc., 211 Mt. Airy Road, Basking Ridge, NJ 07920 USA.
Regulatory and safety information DenAn regulatory notice for Japan 211
Regulatory and safety information 212
Third party terms Third party terms Third Party Terms for UNIStim sw releases 4.1 thru 5.0 (Jan 2010 - Nov 2010) Certain portions of the product ("Open Source Components") are licensed under open source license agreements that require Avaya to make the source code for such Open Source Components available in source code format to its licensees, or that require Avaya to disclose the license terms for such Open Source Components.
Third party terms * * This software/database is a "United States Government Work" under the terms of the United States Copyright Act. It was written as part of the author's official duties as a United States Government employee and thus cannot be copyrighted. This software/database is freely available to the public for use. The National Library of Medicine and the U.S. Government have not placed any restriction on its use or reproduction.
Third party terms away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation\'s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.
Third party terms another language. (Hereinafter, translation is included without limitation in the term \"modification\".) Each licensee is addressed as \"you\". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program).
Third party terms to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
Third party terms or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6.
Third party terms Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and \"any later version\", you have the option of following the terms and conditions either of that version or of an
Third party terms want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the \"copyright\" line and a pointer to where the full notice is found. one line to give the program\'s name an
Third party terms OpenSSL The following component is licensed under OpenSSL license: OpenSSL 0.9.7b OpenSSL License /* ===================================================== * Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * * 1.
Third party terms * 6. Redistributions of any form whatsoever must retain the following acknowledgment: * "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Third party terms * * This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Third party terms * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Third party terms 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution.
Third party terms dealings in this Software without prior written authorization of the copyright holder. END OF TERMS AND CONDITIONS Libpng The following component is licensed under libpng license: Libpng 1.2.37 - June 4, 2009 Libpng License This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail.
Third party terms libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors: Tom Lane Glenn Randers-Pehrson Willem van Schaik libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.
Third party terms consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage. Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions: 1. The origin of this source code must not be misrepresented. 2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source. 3.
Third party terms .\" This code is derived from software contributed to Berkeley by Chris Torek. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: .\" 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. .\" 2.
Third party terms Convert UTF ConvertUTF License Copyright 2001-2004 Unicode, Inc. Disclaimer This source code is provided as is by Unicode, Inc. No claims are made as to fitness for any particular purpose. No warranties of any kind are expressed or implied. The recipient agrees to determine applicability of information provided. If this file has been purchased on magnetic or optical media from Unicode, Inc., the sole remedy for any claim will be exchange of defective media within 90 days of receipt.
Third party terms Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of the nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Third party terms (2) If only executable code is distributed, then the accompanying documentation must state that "this software is based in part on the work of the Independent JPEG Group". (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library.
Terms you should know Terms you should know Avaya Communication Server 1000 Your office communication system. Calling Party Name Display Information appearing on the LCD display screen, such as the caller’s name and phone number. The system must have CPND enabled. Category 5 (Cat5) Cable and associated connecting hardware capable of transmitting at speeds up to 100 MHz, used by 10BaseT, 100BaseT4, 100BaseTX.
Terms you should know Date/time display The current date and time when the IP Deskphone is in an idle state. Directory Number (DN) A number consisting of one to seven digits for an IP Deskphone, and also known as an extension number. Feature display An area that shows status information about the feature in use. It also displays the name and status of the active session.
Terms you should know Interrupted dial tone A broken or pulsed dial tone that sounds when you access some features on your IP Deskphone. Message/Inbox A fixed key on your Avaya 1140E IP Deskphone that connects to your voice messaging system when the key is pressed. Navigation keys Keys used to scroll through menus and lists appearing on the LCD display screen. Off-hook Any line selected to make a call or receive an incoming call.
Terms you should know Special Prefix code (SPRE) Special codes entered using the dialpad, followed by a two-digit access code, that enable features (for example, Call Forward All Calls requires entry of SPRE code + 74). Special dial tone The three consecutive tones followed by dial tone that you hear when accessing IP Deskphone features.
Terms you should know Visual Alerter/Message Waiting indicator An LCD or an LED that flashes to indicate that a message is waiting or when the ringer is on.
Terms you should know 238
Index Index A About the Avaya 1140E IP Deskphone 17 Conferee Selectable Display and Disconnect 154 Conference call 152 Answer a call 132 Configure area code setup 79 Attendant Recall 136 Configure call log options 89 AutoDial 125 Configure Callers List log 76 AutoDial Transfer 160 Configure Name Display format 81 Automatic Answerback 141 Configure New Call indication 77 Automatic Wake-Up 192 Configure Preferred Name Match 78 B Connect the components 40 Buzz signal 161 Context-sensitive sof
Index Enter key 23 Local Diagnostics 112 Entering and editing text 37 Local Dialpad Tone 73 Expand key 23 Local Mode 189 External server applications 199 M F Maid Identification 195 Feature display 234 Make Set Busy 158 Fixed key 234 Malicious Call Trace 140 Flexible Feature Code (FFC) 234 Media Gateway 1000B 189 Flexible Feature Codes (FFCs) 202 Meet - me page 170 G Goodbye key 24, 234 Group Call 155 H Handsfree dialing 119 Headset key 23, 24 Help 15 Message (Inbox) key 25 Message key 2
Index Q T Quit/Stop key 24 Telephone display 28 Telephone information 89 R Telephone Options 68 Radio Page 169 Terms 233 Record a Calling Party Number 139 Test Local Mode 190 Redial List 122, 124 Transfer a call 134 Regulatory and safety information 203, 207 Remote Call Forward 148 Resume Normal Mode 190 Ring Again 127 Timed Reminder Recall 135 U USB keyboard function keys 38 User Interface 236 Ring type 83 Ringback/ring tone 235 V Room Status 196 Virtual Office 180 S Secure your teleph
Index 242
