EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification EM300 Module Module/Data Card integration guide Ver: 1.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Document Revision History Rev.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Wistron Coporation, Inc. makes no warranties, either expressed or implied, regarding this document, its merchantability, or its fitness, for any particular purpose. Legal Disclaimer This document and the information contained in the EM300 module& Design Guide (together, the “Information”) is provided to you by Wistron Corporationfor informational purposes only.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Table of Contents Reference Documents...................................................................................................................5 EM300 module.................................................................................................................5 3GPP References ......................................................................
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Reference Documents Phone module EM300 module Electromehcanical Specification Revision 1.0June 25, 2008 EM300 HW specification Version 1.1 June 25, 2008 3GPP References The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification [14] ITU-T Recommendation E.163: "Numbering plan for the international telephone service". [15] 3GPP TR 21.905: "Vocabulary for 3GPP Specifications". [16] 3GPP TS 31.102: "Characteristics of the USIM application.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Notices Safety Warning Neither the nor EM300 MODULE / Data Card products may be used in an environment where radio frequency equipment is prohibited or restricted in its use. This includes aircraft/airports, hospitals, and other sensitive electronic areas.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification vehicle. In some countries, operating such communication devices while in control of a vehicle is an offence. Under extended operation the and EM300 MODULE modem will generate a noticeable amount of heat. Like all PC Cards, the modem generates heat during normal operation and will be heated by the host computer.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification The exposure standard for Corporationdevices including mobile phones and Corporationmodems uses a unit of measurement known as the Specific Absorption Rate, or SAR. Tests for SAR are conducted using standard operating positions reviewed by the FCC with the device under test. This device is to be used only for mobile and fixed applications.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification legislation. The CE Mark is obligatory for products it applies to: the manufacturer affixes the marking in order to be allowed to sell his product in the European market.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Compliance & Certification Requirements PCS Type Certification Review Board (PTCRB) PTCRB Certification is mandated and the product is technically evaluated to meet the minimum requirements for registration on the PTCRB Operators’ networks.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Getting Started General The purpose of this document is to provide advance design and integration information to assist in the integration planning and evaluation of Wistron CorporationUSB Cards. This document is intended to specify key components of the integration tools available for the Wistron Corporationline of USB Cards.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification RoHS All hardware components fully compliant with EU RoHS Directive HSDPA features 3GPP Release 6 DL 7.2 Mbps, UL 384 kbps (HSDPA) UE CAT. [1-8], 11, 12 supported Compressed mode (CM) supported according to 3GPP TS25.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification SMS (for pc default non) x Point-to-point MT and MO x Cell broadcast x Text and PDU mode x Storage: SIM card plus 25 SMS locations in mobile equipment x Transmission of SMS alternatively over CSD or GPRS. Preferred mode can be user defined.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Remote SIM Access By case (Standard none support) EM300 supports Remote SIM Access. RSA enables EM300 to use A remote SIM card via its serial interface and an external application, in addition to the SIM card locally attached to the dedicated lines of the application interface.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Antenna 50Ohms. External antenna can be connected via antenna connector or solderable pad (support diversity and non-diversity default non diversity). Module interface Stand Mini PCI-Express USB Supports a USB 2.0 Full Speed (12Mbit/s) device interface.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification General The EM300 MODULE are designed to meet the EM300 module electro-mechanical card standard with some exceptions to accommodate the power requirements. These modules all support only the USB portion of the minicard standard. Chipset The MSM 6281 baseband processor, PM6658 power management IC, RTR 6285 shall be the chipset used for RF transceiver.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification ESTABLISHING COMMUNICATION WITH THE USB CARD AND DETERMINING THE COMPUTER COM PORT BEING USED Once the modem is powered up and connected, you should hear a sound indicating the computer has recognized the modem.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Setup Determining the Computer’s Active Primary COM Port To verify the computer’s recognition of the modem and to verify which Primary COM Port it is connected to, navigate to Start\Control Panel\Phone and Modem Options and then click on the Modems tab within the Phone and Modem Options window. Refer to Figure 2 below.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification now see the Wistron CorporationExpedite EM300 MODULE EDGE Modem, or something similar listed here. Refer to Figure 3 below. Now click on the “+” beside Ports (COM & LPT) to expand this item. You should now see the Wistron CorporationExpedite EM300 MODULE EDGE Status Port (COM XX) listed here. This is the Secondary or Status COM port Number.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Figure 3 – Device Manager Window Showing the Computer’s Active Status COM Port SETTING UP HYPERTERMINAL TO COMMUNICATE WITH THE MODEM Ensure that the Mini-card is still powered on with a USB connection to the computer, and that it is recognized by the computer as per the previous step. Open up a HyperTerminal session by navigating to Start\All Programs\Accessories
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification Type in a Connection Description title, such as the Active Primary COM Port number that was identified earlier - click ‘OK’.
EM300 Data Card Integration Guide R&D Division, Handheld & Mobile Communication, Taipei Design Center, Wistron Corp. Engineering Specification When the ‘COM XX Properties’ window comes up, just click on OK as there is no need to select or modify any of these settings. Refer to Figure 6 below: Figure 6 – HyperTerminal Properties Window Now the modem should be automatically connected, as will be indicated in the bottom left corner of the HyperTerminal window.