Users' Manual Product Name Bluetooth VoIP Phone Model CP20 (Brand: acer)
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Confidential !!! Spec Bluetooth : § Bluetooth v2.0 compliant or above. Radio: Carrier Frequency: 2.4~2.480GHz Spread Spectrum: FHSS (Frequency Hopping Spread Spectrum) Data Rate: 723K bps (Data channels) § (The maximum operating range depends on the environmental factors.) Operating Distance: § Up to10-meter maximum (33 ft) Operation Range (in open space) (The maximum operating range depends on the paired phone model, battery power, and environmental factors.
Knowing your Cardphone2 Confidential !!! Pick Up/Toggle to BT Audio BT Pairing/ Headset ó Speaker Volume Up/Previous Page Mic.
General Guide of your CardPhone2 Confidential !!! § Install BT driver w Before Cardphone2 can work, you should install BT driver first. § Prepare linking between PC and Cardphone2 w Turn on the power of CardPhone2 w Enable pair-linking § Install VCM w VCM is a middleware used to manage Cardphone2 and control IM application. § Function keys w Keys on Cardphone2 provide with different functions depending on the state it is on. But it is friendly with VCM installed.
Start pair-linking your CardPhone2 Confidential !!! 2 1 Pair-Linking Power on (Function Button) (Hang Up Button) a. To turn on your CardPhone2, press “Hang Up” button for a while. You can also turn it off by pressing “Hang Up” button for at least 2 seconds. b. CardPhone2 will be turned on with amber LED blinking. c. To start pair-linking, hold “Function” button for approximately 3 seconds. There will be a short tone if CardPhone2 is ready to be paired. d.
