Verizon Home Phone Base UserGuide Version 1
Federal Communication CommissionInterference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body. Safety Warnings Device When in use, the Verizon Home Phone Base should be placed at least 20 cm from the user. Adapter Do not use any other power adaptor except the one that accompanies this unit or a power adaptor identified in the list below.
Table of Contents Chapter 1 Introduction................................................................................................................................ 1 1.1 Unboxing Information ...................................................................................................................... 1 1.2 Key Features................................................................................................................................... 1 1.3 Front Side ..............................
Chapter 1 Introduction This chapter includes a list of items included with the Verizon Home Phone Base,, an overview of thedevice’s features, and a description of the user interface and ports on the device. device 1.1 Unboxing Information Inside the product package for the Home Phone Base, you should find the following items: • Verizon Home Phone Base • AC adaptor • Type-C USB cable • RJ11 cable 1.
1.4 Back Panel 1. Power Button The power button is used to reset the Home Phone Base as well as turn it on/off. • Turn on/off: Press the power button. • Reset: Press and hold down the power button for 10 seconds. The LED ring around the power button lights up in different ways to indicate the power and backup battery status of the device. 2. USB Type-C Port A USB Type-C cable connects to this port to power the Home Phone Base. 3.
Update(Triggered White Blinks during upgrade process through app or automatic upgrade, when device is plugged to AC power) (FOTA) Plugged to AC power and backup battery is charging Soft Blink White Not Applicable Plugged to AC power and batter is fully charged Solid White Not Applicable Hard reset / Reboot (after pressing the power button and before shutting down) Strong Blink White (For 1-2 seconds) Rapid Blink White (For 1-2 seconds) Powered OFF and Soft Blink plugged to AC White power OFF C
Chapter 2 Connecting the Home Phone Base This section describes how to set up and configure your Home Phone Base. 2.1 Setting up the Home Phone Base 1. Unbox the Home Phone Base, AC adaptor, and cables. 2. Attach the AC adaptor to one end of the USB Type-C cable, plug the AC adaptor into an electrical outlet, then plug the other end of the cable into the USB Type-C port on the Home Phone Base.
Chapter 3 Product Specifications 1. Connectivity Dimensions / Weight LTE B2/B5/B13/B4 (CAT 6) Height: 1.75 inches Diameter: 5.69 inches Weight: 0.95 lbs. Memory 1 Gbit (128MB) NAND Flash Removable: No Power 5V 2A Ports 1 USB Type-C 1 RJ11 Usage Time Standby Time: 24 hours LEDs Power button x 1 LTE signal indicator x 1 Operating Temperature 0 °C to 40 °C Package Dimensions & Weight 6.2 (L) × 10.2 (W) × 3.2 (H) in., 3 lbs.