n Advanced: Click Advanced button to view related info of SSID, Encryption, Current Power Level or Channel etc. 4.2 Diagnostics In Diagnostics tab, you can check Transmit and Receive Data: Multicast Packets, Broadcast Packets, Unicast Packets and Total Bytes.
Adapter Information n n n n n n Card Name: The name of the wireless network adapter. MAC Address: The MAC address of the wireless network adapter. Driver: The driver name and path of the wireless network adapter driver. Driver Version: The version of the wireless network adapter driver. Driver Date: The creation date of the wireless network adapter driver. Client Name: The name of the client computer.
Transmitted Frames: n Frames transmitted OK n Frames retried n Frames dropped n No ACK frames n ACK frames n RTS Frames n Clear-to-send (CTS) Frames n No CTS frames n Retried RTS frames n Retried data frames Received Frames: n Frames received OK n Beacons n Frames with errors n CRC errors n Encryption errors n Duplicate frames n AP mismatches n Data rate mismatches n Authentication time-out n Authentication rejects: the number of AP authentication failures received by the wireless network adapter n Associat
.3 Profile Management n n n n n n n n n Network Type: Indicates whether the current activated network type is Infrastructure or Ad Hoc mode. Security Mode: Indicates current connected network’s security mode. Network Name : Indicates current connected network’s name. New: To create new profile. Modify: To edit settings of chosen profile. Remove: To remove the chosen profile from the list. Activate: To activate the chosen profile. Import: To import a pre-set profile (pre-saved as a Config File *.
3. Edit the fields in the General tab to configure the configuration profile. n Profile Name: Identifies the configuration profile. This name should be unique. Profile names are not case sensitive. n n Client Name : Identifies the client machine. Network Names (SSIDs): The IEEE 802.11 wireless network name. This field has a maximum limit of 32 characters. Configure up to three SSIDs (SSID1, SSID2, SSID3). 4. Edit the fields in the Security tab to configure the configuration profile.
n n n n WPA Passphrase: Enables WPA Passphrase security. Click on the Configure button and fill in the WPA Passphrase. 802.1x: Enables 802.1x security. This option requires IT administration. Pre-Shared Key (Static WEP): Enables the use of pre-shared keys that are defined on both the access point and the station. None: No security (not recommended). 5. Edit the fields in the Advanced tab to configure the configuration profile. n Transmit Power Level: Selects the transmit power level for 802.11b/g in mW.
override allowing short frames. n Wireless Mode: Specifies 2.4GHz 54Mbps, 2.4GHz 11Mbps, or Super G operation in an access point network. The wireless adapter must match the wireless mode of the access point it associates to. n Wireless Mode when Starting Ad Hoc Network: Specifies 2.4GHz 54/11Mbps, to start an Ad Hoc network if no matching network name is found after scanning all available modes. This mode also allows selection of the channel the wireless adapter uses.
4.3.2 Removing a Profile 1. Go to the Profile Management tab. 2. Select the profile to remove from the list of configuration profiles. 3. Click Remove. 4.3.3 Profile Auto Selection n Including a profile in the auto selection feature allows the wireless adapter to automatically select that profile from the list of profiles and use it to connect to the network. n Including a profile in auto profile selection: 1. On the Profile Management tab, click Order Profiles. 2.
4. 5. 6. 7. Click OK. Check the Auto Selected Profiles box. Save the modified configuration file. With Auto Profile Selection enabled, the wireless adapter scans for available networks. The highest priority profile with the same SSID as a found network is used to connect to the network. On a failed connection, the client adapter tries with the next highest priority profile.
4.4 Security 4.4.1 Using EAP-TLS Security To use EAP-TLS security in the Utility, access the Security tab in the Profile Management window. 1. On the Security tab, click WPA/WPA2 or 802.1x. 2. Select EAP-TLS from the drop-down menu. 4.4.2 Enabling EAP-TLS Security To use EAP-TLS security, the machine must already have the EAP-TLS certificates downloaded onto it. Check with the IT manager. 1. Click Configure. 2. Select the appropriate certificate authority. Select Server Properties.
4.4.4 Enabling EAP-TTLS Security To use EAP-TTLS security, the machine must already have the EAP-TTLS certificates downloaded onto it. Check with the IT manager. 1. Click Configure. 2. Select the appropriate certificate from the drop-down list and click OK. 3. Specify a user name for EAP authentication: ü Enter an EAP user name in the User Name field to use a separate user name and password and start the EAP authentication process. 4.
4.4.5 Using PEAP(EAP-GTC) Security To use PEAP-GTC security in the WLAN 802.11g Utility, access the Security tab in the Profile Management window. 1. On the Security tab, click WPA/WPA2 or 802.1x. 2. Select PEAP(EAP-GTC) from the drop-down menu. 4.4.6 Enabling PEAP(EAP-GTC) Security To use PEAP-GTC security, the server must have the PEAP-GTC certificates, and the server properties must already be set. Check with the IT manager. 1. Click Configure. 2.
5. Click Advanced and Advanced Configuration window appears. ü Enter the Specific Server or Domain name of the server from which the client will accept a certificate. ü The login name used for PEAP tunnel authentication fills in automatically as PEAP-XXXXXXXXXX, where XXXXXXXXXX is the computer’s MAC address. Change the login name if needed. 6. Click OK. 7. Enable the profile. 4.4.7 Using PEAP-MSCHAP V2 Security To use PEAP-MSCHAP V2 security in the WLAN 802.
3. Specify a user name for inner PEAP tunnel authentication: ü Enter a PEAP user name in the User Name field to use a separate user name and start the PEAP authentication process. 4. Click Advanced and: ü Enter the Specific Server or Domain name of the server from which the client will accept a certificate. ü Change the login name if needed. 5. Click OK. 6. Enable the profile. 4.4.9 Using LEAP Security To use LEAP security in the WLAN 802.
2. Select LEAP from the drop-down menu. 4.4.10 Configuring LEAP 1. Click Configure. 2. Specify a user name and password: Option 1: Select to Use Temporary User Name and Password by choosing the radio button: (1) Manually Prompt for Leap User Name and Password is checked automatically. Option 2: Select to Use Saved User Name and Password by choosing the radio button: (1) Enter the user name and password. (2) Confirm the password. (3) Enter a specific domain name.
3. Check the Include Windows Logon Domain with User Name setting to pass the Windows login domain and user name to the RADIUS server (default). 4. Check No Network Connection Unless User Is Logged In to force the wireless adapter to disassociate after logging off (default). 5. Enter the LEAP authentication timeout time (between 30 and 500 seconds) to specify how long LEAP should wait before declaring authentication failed, and sending an error message. The default is 90 seconds. 6. Click OK. 7.
4.5 Display Settings To change the display settings, choose Options → Display Settings from the menu. The Display Settings dialog box contains tools to set the Signal Strength Display Units, Refresh Interval and Data Display. n Signal Strength Display Units: Sets the units used when displaying signal strength: percentage (%) or dBm. n Refresh Interval: Use the up/down arrows to set the display refresh interval in seconds. n Data Display: Sets the display to cumulative or relative.
4.6 Actions Tools Click Action from the menu to access the tools. n Enable/Disable Radio: Enable or disable the RF Signal. n Enable/Disable Tray Icon: Enable or disable the tray icon. Enabled: n n n Disabled: Manual LEAP Login: Log in to LEAP manually, if LEAP is set to manually prompt for user name and password on each login. See Chapter 4 Security for enabling LEAP. Reauthenticate: Reauthenticate to a LEAP-configured access point. Exit: Exit the Utility application. 4.
5. Right clicking the tray icon Right-click on the tray icon to access the following options: n n n n n n n n n Help: Open the online help. Exit: Exit the Utility application. Open Adapter Utility: Launch the Utility. Preferences: Set the startup options and menu options for the Utility. Check whether the program should start automatically when Windows starts, and check the menu items that should appear on the popup menu. Enable/Disable Radio: Enable or disable the RF Signal.
6. Network Application This section consists of the network applications of 802.11g USB 2.0 Adapter, including: 1. To survey the network neighborhood 2. To share your folder with your network member(s) 3. To share your printer with your network member(s) 4. To access the shared folder(s)/file(s) of your network members(s) 5. To use the shared printer(s) of your network member(s) In fact, the network applications of WLAN 802.11g USB 2.0 Adapter are the same as they are in a wired network environment.
6.2 File Sharing 802.11g USB 2.0 Adapter allows the sharing of files between computers that are logged onto the same wireless network. If you want to share your folder “My Documents” with other computers of the wireless network, please highlight the folder “My Documents” and drag it to Shared Documents folder. Sharing files in the IEEE802.11g wireless network will be like sharing files on a wired LAN.
6.3 Using the Shared Folder If you would like to access a shared folder stored in other stations of same network, please follow the process below: 1. Double-click the “My Network Places” icon, and then double-click the computer where the shared folder is located. 2. Double-click the folder you want to connect to. 3. Now you may open the needed file(s). NOTE! If a password is required, the Windows will prompt a password column to you.
6. Product Specifications Frequency range USA and Taiwan: 2400 – 2483.5MHz, Europe: 2400 – 2483.5MHz, Japan: 2400 – 2483.5MHz, Modulation technique 802.11b/g DSSS (DBPSK, DQPSK, CCK) OFDM (BPSK,QPSK, 16-QAM, 64-QAM) Host interface USB 2.0 Compatible with USB specification revision 2.0 A true "Plug & Play" connection supports hot swapping function. Get power directly from USB port No external power or batteries required Channels support 802.
11, 5.5, 2, 1 Mbps, auto-fallback, up to 54 Mbps 802.11g (Super mode) up to 108 Mbps Operation temperature 0 0C ~ 700C Storage temperature -200C ~ 800C Wi-Fi® Alliance WECA Compliant WHQL Microsoft® 2K, XP Compliant USB 2.0 IF USB 2.