Design Document Subject: UMC-SKV2C User Manual REV: 0.5 PAGE 1 OF 19 UMC-SKV2C User Manual The document contains proprietary information which is the property of Wistron NeWeb Corporation and is strictly confidential and shall not be disclosed to others in whole or in part, reproduced, copied, or used as basic for design, manufacturing or sale of apparatus without the written permission of Wistron NeWeb Corporation.
Design Document Subject: UMC-SKV2C User Manual REV: 0.5 PAGE 2 OF 19 Revision History Issue Date Version Description 2016/03/25 0.1 Initial Issued 2016/03/28 0.2 Add LTE P/D switch and appendix I 2016/03/30 0.3 Add assemble pictures including SMCC/Honey board/external antenna connection 2016/04/08 0.4 Update the control command for Zigbee 2016/04/26 0.
Design Document Subject: UMC-SKV2C User Manual REV: 0.5 PAGE 3 OF 19 Contents 1. 2. 3. Introduction .......................................................................................................................................... 4 Test Setup Configuration ..................................................................................................................... 5 2.1 Power Supply and Debug Console Connection ...................................................................... 5 2.
Design Document Subject: UMC-SKV2C User Manual REV: 0.5 PAGE 4 OF 19 1. Introduction This User Manual of Victor CB (Communication Board) module is to describe how to use the following sections for lab test by specific qualified engineers or technicians. Furthermore, this module is NOT intended for commercial use but designed as part of Smart Meter product which mainly provides 4G LTE WAN access and/or Zigbee HAN access capabilities.
Design Document Subject: UMC-SKV2C User Manual 2. REV: 0.5 PAGE 5 OF 19 Test Setup Configuration 2.1 Power Supply and Debug Console Connection Interface Board DUT (CB) Power on Sequence: I. Connect 30-pin-to-Jig-baord cable II. Attach AC-DC Adaptor & USB Debug Port Cable III.
Design Document Subject: UMC-SKV2C User Manual REV: 0.5 PAGE 6 OF 19 2.
Design Document Subject: UMC-SKV2C User Manual 2.3 Whole DUT connection Wistron Neweb Corporation Proprietary & Confidential REV: 0.
Design Document Subject: UMC-SKV2C User Manual REV: 0.5 PAGE 8 OF 19 2.
Design Document Subject: UMC-SKV2C User Manual REV: 0.
Design Document Subject: UMC-SKV2C User Manual 3. REV: 0.5 PAGE 10 OF 19 Zigbee Test 3.1 COM port Setup in a Windows Host PC Install PuTTy for connection to DUT, refer to http://www.putty.
Design Document Subject: UMC-SKV2C User Manual REV: 0.5 PAGE 11 OF 19 Serial Line: COMxx ; Speed: 115200 ; Connection Type: Serial Note: If there is no response when typing anything in the com port, please see the appendix I.
Design Document Subject: UMC-SKV2C User Manual REV: 0.5 PAGE 12 OF 19 3.2 Enter Zigbee Control mode Enter Zigbee control mode: ember-mfgtool 3.3 Zigbee Test Command Freq.
Design Document Subject: UMC-SKV2C User Manual REV: 0.5 PAGE 13 OF 19 LTE B4/B13 Test 4. It is suggested to use Anritsu MT8820C for RF conductive test For LTE radiation tests, the LTE antenna gain lists below. LTE Main Antenna Band 13 Peak Gain: 2.0 dBi ~ 2.5 dBi Band 4 Peak Gain: 4.5 dBi ~ 5.0 dBi LTE Diversity Antenna Band 13 Peak Gain: 2.0 dBi ~ 2.5 dBi Band 4 Peak Gain: 2.5 dBi ~ 3.0 dBi 4.
Design Document Subject: UMC-SKV2C User Manual 4.2 LTE Rx Primary/Secondary switch for OTA Login the cli mode (only in service mode 1,4) Telnet IP:192.168.0.1 Port: 35003 Wistron Neweb Corporation Proprietary & Confidential REV: 0.
Design Document Subject: UMC-SKV2C User Manual disable-primary-rx -p disable-secondary-rx -p restore-rx-default -p REV: 0.
Design Document Subject: UMC-SKV2C User Manual Appendix I Change System Service Mode for Serial Port Control Step 1: Confirm windows capture the device Wistron Neweb Corporation Proprietary & Confidential REV: 0.
Design Document Subject: UMC-SKV2C User Manual Step 2: Establish SSH connection by Putty in windows Hostname: root@192.168.0.1 port: 35001 Connection type: SSH Click “NO” for continue without saving ssh key Wistron Neweb Corporation Proprietary & Confidential REV: 0.
Design Document Subject: UMC-SKV2C User Manual Step 3: Login with one time password. Login with one time pass word Look up the corresponding password in the OTP list below. Ex: 9998 NOB YET HECK CAKE CUR MALE Enter command: newrole -t unconfined_t Look up the corresponding password in the OTP list below.
Design Document Subject: UMC-SKV2C User Manual REV: 0.