Design Document Subject: UMC-I210C User Manual REV: 2.3 PAGE 1 OF 12 UMC-I210C User Manual The document contains proprietary information which is the property of Wistron NeWeb Corporation and is strictly confidential and shall not be disclosed to others in whole or in part, reproduced, copied, or used as basic for design, manufacturing or sale of apparatus without the written permission of Wistron NeWeb Corporation.
Design Document Subject: UMC-I210C User Manual Revision History Issue Date Version Description 2015/04/16 0.0 Initial Issued 2015/04/30 0.1 Add freq. mapping table and tx output power setting 2015/05/06 0.2 Modify Zigbee Test Center Frequency Setting (i.e. CH. No.) 2015/05/06 1.0 Change document file name to match FCC application form 2015/05/12 2.0 Add LTE antenna gain table 2015/05/26 2.1 Add FCC Warning Message and Note for LTE antenna gain 2015/05/27 2.
Design Document Subject: UMC-I210C User Manual REV: 2.3 PAGE 3 OF 12 Contents 1. Introduction ..................................................................................................... 4 2. Test Setup Configuration ............................................................................. 5 2.1 Power Supply and Debug Console Connection ........................ 5 2.2 Antenna Connection ............................................................................ 6 2.
Design Document Subject: UMC-I210C User Manual 1. REV: 2.3 PAGE 4 OF 12 Introduction This User Manual of Victor CB (Communication Board) module is to describe how to use the following sections for lab test by specific qualified engineers or technicians. Furthermore, this module is NOT intended for commercial use but designed as part of Smart Meter product which mainly provides 4G LTE WAN access and/or Zigbee HAN access capabilities.
Design Document Subject: UMC-I210C User Manual 2. REV: 2.3 PAGE 5 OF 12 Test Setup Configuration 2.1 Power Supply and Debug Console Connection Interface Board AC-DC 5V Adaptor DUT (CB) USB Debug Port Console Power on Sequence: I. Connect 12-pin-to-Jig-baord cable II. Attach AC-DC Adaptor & USB Debug Port Cable III. Wait for 20 seconds when system ready (See Note 1) IV.
Design Document Subject: UMC-I210C User Manual REV: 2.3 PAGE 6 OF 12 2.
Design Document Subject: UMC-I210C User Manual REV: 2.3 PAGE 7 OF 12 2.
Design Document Subject: UMC-I210C User Manual 3. REV: 2.3 PAGE 8 OF 12 Zigbee Test 3.1 Setup socat Server in CB Device Telnet 192.168.0.1 into CB and run the commands below.
Design Document Subject: UMC-I210C User Manual REV: 2.3 PAGE 9 OF 12 3.2 Setup socat Client in PC host Unpack socat.7z and install into PC and change directory to that. Execute the commands below. D:\Test Tool\socat> socat - tcp4:192.168.0.1:6666 Press “ Enter “ twice. Note, the socat binaries compiled for windows can be found in http://blog.gentilkiwi.com/downloads/socat-1.7.2.1.
Design Document Subject: UMC-I210C User Manual REV: 2.3 PAGE 10 OF 12 3.3 Zigbee Test Command (Refer to Ember Node Test) Freq.
Design Document Subject: UMC-I210C User Manual Wistron Neweb Corporation Proprietary & Confidential REV: 2.
Design Document Subject: UMC-I210C User Manual 4. REV: 2.3 PAGE 12 OF 12 LTE B4/B13 Test It is suggested to use Anritsu MT8820C for RF conductive tests. For LTE radiation tests, the LTE antenna gain lists below. LTE Main Antenna Band 13 Peak Gain: 2.0 dBi ~ 2.5 dBi Band 4 Peak Gain: 4.5 dBi ~ 5.0 dBi LTE Diversity Antenna Band 13 Peak Gain: 2.0 dBi ~ 2.5 dBi Band 4 Peak Gain: 2.5 dBi ~ 3.
