User Manual

14. Oversize Packets: Indicates the number of packets received with exceeded 1518

bytes and contains a valid FCS and were otherwise well formed.

15. Total Fragments: Indicates the number of packets received, which are less than 64

bytes in length and contain an invalid FCS (include integral and non-integral

lengths).

16. Total Jabber: Corresponds to the number of packets received, which exceed the

1518 byte length and contain an invalid FCS (include alignment errors).

Transmitted Packets:

1. Total bytes: Indicates the number of received bytes in the frames.

2. Total packets: Indicates total number of transmitted packets.

3. Packet CRC Error: Indicates the number of packets transmitted with CRC Errors.

4. Multicast Packets: Indicates the number of Multicast packets being transmitted

successfully (excluded Broadcast packets).

5. Broadcast Packets: Indicates the number of Broadcast packets transmitted

(excluding Multicast packets)

6. Unicast Packets: Indicates the number of unicast packets that were transmitted

successfully.

7. Pause Frame: Indicates the number of pause control frames being transmitted.

8. SingleDefer Packets: Indicates the number of packets which were deferred on the

first transmission attempt and did not experience any subsequence collisions during

transmission.

9. MultiDefer Packets: Indicates the number of packets aborted which were defered

for an excessive period of time.

10. Single Collision: Indicates the number of single collision packets. The statistic

counter register is incremented during transmission.

11. Multi Collision: Indicates the number of Multiple Collision Packets. It is

incremented for each frame transmitted which had 2-15 collisions (including any

late collisions) during transmission.

12. Late Collision: Indicates the number of late collision packets. It is incremented for

each packet transmitted which had a late collision during a transmission attempt.

13. Excessive Collision: Indicates the number of Excessive Collision packets. It is

incremented for each frame which had 16 collisions during transmission and was

aborted.

14. Total Collision: Indicates the number of collisions occurred during the

transmission of a frame defined as the simultaneous presence of signals on the DO

and RD circuits.