User Manual

21
If you want to use the Access Point as a Repeater, select “Access Point
Client”, and enter a proper BSSID.
If you want to use the Access Point as a Bridge, select “ Wireless Bridge”.
a. Point to Point: Select Point to Point when the Access Point is
connecting to the network in which has only one Access Point.
b. Point to MultiPoint: Select Point to MultiPoint when the Access
Point is connecting to the network which has more than one Access
Point.
z Authorized Mac Addresses: Click Setup>Wireless LAN>Authorized Mac
Addresses.
1. Load file: used to retrieve the MAC address list from files.
2. Download: used to assign which MAC addresses are allowed to connect
to the Access Point.
3. Get: used to get all the MAC addresses of devices connecting to the
Access Point currently.
4. Authorization Table Enable: Check this box to implement the function.