WiSe 1210 Bluetooth Low Energy Module User’s Guide WiSe 1210 Bluetooth Low Energy User’s Guide Model: WISE1012A FCC ID: 2AG4NWISE1012A WiSilica Inc Proprietary and Confidential
WiSe 1210 Bluetooth Low Energy Module User’s Guide Table of Contents Introduction ............................................................................................................................................ 3 Bluetooth Low Energy Fundamentals ..................................................................................................... 3 Features ...........................................................................................................................................
WiSe 1210 Bluetooth Low Energy Module User’s Guide Introduction This chapter introduces the WiSe1210 Bluetooth Low Energy module which also includes some fundamentals concepts of Bluetooth Low Energy (BLE). The WiSe1210 Bluetooth® Low Energy Module is a single mode Bluetooth Smart module that complies with Bluetooth Core Specification v4.1.
WiSe 1210 Bluetooth Low Energy Module User’s Guide Features Bluetooth v4.1 specification complaint Support for Bluetooth 4.1 specification host stack 64kb of RAM and 64kb of ROM 16 MHz and 32.768 kHz clock system 32.
WiSe 1210 Bluetooth Low Energy Module User’s Guide Product Level Diagram: The below images shows the product level diagram of 2 Tone LED bulb and its assembly. WiSe 1210 Module Applications WiSe 1210 Bluetooth Smart enables connectivity and data transfer to leading smartphone, tablet and personal computing devices including Apple iPhone, iPad, iPod and Mac products and leading Android devices.
WiSe 1210 Bluetooth Low Energy Module User’s Guide Smart Mesh Light Application The Internet of Things (IoT) is the interconnection of uniquely identifiable devices within the existing Internet infrastructure. Typically, IoT is expected to offer advanced connectivity of devices, systems, and services that goes beyond machine-to-machine communications (M2M) and covers a variety of protocols, domains, and applications.
WiSe 1210 Bluetooth Low Energy Module User’s Guide • • LDR Sensor Temperature and Humidity sensor All the above sensors are integrated with WiSe1210 module, So once the sensor are is get triggered it will sent it’s respective command (ON/OFF in case of PIR Sensor) to the paired device of the particular sensor. Below figure show working Model before and after triggering.
WiSe 1210 Bluetooth Low Energy Module User’s Guide LDR Sensor is used for the ambient light control High Ambient Light Less Ambient Light WiSilica Inc Proprietary and Confidential
WiSe 1210 Bluetooth Low Energy Module User’s Guide Absence Of Ambient light As shown in above image the Intensity of the T5 tube is controlled by LDR sensor integrated with WiSe1210 module. Health Sensor The reduced power and cost of Bluetooth low energy technology enable many medical use models from the home to the hospital.
WiSe 1210 Bluetooth Low Energy Module User’s Guide As the technology is being implemented in almost all mobile devices, there is an opportunity to utilize off-the-shelf handheld devices and enable new use models that leverage off of the rich user interface and communication features of those platforms. Beacons Beacons are small indoor positioning devices that use low-energy Bluetooth (BLE) to communicate with a shopper's smartphone in the hopes of improving the in-store shopping experience.
WiSe 1210 Bluetooth Low Energy Module User’s Guide Module Pin Description PINS TP1 TP2 TP3 TP4 TP5 TP6 TP7 TP8 TP9 TP10 TP11 TP12 TP13 TP14 TP15 TP16 TP17 TP18 TP19 NAME SPI_MOSI SPI_MISO SPI_CSB SPI_PIO_SEL 3V3 PIO[11] PIO[10] PIO[9] SCL SDA PIO[3] SPI_CLK PIO[4] RX TX AIO[0] AIO[1] AIO[2] GND FUNCTION I O O I Power I/O I/O I/O I/O I/O I/O I O I/O I/O I/O I/O I/O Ground COMMENTS SPI data input or Programmable I/O SPI data output or Programmable I/O SPI select or Programmable I/O Programmable I/O pulle
WiSe 1210 Bluetooth Low Energy Module User’s Guide PWM Any of the Digital IO pins can be configured as PWM i.e (PIO[9] to PIO[11], PIO[3] and PIO[4]). Package Dimension: Dimension: 22.9x15mm Pitch: 1.5mm. Pad dimension 0.7x0.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
(OEM) Integrator has to assure compliance of the entire end‐product incl. the integrated RF Module. Additional measurements (15B) and/or equipment authorizations (e.g Verification) may need to be addressed depending on co‐location or simultaenous transmission issues if applicable. Integrator is reminded to assure that these installation instructions will not be made available to the end‐user of the final host device.
