Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual WISENMESHNET® L-Series VW Interface Node User Manual Model Name :6A07 Wuxi Wisen Innovation Co., Ltd. November 2019 www.wisencn.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual Revision History and Clarification Rev. Issue Date Revisions V1.0 01/11/2019 1 Issue st Written By Revised By Xiaoyan Huang Dr. Yan Wu Document Definition: It defines the specifications (i.e.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual Table of Contents 1. Product Introduction................................................................................................................................................... - 4 2. System Structure Layout ............................................................................................................................................. - 5 3. Node & Radio Features .......................
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual 1. Product Introduction ® The WISENMESHNET Vibrating Wire (VW) Interface Node is one of the key products in our ® patented WISENMESHNET geotechnical safety monitoring system. Working together with the WISENMESHNET ® gateway product and our customers VW type sensors, it intelligently delivers the real-time VW derived deformation of the structure to the information centre.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual 2. System Structure Layout Figure 2. System Structure Layout. www.wisencn.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual 3. Node & Radio Features Node Features: Basics Battery Power Qty. x 1 (3.6V Lithium primary D-Cell ER34615) Accuracy Stop Voltage 2.1VDC Mesh Stop Voltage 2.1VDC Battery Connection Standard Aluminium Battery Holder Working Current (DC) Max. 60mA (Typ. 48mA) Local Storage Min. 450 Messages during Meshing LxWxH 100 x 100 x 60mm Weight 0.60kg Cable Gland Qty.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual Temperature Range: -40 to 85°C, Accuracy: +/-1°C, typical 0.5°C; Resolution: 0.1°C Voltage Accuracy: +/-0.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual 4. Terminologies Figure 3. VW Interface Node Internal Configuration Terminologies. 5. Operation Procedures 5.1.System Deployment Notifications 1) Location: The deployment location of a VW Interface Node is usually determined by the required monitoring or inspection location; 2) Before any VW Interface Node is switched on, two tasks will need to be carried out: A.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual Gateway first, then nearby nodes, then further nodes. 3) During deployment, the Serial Number, i.e., SN of a node and the orientation of the VW sensors deployed against their site references must be recorded; 4) The connections between a customer chosen VW sensor and a Wisen VW Interface Node must strictly follow the rules stated in this document; 5) All the node should have its antenna point upwards. 5.
Wisen Innovation Technical Doc. No.2019 B. WISENMESHNET® L-Series VW Interface Node - User Manual The 5 wires from the cable are VW+, VW-, Thermistor (Temperature)+, Thermistor (Temperature)- and Ground. Please refer to the sensor datasheet to identify the purpose of the stripped wires. C. Untighten the gland cover, insert cable through the gland, then connect the 5 wires correspondingly as shown in the Figure below. D.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual 6.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual ii. Case Two: If all the actions from the list above have not cured the problem, please contact Wisen. We will be happy to help. 7. Package and Accessories Standard: No. Items Dimension (mm) Qty. 1 WISENMESHNET VW Interface Node 100x100x60 1 2 Mesh Antenna 200 1 3 Cap-Hex-Head Screw M6x14 4 4 User Manual* Downloadable from WISENMESHNET® 5 Inspection Report* Visualisation Platform. ® 8.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual Wrong orientation of a battery could potential cause unit damage. Notice : The orientation of battery can vary among products. When disconnecting the battery, please take special care not to apply excessive force, otherwise the battery holder and the nearby circuitry may be damaged. 3)Warning The battery in the product has a relatively high capacity, so please take special care during storage and usage.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series VW Interface Node - User Manual FCC Warning - This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.