User Manual

JET-R Module Manual

 JET-R acts as a receiver for 60GHz RF Module and works in pairs with a JET-T

transmitter.

 Be sure to design the position of the RF radiation direction facing the receiver.

 The material of case is recommanded for ABS and the thickness is recommended

less than 2mm .

 Full-HD (1080p / 60Hz) in HDMI format - Supports Video and Audio.

 This product can be used for fixed point-to-point communication only.

49mm

8mm

18mm

65mm

Module

configuration

50 pin connector

Part number : DF40C-50DP-0.4V

pin : HDMI signal, power, debugging signal, control signal

RF antenna

PAGE 1
JET-R Module Manual  JET-R acts as a receiver for 60GHz RF Module and works in pairs with a JET-T transmitter.  Be sure to design the position of the RF radiation direction facing the receiver.  The material of case is recommanded for ABS and the thickness is recommended less than 2mm .  Full-HD (1080p / 60Hz) in HDMI format - Supports Video and Audio.  This product can be used for fixed point-to-point communication only.
PAGE 2
Temperature Test / Connector Feathers Temperature test report Single Connector Features • Power: 3.
PAGE 3
RF radiation angle and Module/System Cable circuit RF radiation angle Module/System Cable circuit
PAGE 4
FPCB cable for connecting JET-T and IO-board Module/System Cable dimension  Flexible PCB Cable is recommanded.
PAGE 5
HDMI signal connection and module spec. Reference of HDMI signal Module spec. Operating frequency bandwidth Transmission distance Temperature 57GHz ~ 64GHz : channel 2(60.48 GHz), channel 3(62.64 GHz) 10M (depending on the state of the receiver) If there are objects between communication is disturbed. Operating Temperature : -10oC ~ 50oC, Storage Temperature : -10oC ~ 50oC Power consumption DC 3.3V / 1A dimension 65 x 18 x 4.
PAGE 6
PAGE 7