WT32-ETH01 DATASHEET Version 1.
WT32-ETH01 DATASHEET Disclaimer and Copyright Notice Information in this paper, including URL references, is subject to change without prior notice. This document is provided “as is” with no warranties whatsoever, including any warranty of merchantability, non-infringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal, specification or sample.
WT32-ETH01 DATASHEET Revision History Version Modified By Date V1.0 Mark Oct. 21, 2019 V1.1 Lin Fuliang Oct. 23, 2019 Reason Created the document Modified the document 3 Release Notes First release. Added the “Product Functions” chapter.
WT32-ETH01 DATASHEET Contents WT32-ETH01 ...................................................................................................................................................... 1 1. Overview........................................................................................................................................................... 6 2. Features ........................................................................................................................................
WT32-ETH01 DATASHEET 6.5 Bluetooth Function ...................................................................................................................................15 6.5.1 Bluetooth Data Transmission ............................................................................................................15 6.6 Wifi Function ............................................................................................................................................16 6.6.1 Internet Access ......
WT32-ETH01 DATASHEET 1. Overview WT32-ETH01 is an embedded serial port to Ethernet module based on ESP32 series launched by Wireless-Tag Technology Co. Limited. Integrating an optimized TCP/IP protocol stack, it makes it easy for users to accomplish the network access of embedded devices and greatly reduces the development time cost. Moreover, the module is designed to be compatible with half pads and through-hole connectors.
WT32-ETH01 DATASHEET Operating -40°C~+85°C temperature Ambient temperature Normal temperature Packaging Half pad/ Through-hole connector( Optional） Wi-Fi mode Station/softAP/SoftAP+station/P2P Wi-Fi security WPA/WPA2/WPA2-Enterprise/WPS mechanisms Encryption types AES/RSA/ECC/SHA Firmware Remote OTA upgrade via network update Software Software development SDK used for further development Networking IPv4、TCP/UDP protocol IP access methods Transparent transmission modes User configurations Stati
WT32-ETH01 DATASHEET 3. Hardware Specifications 3.1 System Block Diagram 3V3 IO Left Interface IO Right Interface TXP TXN RJ45 LAN8720A RMII WT32-S1 5V LDO 3V3 RXP RXN 烧录接口 50MHz Reference Clock Figure 1: System Block Diagram 3.
WT32-ETH01 DATASHEET Figure 2: Product Images 3.
WT32-ETH01 DATASHEET 4 RXD IO5, RXD2 5 TXD IO17, TXD2 6 GND GND 7 3V32 3V3 Power supply 8 GND GND 9 5V2 5V Power supply 10 LINK Network connection indicator pin 11 GND GND 12 IO393 IO39, Input only 13 IO363 IO36, Input only 14 IO15 IO15 15 I014 IO14 16 IO12 IO12 17 IO35 IO35, Input only 18 IO4 IO4 19 IO2 IO2 20 GND GND Note 1: The module enables high level by default. Note 2: Power supply makes a binary choice between 3V3 and 5V.
WT32-ETH01 DATASHEET ⚫ Power supply with breadboard connection; 2) Half pad (Directly welded to the board): Power supply of user board. 4. Instructions 4.1 Power-on Instruction If the Dupont line connection is used: Find the 3V3 or 5V power input port, and connect the corresponding voltage to it ; when LED1 indicator lights up, it indicates that power is on. 4.
WT32-ETH01 DATASHEET 5. Interface Descriptions 6. Product Functions 6.
WT32-ETH01 DATASHEET 6.2 Basic Functions 6.2.1 Set IP/ Subnet Mask/ Gateway 1. IP address is the identity representation of the module in the LAN, which is unique in the LAN, so it can not be repeated with other devices in the same LAN. There are two ways to obtain the IP address of the module: static IP and DHCP / dynamic IP. a. Static IP Static IP needs to be set manually by the user. In the process of setting, attention should be paid to write IP, subnet mask and gateway at the same time.
WT32-ETH01 DATASHEET 6.2.3 Firmware upgrades OTA remote upgrade is the way for modules to upgrade firmware, through which more application functions can be obtained. a. Firmware upgrade can be connected to the network through wired network or wifi. b. Operate GPIO2 to ground, restart the module, and enter OTA upgrade mode. c. After the upgrade is completed, disconnect GPIO2 from the ground, restart the module, and it enters the normal working mode.
WT32-ETH01 DATASHEET also be an IP address from a different LAN or an IP address across the public network. If connecting to a server across the public network, the server is required to have a public IP. 6.3.2 TCP Server It is usually used for communication with TCP client in LAN. It is suitable for the scenario where there is no server in the LAN and there are multiple computers or mobile phones requesting data from the server.
WT32-ETH01 DATASHEET 6.6 Wifi Function 6.6.1 Internet Access The module wifi is connected to the Internet or LAN through a router. The user configures the socket function through the AT command. The module can establish a TCP/UDP connection and then access the user's designated server. 6.7 Cable Network Access Function Stable network connection can be obtained through wired network to ensure stable network data acquisition. 6.7.
Federal Communication Commission Statement (FCC, U.S.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Information that must be placed in the end user manual: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules FCC Part 15 Subpart C 15.247 & 15.207 & 15.209 2.3 Specific operational use conditions The module is a Bluetooth module with WiFi & BR&EDR & BLE 2.4G function.
2.8 Label and compliance information Host product manufacturers need to provide a physical or e-label stating “Contains Transmitter Module FCC ID: 2AFOS-WT32-ETH01” with their finished product. 2.
