WT-01F User Manual Extreme / Open / Small / Easy Specification Version 1.
WT-01F DATASHEET FCC Requirement(FCC warning -‐ Module) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WT-01F DATASHEET Disclaimer and Copyright Notice Information in this document, including URL references, is subject to change without notice. THIS DOCUMENT IS PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER, INCLUDING ANYWARRANTY OF MERCHANTABILITY, NON-‐INFRINGEMENT, FITNESS FOR ANY PARTICULARPURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATIONOR SAMPLE.
WT-01F DATASHEET Amendment record Version V1.0 Changed by Louie Time Reason 2019.01.13 Original Details Wireless-Tag Technology Co.,Limited http://www.wireless-tag.
WT-01F DATASHEET Contents 1.Overview .......................................................................................................................................................... 6 2. Main Features ................................................................................................................................................. 6 3. Hardware Specifications .....................................................................................
WT-01F DATASHEET 1.Overview WT-‐01F Wi-‐Fi module is a low consumption, high performance Wi-‐Fi network control module designed by Wireless-‐Tag. It can meet the IoT application requirements in smart power grids, building automation, security and protection, smart home, remote health care etc.
WT-01F DATASHEET 3. Hardware Specifications 3.1 System Diagram 3.2Pin Description Figure-‐2 Physical Map Table 1 Pin Definition and Description Pin Name 1 ANT ANT 2 GND GND 3 ADC Detecting chip VDD3P3 supply voltage or ADC pin input voltage (not available at the same time).
WT-01F DATASHEET 16 RST Reset Pin, Active Low 17 VDD Module power supply pin, Voltage 3.0V ~ 3.
WT-01F DATASHEET Ratings Condition Value Unit Storage Temperature / -‐40 to 85 °C Maximum Soldering Temperature / 260 °C Supply Voltage IPC/JEDEC J-‐STD-‐020 +2.7 to +3.6 V 3.3.
WT-01F DATASHEET Modem Sleep 20mA Light Sleep 2mA Deep Sleep 20uA Off 0.5uA Standby Power Save Mode (2.4G) (Low Power Listen disabled) ¹ DTIM period Current Cons. (mA) T1 (ms) T2 (ms) Tbeacon (ms) T3 (ms) DTIM 1 1.2 2.01 0.36 0.99 0.39 DTIM 3 0.9 1.99 0.32 1.06 0.
WT-01F DATASHEET Output Power Pout PA output power in 11b mode PA output power at 72.2 Mbps 19.5 20.5 21.5 dBm 15.5 16.5 17.5 dBm 3.5.3RF Rx Characteristics Table-‐11RF Receiving Characteristics Mark Parameters Condition Min Value Typical Value Max Value Unit Frx Input Frequency — 2.412 — 2.
WT-01F DATASHEET Figure -‐4 Module Size Wireless-Tag Technology Co.,Limited http://www.wireless-tag.
WT-01F DATASHEET 4.2 Reflow Profile 4.3 Schematics Wireless-Tag Technology Co.,Limited http://www.wireless-tag.