WT-01E User Manual Extreme / Open / Small / Easy Specification Version 1.
WT-01E DATASHEET FCC Requirement(FCC warning -‐ Module) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WT-01E DATASHEET Disclaimer and Copyright Notice Information in this document, including URL references, is subject to change without notice. THIS DOCUMENT IS PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER, INCLUDING ANYWARRANTY OF MERCHANTABILITY, NON-‐INFRINGEMENT, FITNESS FOR ANY PARTICULARPURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATIONOR SAMPLE.
WT-01E DATASHEET Amendment record Version V1.0 Changed by Louie Time Reason 2019.01.13 Original Details Wireless-Tag Technology Co.,Limited http://www.wireless-tag.
WT-01E DATASHEET Contents 1.Overview .......................................................................................................................................................... 6 2. Main Features ................................................................................................................................................. 6 3. Hardware Specifications .....................................................................................
WT-01E DATASHEET 1.Overview WT-‐01E Wi-‐Fi module is a low consumption, high performance Wi-‐Fi network control module designed by Wireless-‐Tag. It can meet the IoT application requirements in smart power grids, building automation, security and protection, smart home, remote health care etc.
WT-01E DATASHEET 3. Hardware Specifications 3.1 System Diagram 3.2Pin Description Figure-‐2 Physical Map Table 1 Pin Definition and Description Pin Name 1 GND GND 2 VDD Module power supply pin, Voltage 3.0V ~ 3.
WT-01E DATASHEET 14 IO12 GPIO12; HSPI_MISO 15 IO14 GPIO14; HSPI_CLK 16 ADC Detecting chip VDD3P3 supply voltage or ADC pin input voltage (not available at the same time). Input voltage range 0~1V, the value range is 0~1024.
WT-01E DATASHEET 3.3Electrical Characteristic 3.3.1Maximum Ratings Table-‐ 4. Maximum Ratings Ratings Condition Value Unit Storage Temperature / -‐40 to 85 °C Maximum Soldering Temperature / 260 °C Supply Voltage IPC/JEDEC J-‐STD-‐020 +2.7 to +3.6 V 3.3.
WT-01E DATASHEET 3.4.2Standby Power Consumption The following current consumption is based on 3.3V supply and a voltage stabilizer, in 25°C ambient temperature. Values are measured at antenna port without SAW filter. All the transmission measurements values are based on 90% duty cycle, continuous transmission mode.
WT-01E DATASHEET 11g/n OFDM — 3.5.2 RF Tx Characteristics Table-‐10 Emission Characteristics Mark Parameters Condition Min Value Typical Value Max Value Unit Ftx Input Frequency — 2.412 — 2.484 GHz 19.5 20.5 21.5 dBm 15.5 16.5 17.
WT-01E DATASHEET Figure -‐4 Module Size Wireless-Tag Technology Co.,Limited http://www.wireless-tag.
WT-01E DATASHEET 4.2 Reflow Profile 4.3 Schematics Wireless-Tag Technology Co.,Limited http://www.wireless-tag.