First Alert® Model WX-TRS Remote Alert System for use with First Alert® Westward Alert Radios IMPORTANT PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE UNIT
TABLE OF CONTENTS INTENTS Pages TABLE OF CONTENT 2 IMPORTANT SAFEGUARDS 3 INTRODUCTION 4 INSTALLATION 5 LOCATION OF CONTROLS 7 OPERATION 8 NOTICE TO USERS 9 SPECIFICATIONS 10 SERVICE PROCEDURE " WARRANTY 1" CONTENTS IN THE PRODUCT PACKAGE In the Package, you would find: Remote Alert Receiver WX-RR1 Remote Alert Transmitter — WX-TR1 One AC Adapter — 12V Output One User's Manual est of Mounting Kit for Remote Alert Receiver une 9Y Alkaline Battery Contact the store from which you purchased the product or the
IMPORTANT SAFEGUARDS “Men using electrical appliances, basic safety precautions should always be follows including the following: {DANGER The Manufacturer does not represent this unit to be waterproof. To reduce the risk of fire, electric shock, or damage to the unit, do not expose this product to rain or moisture.
INTRODUCTION Congratulations on your purchase of the First Alert® Remote Alert System. This product is designed to exacting standards, which vied reliability long life and outstanding performance. This product is designed to work with the First Alert® Weather Alert Radio to extend the alert capability to multiple rooms in a household or in an office, including locations where reception of NOVA weather alert broadcast is not possible (e.g.
INSTALLATION == make the system work, you will have to get a Weather Alert Radio, one Remote Alert Transmitter and one {or more) Remote Alert savers. One transmitter could trigger siren and flashing light alert at unlimited number of receiver unis in a wireless working range of up fo 100 feet, dependent on environment. A} INSTALLATION OF REMOTE ALERT TRANSMITTER INSTALLING / REPLACING THE TRANSMITTER BATTERY Each transmitter comes with a 12-volt Size A23 alkaline battery installed in the factory.
NOTE: Select "ALKALINE" while a Ni-Cd battery is being installed will cause the low voltage indicator (yellow LED} fo operate “correctly. Insert the battery into the battery cap. Be careful to observe the correct polarity when Installing battery. CAUTION : Connecting the battery in reversed polarity may result in dice and permanent damage to the product. Place the battery in the battery compartment and replace the cover.
LOCATION OF CONTROLS — (LINE ART PICTURES) Noose Front View Flashing Light Battery Low Alert 110dB Siren DC 12V Power Jack Test Button — Battery selection switch Battery Cap Inside Battery Compartment Side View
OPERATION Flashing Light Window — The 3 super bright red color LED wil flash for 30 seconds when an alert signal is received from the transmitter. 2. Battery Low Alert — The amber color LED will flash i the voltage of the alkaline battery installed into the unit becomes low, indicating replacement is needed. 3. 110dB Siren — The piercing loud siren will sound for 30 seconds when an alert signal is received form the transmitter, 4. OC 12V Power Jack Connect fo the AC Power Adapter supplied with the package.
NOTICE TO USERS our system might cause interference to TV or radio even when it is operating properly. To determine whether your system is causing + interference, tum off your system. if the interference goes away, your system is causing the interference. NOTE: This equipment has been tested and found to comply with the Emits for a class B digital device, pursuant fo Part 15 of the FCG Rules.