Exhibit I: Users Manual Wireless Computing RF-150 Hanheld Mouse
HANDHELD RF-150 MOUSE INSTRUCTIONS 1. Install Battery. Insert one AA alkaline battery (included) in the handheld’s battery compartment. 2. Connect Receiver. Plug the black receiver into your computer’s USB port. If you see a series of dialog boxes about USB drivers, press Enter repeatedly to accept the standard USB drivers in Windows. Tip: Do not place receiver in an equipment cabinet or near other strong EMI sources. 3. Set Address. Press and release the address button on the bottom of the receiver.
TROUBLESHOOTING FCC INFORMATION Green LED on receiver is not lit This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.