Hardware Guide

ManualsBrandsWipelot Teknoloji Sanayi ManualsElectronics2.4 GHz Transmitter (802.15.4)

V.200.15

THIS DOCUMENT IS THE PROPERTY OF SANITAG COMPANY. IT MAY NOT BE COPIED AND REPRODUCED WITHOUT WRITTEN PERMISSION OF SANITAG

COMPANY. COPYRIGHT NOTICES MAY NOT BE REMOVED

Okyanus Technology computer & Software inc

Ali Rıza Gürcan Cadddesi. Alparslan İş Merkezi

No: 27/15 Merter - Güngöre, İstanbul

Tel: +90 (212) 481 96 22 Fax: +90 (212) 481 96 23

www.wipelot.com

Real Time Location System

Hardware Guide

(RTLS)

Contents

1. SETTING UP DEVICES & RF NETWORK ..................................................................... 1-1

1.1. Safety .................................................................................................................. 1-1

1.2. Introduction .......................................................................................................... 1-1

1.3. RF affecting factors .............................................................................................. 1-2

1.4 Collision Avoidance Device (Wipelot Model No: FT-05FL) ....................... 1-3

Summary of content (6 pages)

PAGE 1
Okyanus Technology computer & Software inc Ali Rıza Gürcan Cadddesi. Alparslan İş Merkezi No: 27/15 Merter - Güngöre, İstanbul Tel: +90 (212) 481 96 22 Fax: +90 (212) 481 96 23 www.wipelot.com Real Time Location System Hardware Guide (RTLS) Contents 1. SETTING UP DEVICES & RF NETWORK ..................................................................... 1-1 1.1. Safety .................................................................................................................. 1-1 1.2.
PAGE 2
1. SETTING UP DEVICES & RF NETWORK Rest of the manual guides you through the steps necessary for setting up and configuring your Wipelot devices. Please read this manual before system setup. 1.1. Safety The device must be used solely with its original power adaptor. Please note that the adapter is 110/220V AC 1.2. Introduction Wipelot devices are based on 2.4GHZ IEEE 802.15.4 compliant RF wireless network. To form a minimal 802.15.
PAGE 3
Calculated positions are being written on the Location Provider System database. These positions can also be used in real time by remoting technology. This architecture provides flexiblity in integration with third party softwares. Wipelot H-RTLS application comprises an independent service which listens the Location Provider System database. It interpretes fetched information and applies some business rules on it prior to UI interaction.
PAGE 4
1.4 Collision Avoidance Device (Wipelot Model No: FT-05FL) Wipelot FT-05FL Collision avoidance is high tech device which is measured distance of between vehicle and personal tags or forklift so that prevent collisions .
PAGE 5
How to comply with 10 second rule for hand held devices When the tag is “awake” it sends out a a signal from UWB. We call this “Hello” signal. If there are anchors (readers) in the area, they send an acknowledgement signal back. When the tag receives this acknowledgement, it sends the “location” signal (actual data) to the anchor and goes into “sleeping” mode. The tag awakens in determined period and send out a a signal from UWB again.
PAGE 6
Sound Alarm Distance Adjustment Buttons Distance of safezone Warning leds Power Figure 6: Wipelot FT-02FL Collision Avoidance Alarm Center Figure 7: Wipelot FT-05FL Collision Avoidance Reader