Installation Instructions

Usage: Function is not available
on this device.
More: Learn more about this app,
including an FAQ section.
Settings: To set your Wi-Fi power outlet,
transfer local Wi-Fi to cloud mode, or to
rename the WiOn Outlet.
Timer: To set ON/OFF programs (up to a
maximum of 12 Custom ON/OFF events).
Cloud Icon: Activates remote access
function of device through 3G, 4G, LTE,
public Wi-Fi network, or other Wi-Fi router.
Mailbox: To email consumer service or
share app feedback.
Programmable Timer: To set custom
ON-OFF events.
Countdown Timer: The controlled device
will turn off after selected time.
Astronomic Timer: The controlled device
will turn on or off at sunset or sunrise.
Vacation Random: The controlled device
will turn on or off randomly between one
of three time frames (night, day, all day).
Security Random: The controlled device
will turn on and off randomly between
chosen start and end times.
Indoor Wi-Fi Outlet
CAUTION! INDOOR USE ONLY! Do not use the WiOn
Outlet outdoors or in damp or wet locations.
READ ALL INSTRUCTIONS before using the WiOn Outlet.
!
Power Button
Press this button to
manually override the
WiOn Outlet and turn
the unit ON/OFF.
125 V ac / 60 Hz
15 A Resistive / 15 A General Use
1000 W Tungsten
1/2HP
500VA Electronic Ballast,
120 V ac 60 Hz, 8.3 A Ballast
Power Indicator
Receptacle for
controlled device
Select the Wi-Fi router that you want to
link to the WiOn Outlet. (Note: It may take
a few seconds for network communication).
Tap Smartphone’s
Settings icon
Tap the
Wi-Fi icon
Select the
WiOn Outlet
Tap the
WiOn icon
STEP 3: Fill in the information (Note: US
residents enter your five-digit ZIP code,
Canadian residents enter your three-digit
telephone number area code). When
finished filling in the information, click
the SAVE SETTINGS or JOIN button.
(In iOS: if you can't find the JOIN
button, click in the “Password” box).
STEP 1:
STEP 2:
TO ADD ADDITIONAL WiOn OUTLETS TO THE APP: Repeat steps 1-3 for
each additional WiOn Outlet. Remember to give each outlet a different
name (for example, lamp 1, lamp 2, etc.). Note: each controlled device
requires a separate WiOn Outlet.
Wi-Fi™ Status Indicator
Blinking Light: Ready to
connect to Wi-Fi router.
Light continuously ON:
Connection to Wi-Fi router
is complete and the WiOn Outlet
is ready for use via the app.
Light OFF: Check your
internet connection or
review the app FAQ.
NOTE: The closer the WiOn Outlet
is located to the Wi-Fi router during
set-up, the better the signal strength
will be for initial configuration.
TO CONNECT THE WiOn OUTLET TO A WI-FI ROUTER
• With the WiOn Outlet plugged into a power outlet, and the blue light
blinking, plug the controlled device (a lamp, for example) into the WiOn
receptacle. Make sure the controlled device is switched ON.
• If the blue light is blinking you can proceed to the next step to begin the
smart phone setup. If not blinking, you must reset the WiOn Outlet as
described in the FAQ section on the reverse side of this sheet. Note: the
blue light will continue blinking until the setup is finished via the smart-
phone app.
• Once you are finished connecting the WiOn Outlet to a Wi-Fi router, the
blue light will remain on continuously to indicate that Wi-Fi connection
has been established and the WiOn Outlet is accessible via the app.
Choose a Network
Device [ECO-XXXXXXXX] Ver: XXX
Home Router
Other Router A
Other Router B
(such as lamp or fan)
Enter Zip Code:
Name Device:
Enter Wi-Fi Router Password:
DOWNLOAD
THE WiOn APP:
(iOS 7 or higher)
(Version 4 or higher)