Installation Instructions

Table Of Contents

Step1 open the back cover

Characteristic

Step 3.Replace back cover

Abtain the receiver on the mouse

Installing the Batteries

The RF2.4GHz optical mouse use two AAA alkaline batteries.

Installing Batteries in the Mouse

Step2. Insert the batteries as shown inside the battery compartment.

Connecting the Receiver

USB Port

Take out the receiver

Store the receiver

1:when you want use the mouse,you can take out the receiver to computer by the

list step;

2:when you need stop the work or to travel, you can store the receiver on the mouse

for the moving by the list step;

Dimension:100.6*70.8*40mm

Ergonomic design for good hand feeling

2.4G HZ RF transmission: up to 10m

Self-storing nano receiver,easy to take

Resolution:800/1200/1600DPI

High precision optical engine

Compatible with computers of Various system and brands

1.Connect the USB plug only to USB port of the computer

Nano receiver

USB port

Nano receiver

Function

left button

Right Buttor

Idlbt wheel

DPI

power switch

Putting batteries

Putting US B receiver

1.5VAAA

power switch

Putting batteries

Puttin USB reeiver

USB

PAGE 1
Installing the Batteries Abtain the receiver on the mouse The RF2.4GHz optical mouse use two AAA alkaline batteries. Installing Batteries in the Mouse Step1 open the back cover Step2. Insert the batteries as shown inside the battery compartment. Step 3.
PAGE 2
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.