User's Manual

CAUTION:To use this device properly,please read
the user’s guide before installation
Model:BM-693
Instruction Manual
RF2.4GHz Optical Mouse
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on,the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
1.5VAAA
1.5VAAA
Quick Installation Guide :
1. Install battery : Open the battery cover and insert
the battery. BM-693 use 2X AAA Battery
2.Go to the Bluetooth settings on your PC / Mac and turn
Bluetooth on.
3.Turn the power switch to “on”, press and hold the
‘connect button’ on the bottom of the mouse for three
seconds, you will now see the scroll wheel flashing blue.
The mouse is now in pairing mode.
4.Your device will display “bluetooth mouse” select pair
and then your J.Burrows bluetooth mouse will connect
to your device
5.Compatible with Bluetooth enabled Windows and Mac OS.
Connect button