L-TR53B ICONS AND FUNCTIONS 91.03.
A. Remote anti-carjack mode ON/OFF B. Remote control channel # 3 for electrical appliance ON/OFF C. Remote activate temp-controlled auto-start mode ON/OFF D. Remote activate daily auto-start time mode ON/OFF E. Remote engine start (or) changing of run time when the engine gets running F. Remote activate Mute arm mode ON/OFF G. Remote activate Audible arm mode ON/OFF H. Remote shock sensor bypass mode ON/OFF I. Remote activate valet mode ON/OFF J. Remote monitor in-car temperature & status K.
l The numerical signs indicate the vehicle’s security status or other function display 1. Remote’s battery condition 2. Channel # 2 On/OFF 3. Temp-controlled auto-start mode 4. Engine run mode 5. Trunk release 6. Door open 7. Remote unit’s vibration mode 8. Valet mode 9. Auto rearm mode 10. Mute alert mode 11. Audible alert mode 12. Hood open mode 13. Impact/shock mode 14. Hand-brake disengage 15. Door lock mode 16. Door unlock mode 17. Monitor standby mode 18.
L-TR53B User’s manual 2 Way remote security system l Precaution before installation 1. Read this manual carefully ahead of operation. You will find this product very versatile. 2. Park the vehicle in open space each time if the remote any of auto-engine start modes is intended .This avoids you from being suffocated by the exhaust gas while the engine gets running. 3. For safety purpose, set your car to valet mode “ON” before sending it to workshop for serviced 4. There are many other functions .
Operation guide of 2 way remote unit This is devised for easy operation just by some fixed function by buttons and m ovable cursor means . Users can choose the desired function just by first popping out the cursor and then moving it on to the related function Position. There are total 3 buttons marked with 【Ⅰ 、 Ⅱ 、Ⅲ 】on the remote unit. The【Ⅰ 、 Ⅱ 】 buttons are used in alarm function mode setting and the third 【Ⅲ】 button is used in popping out and moving of the cursor on to the desired function position.
※ Self-defined functions by a short press of button 【Ⅱ】 Press and release button【Ⅱ】to activate self-defined function .It is generally programmed to assign 『 』for Mute Arm Mode. other functions can also be programmed as below: Step 1 :Press button【Ⅲ】twice or more times quickly to pop up the cursor. Move the cursor to the desired position by pressing button【Ⅲ】a number times as necessary .
2. Remote disarm & door unlock (a)、Press and release the button【Ⅰ】 or 【Ⅱ】 the system will unlock the door and disarm itself with 2 siren chirps and 2 car light flashes. The dome light will turn on .
Remote control channel # 3 【RF program table 】 (a)、If the system is programmed for channel #3 mode ( an external accessory is required ) (b)、Press quickly 【Ⅲ】twice or more times to pop up cursor and then move it onto 【 】 ). (c)、 Then press and release【Ⅱ】.The system responses in accordance with selected function mode .The parking light flashes 3 times for confirmation.
(c)、The remote start run time can be programmed as required [RF program table]. When the preset run time expires, the engine will automatically shut off.[ The remote unit displays 『r 01』 when the last one min begins its countdown ]. The 『r 00』 displays on the remote unit at the moment of engine shut-off and then disappears. (d)、Remote engine start cannot be done under such abnormal conditions. (1).
7. Remote control temperature-controlled auto-start ON/OFF 【 intended use in frigid countries】 (a)、 Press quickly【Ⅲ】 2 or more times to pop up the cursor and move it onto 【 】. (b)、Then press and release 【Ⅱ】.The siren chirps 3 times with 3 parking light flashes. The engine will start automatically at pre-selected temperature and begin running and automatically shut off when the pre-set run time expires.
9. Remote monitor temperature/status check (a)、Press quickly 【 Ⅲ 】2 or more times to pop up the cursor and then move it onto 【 】 (b)、Press and release【Ⅱ】to monitor in-car temperature and the status of the car. Parking light flashes 3 times. l The remote unit displays on its screen the in-car temperature with car’s security status and will sound melody. For example, the 『 』on the LCD describes the interior temperature of the car is at 23 degree centigrade.
. Remote Active channel # 2 (for example use of headlight auto turn-on ) (a)、This function can be for remotely controlled regardless of the main system in arm or disarm modes. ( an additional accessory is required and can be programmed for any desired remote control function ). For example:to turn headlight ON for 30 sec by remote unit and automatically turns off. (2)、Press quickly【Ⅲ】2 or more times to pop up the cursor and move it on to【 】 (3)、Then press and release 【Ⅱ】.
l The remote unit displays 『 』on its screen with one long beep alert. (b)、If the heavier impact is detected by the main system, the second stage alert is triggered .The siren blurts and the parking light flashes for 15 sec duration.. l The remote displays『 』with beep alert for 15 sec. (c)、If the system is triggered by other means like ( door-pen、 trunk、hood-open or ignition “ON” during arm mode) , the siren blurts and the parking light flashes for 30 sec and the engine start circuit is killed.
1 7 . Switch-controlled anti- carjack ON/OFF (a)、While the engine is running ; press the anti-carjack to activate this function switch .The activated anti-carjack mode undergoes 2 stages as below: (1) In the 1st stage; the parking light flashes for 30 sec.
20. Programmable functions by over-ride switch The L-TR53B model’s functions 【valet, daily auto-start time ,temperature-controlled auto start 】can be programmed for ON/OFF modes by means of over-ride switch in the following procedure. (a)、Turn the ignition OFF (b)、Press and release the over-ride switch for assigned number of times to acquire desired mode settings [ 3 times for valet change mode setting ],[ 4 times for daily auto-start time setting],[5 times for temperature-controlled auto-start setting].
Manual Disarm Mode (a) Turn the ignition key to ON position. (But engine must not be running) (b) Press and release the over-ride switch 4 times (c) Turn the ignition key to OFF position {siren chirps 2 times with 2 flashes of parking light}. The system will enter Disarm mode. Note:(a)Under manual Arm mode; if the system is triggered, the system will enter initial alert mode ( siren chirps 3 times with 3 parking light flashes). 20 sec later , the system enters Alarm and Warn Away Mode.
24. System status-indicator L E D Fix the LED status indicator at the appropriate location inside the car to allow maximum visibility of it.
25.
The Wintercronics Co., Ltd. Model: L-TR53B (referred to as the EUT in this report) is a Transceiver of car alarm security system. It offers wireless remote control, ideal for use in vehicle security system to activate the function of center door lock control system and car searching except the alarm system. A major technical descriptions of EUT is described as following: A). Fundamental Frequency: 433.92 MHz B). Modulation : Pulse Modulation C). Antenna Designation: Non-User Replaceable (Fixed) D).
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition.(1).this device may not cause harmful interference. (2).this device must accept any interference received, including interference that may cause undesired operation Warning: Note: This equipment has been tested and found to comply with the limits for digital device, pursuant to Part 15 of FCC Rules.