COMPACT MODEL ~120 Each on the monitor represents the Following User's voice being transmitted transceiver detects {transmission, Strong/weak \transmission being sent/received BAT Low... Warning for batteries replacement SCAN. User's transceiver in auto-scant mode LOCK. All function settings in lock mode CH. _ Current channel no.
» POWER ON/OFF . UP/DOWN buttonwood level . Channel setting. . Auto Scanning... . Squelch setting; . Beeper On/Off setting... . PTT button/ How to communicate... . Battery Low Warning... . ‘Trouble shooting... . Warnings. . Channels Vs frequencies chart... CONTENTS PAGE MINI buiton/Scund level checking... .. 01 . LAMP hut tow display backing 61 . FUNCTION/LOCK button 01 Junction changing Specifications...
HOW TQ USE BUTTONS AND KEY POWER ON/OFF bunion (srl color button): Press and hold the small red button for about 2 seconds to switch the transceiver ON To tum OFF, press and hold for about another 2 seconds . UP AND DOWN BUTTONS: Under the power ON condition before pressing the function button , one press of any such buttons makes the monitor show the sound level status. Press up A or down x7 bunion to readjust the sound level up/ downwards as required. Sound level ranges [~15.
Auto Scanning ‘In the above Chan! setting process, a longer press down {7 button will start the auto-scanning. The scan ” word will show on the monitor. Auto-scanning will stop at the channel when any transmission on this channel is™detected. The detested channel is fixed for a few seconds before the transceiver will keep on continuous scanning . To bypass it, press the function or PTT button first | then press A up or down ¥7 button to locate a new higher/lower channel.
how weak/strong your voice is being transmitted while the PTT button is pressed (This phenomenon can be used as a reference for your batteries condition .) When the PTT is not pressed, the dotted lines will show up when the transceiver detects any trace of transmission (The stronger the transmission it detects , the more dots appear on the monitor.) TROUBLE SHOOTING: a) If you are unable to transmit even pressing the PTT; 1) cheek if the batteries are weak.
COMPACT MODEL-120 TECHNICAL SPECIFICATIONS GENERAL “ Antenna impedance Sound Sound speak Microphone... Power supply. RECEIVER Sensitivity at 12dB Sinbad Selectivity... Squelch range... Audio frequency response. L400 ~ 3000 Hz TRANSMITTER RF Output Power... nominal 500 Frequency Torrance. cocoons nines 0.00025% Harmonic Suppression. ..mare than 50 dB Modulation FM 2.5 Khz CHANNEL NUMBERS VS FREQUENCIES Channel No, Prong MHz Channel No. | Freq MHz __ 462.5625 8 467.5625 462.5875 9 467.5875 462.6125 0 467.