Assembly Instructions Caution: You must read this before you proceed Loveseat Part List Label Picture Description QTY A Seat Base 1 B Backrest 1 C Seat Cushion 2 Page 1 OF 13
D Left Back Cushion 1 E Right Back Cushion 1 F Left Arm 1 G Right Arm 1 H Front Seat Board 1 I Back Seat Board 1 J Wood Leg (with Gasket) 4 Page 2 OF 13
Middle Leg (with Gasket) 1 Description QTY ① Gasket 3 ② Allen Key 1 K Hardware Label Picture Assembly Preparation Before Begining Assembly: Page 3 OF 13
Assembly Steps Overview Right Back Cushion(E) Left Back Cushion (D) Backrest (B) Right Arm (G) Seat Cushion (C) Front Seat Board (H) Left Arm (F) FRONT FACING Wood Leg (J) This Loveseat has multiple parts and may require about 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 C A C B F E D H G I Small Bubble Package Take the Seat Base(A), Backrest(B), Seat Cushions(C), Left Back Cushion(D), Right Back Cushion(E), Left Arm(F), Right Arm(G), Front Seat Board(H), Back Seat Board(I) and Small Bubble Package out of the carton and place them on a clean, non-marring surface. Step 2 J K ① ② Small Bubble Package Open the Small Bubble Package to take out the Wood Legs(J), Middle Leg Gasket(K), Gaskets(①) and Allen Key(②).
Step 3 J ① F G G F Turn the Left Arm(F) and Right Arm(G) facedown as pictured. Install the Wood Legs(J) at the bottom of the Left Arm(F) and Right Arm(G). Insert threaded stem into the mounting positions at the bottom of Left Arm(F) and Right Arm(G). Tighten by turning the Leg clockwise. Note:The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbles. Some Legs may need more than one gasket whilst some Legs may not need any.
Step 4 F F I ② I I F G With assistance from your adult partner, postion the Left Arm(F) and Right Arm(G) as pictured, align the Back Seat Board(I) between both Arms. Then place the hooks on the ends of the Back Seat Board(I) onto the two raised Bolts on the Left Arm(F) and Right Arm(G) and tighten with Allen Key(②). Note: The Bolts on the arms shouldn't be removed but may need to be loosened to fit the hooks.
Step 4 G G ② H H H G F I Repeat the same process from Step 3, to assemble the Front Seat Board(H).
Step 5 K ① K A Install the Middle Leg(K) at the bottom of the Seat Base(A). Insert threaded stem into the mounting position at the bottom of the Seat Base(A), tighten by turning the Leg clockwise. Note: The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbles. Some Legs may need more than one gasket whilst some Legs may not need any.
Step 6 A G F H I With assistance from your adult partner, hold up the Seat Base(A) and align it to the Loveseat Base. Intersect the Mounting Brackets on the Seat Base(A) with those on the Left Arm(F) and Right Arm(G), then push firmly down on the Seat Base(A) until it locks into position.
Step 7 B G B G F H With assistance from your adult partner, hold up the Backrest(B), while standing behind the Loveseat Base. Align the mounting brackets on both sides of the Backrest(B) with those on the Left Arm(F) and Right Arm(G). Then slide Backrest(B) downward to make sure it locks into place as pictured. Step 8 C B G F A H Put the two Seat Cushions(C) on the Seat Base(A).
Step 9 E D B Place Left Back Cushion(D) and Right Back Cushion(E) on Backrest(B). Your Loveseat is ready for use. This Loveseat can only be used on a flat, level surface.
Page 13 OF 13
