Assembly Instructions Caution: You must read this before you proceed Dining Chair Parts List Label Picture Description QTY A Left Armrest 1 B Right Armrest 1 C Seat 1 Page 1 OF 6
D Backrest 1 E Seat Cushion 1 Description QTY ① Bolt (M6*35MM) 10 ② Washer 10 ③ Allen Key 1 Hardware Label Picture Assembly Preparation Before Beginning Assembly: Page 2 OF 6
Assembly Steps Overview This Dining Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Dining Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 If the Dowel does not match the mounting position, please loosen the Dowel by 3-5MM.
Open the carton and place all the parts onto a clean, non-marring surface. 1.1 Insert the Dowel on the Backrest(D) into the mounting position of the Left Armrest(A). 1.2 Attach Backrest(D) to Left Armrest(A) using Bolts(①) and Washers(②) with Allen Key(③) as shown in the picture. Do not fully tighten the Bolts. Occasionally some of the PE Wicker shifts and covers the mounting positions preventing easy assembly. The PE Wicker should never be cut, but moved away from the mounting positions.
Align Right Armrest(B) to Backrest(D) and Seat(C). 3.1 Insert the Dowel on the Backrest(D) into the mounting position of the Right Armrest(B). 3.2 Attach Right Armrest(B) to Backrest(D) and Seat(C) using Bolts(①) and Washers(②) with Allen Key(③) as shown in the picture. Stand the Chair up. Exert pressure floorwards, onto the Chair with both your hands. This pressure will help the Chair reach full alignments status. Check for wobbles on a LEVEL surface.
Page 6 OF 6
