Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some Allen Wrench included) 0 products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES When Jock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the larger phial washer and the head of the screw or bolt Some furniture comes with height adjustment knobs underneath each leg.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
Align legs to stretchers (#4) and seat then secures legs ta seat (#1) by using bolts ($A) with washers #A x PCs #D x apes #E x PCs Secure stretchers (#4) to legs (#23) by using screws #C x PCs Page 50of 7
1) Align stretcher (#10) to legs then insert barrel nuts (#F) 10 the holes of the stretcher Secure by tightening bolts (#B) to barrel nuts apes #B x PCs #D x dps #E x PCs #F x PCs Align legs to table top then secure by using bolts (#A) with washers Align legs to the table (#5) and stretcher then secure legs to table (#5) by using bolts (#A) with washers #A x PCs #D x PCs #E x apes Page 6 of 7
Secure stretchers (#11) to legs by using screws (#C) 0 Q QoQ ASSEMBLY IS COMPLETED Page 7 of 7