Wire le ss N U SB Ada pt e r 1 5 0 M bps H i-Ga in WS-WN 6 2 2 H N 1 ,U 1 2 -4 3 8 7 1
I nt roduc t ion Thank you for purchasing the Wireless USB Adapter, Wireless USB Adapter allows you to connect your laptop or desktop to any Wireless networks in your home or office. The Wireless USB Adapter is great for those who want to upgrade older computers to be able to access the internet over a Wireless network.
I nst a lla t ion IMPORTANT: For proper operation, do not connect the Wireless USB Adapter to your computer before you install the software. If you do, wait for the Found New Hardware screen to display and click “Cancel”; otherwise, the installation process will likely be adversely affected. Insert the included setup CD in the CD-ROM Drive and start the Setup.exe program. To start the installation, please click on the “USB 802.11N Adapter” or “USB 802.
If you prefer to use the tool provided by Windows XP/Vista, select “Microsoft Zero Configuration Tool.” Choose either (the setting can be changed after the install), then click “Next.” The installer will automatically install the program. When done Select Yes.
With the Welcome to the Found New Hardware Wizard screen displayed (which is automatic when the adapter is connected to the .computer), select the option “No, not this time” and click “Next.” When prompted with “What do you want the wizard to do?” select “Install the software automatically (Recommended)” and click “Next.” A status screen will display, indicating that the installation is in progress. No action is needed at this point.
Configura t ion Once the installation is complete, you can configure the Wireless Adapter to connect to a wireless access point (AP). The wireless configuration utility will start automatically, and you’ll also find a tray icon at the lower right in your Windows systems tray. Right-click on the Ralink icon corner of your screen. in the task bar in the bottom right hand Lets you change the operation mode of the Utility.
Accessing the Utility's Features The Ralink Utility lets you connect to a wireless network and the Internet, set up a wireless network, connect directly to other computers or devices using Wi-Fi Direct, and many more wireless-related features. From the main screen, you can access the main features of the Utility (A), and find out about the status of your current network connection (B and C).
B Use these buttons and icons to manage transmission and to find information about your wireless connection. Click this button to enable or disable wireless transmission. Indicates the security status of your connection. Indicates the quality of your wireless connection. C Use this screen to find information on wireless network settings. � � � � � SSID: This shows the name of your wireless network. Rate: This shows the speed of your connection. Channel: This is the channel assigned to your connection.
FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
