Quick Guide

Hardware Overview
3
LED Indicators
Wi-Fi Signal Strength
POWER
WAN/LAN
WPS
ON: The Extender is powered on.
OFF: The Extender is not receiving electrical power.
ON: The Ethernet port is connected.
OFF: The Ethernet port is disconnected.
Flashing: Transferring data to/from connected devices.
Slow Flashing: The Extender is trying to connect to your phone or PC.
Fast Flashing: The Extender is connecting to your AP or router.
WPS Button:
Press and hold for 2 seconds, the Extender is trying to connect to your phone or PC .
Press and hold for 6 seconds to connect to your Wi-Fi AP/router (for Repeater Mode).
Reset Button: Press and hold for 3 seconds to Reset the Extender.
Mode
AP/Router
Repeater
Indicator LEDs
ON
ON
ON
ON
ON
OFF OFF
OFF OFF
OFF
ON
ON
ON
ON
Flashing
Description
Full Reception: 100%
Full Reception: 100%
Good Reception: 50% to 75%
Weak Reception: below 50%
Disconnected
1. Launch a web browser and enter ap.setup
in the address field. Enter admin (all lowercase)
for the first login.
3. Click Wizard. Select a Wi-Fi SSID of your router (Host WIFI)
and enter the password. Either keep the same SSIDs as your
host WIFI or create new names for the extended networks.
Verify your wireless settings and click Connect button.
※Please DO NOT install the Extender in where it is heavily surrounded
by things. And KEEP AWAY from the strong electromagnetic radiation.
- Drawings with “ ” : Recommended - Drawings with “ X ” : Not Recommended
2. The “System Setup” window will pop up for the
first login. Configure and change the default
login password, then click Next.
Getting Started
OPTION ONE
Wi-Fi Repeater Mode
Using a Web Browser
The Extender also supports Router and AP modes. And you could switch the mode selector to choose the mode you prefer.
Quick Guide
Wi-Fi Range Extender
Router Mode and Access Point Mode (Optional)
Power ON
1
1.
Switch the mode selector to Repeater position.
2. Plug the product into an electrical outlet near your
Wi-Fi router.
3. Shift the power switch to ON and wait until the
POWER LED is on and solid green.
If the login window does not pop up, please
refer to the FAQ > Q1.
For Windows User
1. Disconnect the Ethernet (Wired) connection
from your laptop (if any).
2. Turn your laptop’s Wi-Fi ON if it is OFF.
3. Click the Wi-Fi icon on the top right corner
of the screen, and connect to the Extender’s
network: Wirelees-N or Wirelees-AC.
For Mac OS X User
Connect to the Device
2
Configure
3
1.
Disconnect the Ethernet (Wired) connection
from your laptop (if any).
2. Turn your laptop’s Wi-Fi ON if it is OFF.
3. Click the Wi-Fi icon on the taskbar and connect
to the Extender’s network:
Wirelees-N or Wirelees-AC.
Relocate
4
1. Plug the Extender into an electrical outlet about halfway between your router(Host Wi-Fi) and the Wi-Fi dead zone. The location you
choose must be within the range of your existing host Wi-Fi.
2. Wait until the WLAN LEDs are ON. If the signal is weak, relocate it closer to your router to achieve a good (or better) signal quality.
Tips:
1). Use your phone to find the ideal location for
the Extender. If your phone’s Wi-Fi signal
(received from your router) is higher than 3
levels, it is the ideal spot to install the Extender.
If not, we recommend you move it closer to
your router for better Wi-Fi signal.
2). If you haven’t changed the names of extended
2.4G and 5G at Step 3, the default extended
2.4G SSID (Wi-Fi name) will be your router’s
SSID with “EXT2.4G” within and “EXT5G” is for
Extended 5G SSID correspondingly.
3). The extended 2.4G&5G passwords are the
same as your Host passwords.
Default Parameters
Login: http://ap.setup
Default IP: 192.168.10.1
Login Password: admin
2.4G SSID: Wirelees-N
5G/AC SSID: Wirelees-AC
Not connected
Connections are available
Wireless Network Connection
Wirelees-N
Wirelees-AC
Connect
Connect automatically
Wi-Fi:On
Turn Wi-Fi Off
Wirelees-N
Wirelees-AC
Join Other Network....
Create Network....
Open Network Preferences...
Host Wi-Fi
WLAN WLAN
Ideal Location
WLAN WLAN
Flashing
Too Far Away
Swtich to Repeater Mode
Signal Strength
Indicator LEDs
Wi-Fi Range Extender
English
login
Repeater Wizard
Status Wizard Wi-Fi Setup
Connect
Wi-Fi Connect to:
Wi-Fi Password:
Extended 2.4G:
Repeater Mode:
Gateway(recommended)
Extended 5G:
Select a Wi-Fi Manually
Your Host Wi-Fi Name
Wireless-562
Wireless-N
Wireless-112
Your Host Wi-Fi Name
Extended 2.4G Wi-Fi Name
Extended 5G Wi-Fi Name
Host Wi-Fi Password
System Setup
Login Password:
Next
Country Region:
Time Zone:
Country Region
Time Zone
Note: The default password of the Extender is
“admin”, we strongly recommend you change
the default password.
AP Mode
Router
Ethernet Cable
Router Mode
Modem
Ethernet Cable