User's Manual

User Manual

1.1 Battery Installation

.Open the battery cover of mouse.

.Put battery in according to the polarity of the battery, then close the cover.

2.2 Device connection

⑴. Open the bluetooth device of computer.

⑵. Turn on the power supply switch ,holding the CONNECT key for 2 seconds, then the mouse will be in

matching state.

(3). select "Add"in the Bluetooth message box,Refer to below screenshot indicated .

(4). Mark a "√" in the windown message box ,then click"next"to search.

(5). Bluetooth mouse is on the screen ,select "Device"and then click "next"to match.

(6). Select "Non-password"while in matching state after then function is activated .The code will not be replaced

while computer is power off or while batteries are installed.

3.3. Sleeping mode

Press any button to wake-up from Sleeping mode

PAGE 1
User Manual 1.1 Battery Installation .Open the battery cover of mouse. .Put battery in according to the polarity of the battery, then close the cover. 2.2 Device connection ⑴. Open the bluetooth device of computer. ⑵. Turn on the power supply switch ,holding the CONNECT key for 2 seconds, then the mouse will be in matching state. (3). select "Add"in the Bluetooth message box,Refer to below screenshot indicated . (4). Mark a "√" in the windown message box ,then click"next"to search. (5).
PAGE 2
4.4 Matters needing attention: ⑴.Applications of the mouse will be affected on the rough or reflection surface. ⑵.Don’t disassemble mouse ⑶.Use dry and soft cotton product clean mouse. ⑷.Careful choice battery. its quality affects operation time and mouse life. Instructions on “wireless” Transmission frequency is 2.4GHz,it meet R&TTE Directive 1999/5/EC noun in Europe and its radiation does not harm human body .