Installation Guide

ManualsBrandsWinpro ManualsFarmhouse Kitchen SinksFarmhouse Apron Front Fireclay 36 in. x 18 in. x 10 in. Plain Single Bowl Kitchen Sink with Center Drain in White

Winpro® Fireclay Sinks

Read Instructions Before You Begin

• It is highly recommended that professional or experienced installer manage the countertop

cutting and installation of the product. This installation is designed for an advanced skill level.

• Please discuss with your installation professional your desired installation preference (Under

mount, Flushmount, Reveal). Typical installations utilize the undermount installation.

• Typical installations utilize the undermount installation with either a 1/4” exposed or 1/8”

overhang

Overhang Exposed

• No cut out template is provided with this product due to the slight dimensional variation

inherent in the fireclay manufacturing process. The actual sink should be used as the template

for cutting the countertop and cabinets by a professional or experienced installer. Some models

have reversible aprons, ensure your installer understands which face of the sink will be revealed

before cutting countertop. The manufacturer is not responsible for countertop or sink damage

during the installation process.

• Please inspect your sink for any damage prior to the installation process

• Fireclay sinks should only be installed with granite, quartz, or solid surface countertops

• Your professional or experienced installer will need to build support frames inside your cabinet

to support the weight of the sink (full sink, with water and dishes, could weigh up to 300 Lbs.)

All installations need proper room for faucets, piping, and other potential accessories. There are

many different ways to build the support: metal strapping, wood braces, or a plywood platform.

Consult with the installer for the best option.

Summary of content (5 pages)

PAGE 1
Winpro® Fireclay Sinks Read Instructions Before You Begin • • • It is highly recommended that professional or experienced installer manage the countertop cutting and installation of the product. This installation is designed for an advanced skill level. Please discuss with your installation professional your desired installation preference (Under mount, Flushmount, Reveal). Typical installations utilize the undermount installation.
PAGE 2
1. Measure the location for your kitchen sink and cut the cabinet for proper fit. You will need to ensure your measurements take into account the countertop which is placed over the sink and cabinets as the last step. Note: • For a 33” wide sink you need a minimum of a 36” cabinet • For a 30” wide sink you need a minimum of a 33” cabinet • For a 24” wide sink you need a minimum of a 27” cabinet 2. Fasten 2 X 4’s to both interior sides of the cabinet using wood screws.
PAGE 3
. Option 1: Cut a ¾” piece of plywood that will serve as the deck for the sink to rest on. Note: Make sure you cut holes in the plywood for access to water lines, drain, garbage disposal, etc. Secure plywood panel to the wood studs fastened to the side of the cabinet in step 2 using wood glue and wood screws. Option 2: Attach 2 X 4’s to the wood studs fastened to the cabinet sides in step 2 using wood glue and wood screws. 4.
PAGE 4
5. Apply a bead of silicone sealer to the top of the sink rim and cabinet. 6. Place the countertop on top of the cabinets. Ensure it is level. 7. Wipe off any excess silicone before it dries.
PAGE 5
Care and Cleaning • To maintain the appearance of this product, we recommend it should be cleaned using a soft cloth and a non-abrasive cleaning product, a simple solution of warm water and a mild liquid detergent will suffice. Ensure that the product is rinsed thoroughly and wiped dry. NOTE: • • Never use any form of abrasive cleaner or abrasive applicator as they can scratch the surface. Any other cleaning action will invalidate your warranty.