Operating Instructions Basic Guide Wireless Presentation System Receiver Board For business use Model No. TY-SB01WP * PressIT is a nickname for “Wireless Presentation System”. Thank you for purchasing the Panasonic product. •• Please read these instructions before operating this product and retain them for future reference. •• Be sure to read “Safety Precautions ” (page 2) before use.
Safety Precautions WARNING: When mounting or removing this product on or from the flat panel display unit, be sure to turn the power off, and remove the power plug from the socket. Otherwise, electric shock may occur. Never attempt to disassemble or modify this product. Doing so may cause fire, electric shock or operation errors. If you sense smoke, unpleasant odour or unusual noises, immediately disconnect the power plug from the socket.
Precautions for use This product is a Wireless Presentation System Receiver Board used by being attached to a Panasonic display. Do not touch this product directly by hand. •• Static electricity may occur, destroying the components. Static electricity is also generated from clothing or human body. Let the static electricity escape by touching metallic objects such as a steel cabinet beforehand. Details of usage For details of usage, read “Operating Instructions Functional Manual”.
Part Names 1 Antenna 1 ▼ Connection terminals / Controls 2 FUNCTION button Used to save a pairing file to the USB memory. terminal (RJ45) 3 LAN Connects to the network to change the settings of the product. 4 USB terminal (Type-A) Connects the transmitter or USB memory when pairing devices. Use this by connecting an HID device (mouse, touch module). 5 FUNCTION LED Displays the pairing status.
Installtion of the receiver board The installation instruction below is based on the flat panel display SQ1 series as an example. For attaching or removing this product to or from the flat panel display unit, it is recommended to ask a qualified technician or sales dealer. A malfunction may occur due to static electricity, etc. Consult the sales dealer. Follow the steps below.
Basic Use Receiver board 1 2 3 4 Turn on the display. Switch the input of the display to [SLOT]. Pair the receiver board and the transmitter. (when connecting for the first time, see page 8) When the standby screen appears on the display, preparation of the receiver board is complete. Transmitter 1 Connect the USB terminal and HDMI input terminal of the transmitter to the image output device. •• For power supply to the transmitter, 5 V/0.9 A power supply is necessary.
2 Main LED changes from red blinking (connecting) to white illumination (standby). Red blinking (connecting) 3 Pressing the main button again changes the main LED to white and returns to standby state. (The screen returns to the standby screen as well.) •• When using multiple transmitters, the image is switched to the image of the transmitter of which the main button is pressed. White illumination (standby) Press the main button of the transmitter. The image is displayed.
Transmitter Extension Method (Pairing) Pairing by connecting the receiver board and transmitter 1 Slide the mode switch to the STD side. 3 2 Connect the USB terminal of the transmitter to the USB terminal of the receiver board. Wait for a while until the FUNCTION LED of the receiver board blinks in white. Then, pairing starts automatically. “Pairing…” (pairing in progress) is displayed on the standby screen. Pairing is complete.
Pairing by saving a file to the USB memory Supported device ●●Commercially available USB memory devices are supported. (Those with security functions are not supported.) ●●USB memory devices other than those formatted in FAT16 or FAT32 cannot be used. ●●Up to 32 GB of USB memory in size are supported. ●●Only single partition configuration is supported. 1 4 5 Connect the USB memory to the USB terminal of the receiver board. Slide the mode switch to the EXT side. Supply power to the transmitter.
Setting [Setup] menu (display setting) When this product is connected to the compatible display and the [Setup] menu is set, the following functions can be used. This section explains each setting using the display SQ1 series as an example. For settings on other models, see the Panasonic information site. Panasonic display link function Just connect the receiver board to a Panasonic display supporting this product and turn them on to perform the link operation.
●●Wireless presentation link Sets the link of the Display with this product. [Off]: Does not link with this product. [On]: Links with this product. Note •• When this receiver board is connected to the SLOT, the link function works. •• The following functions are fixed. These settings are held even if this function is switched from [On] to [Off]. The settings can be changed on each setting menu. ••[Picture mode] is fixed to [Graphic]. ••[HDMI-CEC control] is fixed to [Enable].
Setting Continued ●●[Date/Time setting] Specifies the display style of date on the standby screen. [Y-M-D]: [Y/M/D]: [Y.M.D]: [D-M-Y]: [D/M/Y]: [D.M.Y]: [M-D-Y]: [M/D/Y]: [M.D.Y]: [M D,Y]: [Off]: e.g. 2021-08-24 e.g. 2021/08/24 e.g. 2021.08.24 e.g. 24-08-2021 e.g. 24/08/2021 e.g. 24.08.2021 e.g. 08-24-2021 e.g. 08/24/2021 e.g. 08.24.2021 e.g. 08 24,2021 Date is not displayed on the standby screen. Note •• When this is set to [Off], the setting is applied at the next startup of this system.
●●[HDMI-CEC control] Enables/Disables the HDMI-CEC function. [Disable]: Disables HDMI-CEC control. [Enable]: Enables HDMI-CEC control. Note •• Enables/Disables the Display to perform interlocking control of the HDMI-CEC compatible device. ●●[SLOT] [PressIT] is displayed. ●●[MENU code] No code is assigned to this system. ●●[Display → Device] Enables/Disables the Display to perform interlocking control of the HDMI-CEC compatible device.
Setting Continued ■■SLOT settings Set for SLOT. [SLOT settings] - submenu screen SLOT settings SLOT information SLOT power link Off SLOT standby On SLOT power on SLOT forced termination ●●[SLOT standby] Sets the power supply status for the SLOT when the unit is in standby mode. [Off]: The power is not supplied to the SLOT when the power is turned off by the remote control, etc. [On]: The power is supplied to the SLOT when the power is turned off by the remote control, etc.
Notes on Using Wireless LAN Wireless LAN uses radio waves in the 5 GHz bands. Be sure to read and fully understand the following items before use. Use this product indoors. ●●Using the 5 GHz-band wireless device outdoors is prohibited by the Radio Act. If at all possible, avoid the use of cellular phones, TV sets or radios near the product.
Notes on Using Wireless LAN Continued Declaration of Conformity (DoC) “Hereby, Panasonic Corporation declares that this product is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/ EU.” If you want to get a copy of the original DoC of this product, please visit the following website: http://www.ptc.panasonic.
Request Regarding Security When using this product, take safety measures against the following incidents. ●●Personal information being leaked via this product ●●Unauthorized operation of this product by a malicious third party ●●Interfering or stopping of this product by a malicious third party Take sufficient security measures.
Request Regarding Security Continued Depending on the specifications of the wireless LAN, a malicious third-party may be able to break security settings by special means. Please contact Panasonic if you need help taking care of security settings or other such. If you cannot perform security settings for your wireless LAN by yourself, please contact the Panasonic Support Center.
Specifications Model No. Product name TY-SB01WP Wireless Presentation System Receiver Board Video output HDMI × 1 (HDCP1.4) Output resolution 1920 x 1080/60p, 3840 x 2160/30p (max.) Number of simultaneous connections 32 Wireless communication standard IEEE802.11a/n/ac Bluetooth (GFSK, π/4-DQPSK, 8DPSK) Data rate wireless 867 Mbps (max.) Frequency band 5 GHz (5.150 GHz to 5.
Software License This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0), (4) the software licensed under the GNU LIBRARY General Public License, Version 2.0 (LGPL V2.0), (5) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C&E has been investigated. It is applicable to the modular. 2.3 Specific operational use conditions This module is stand-alone modular.
Panasonic System Solutions Company of North America Division of Panasonic Corporation of North America Two Riverfront Plaza Newark, NJ 07102 PANASONIC PROFESSIONAL DISPLAY Limited Warranty Panasonic System Solutions Company of North America (referred to as “the Panasonic ”) will repair the Professional Video product (the “Product”) and its accessories as defined All Professional Display 3 Years in the attached table, with new or refurbished parts, free of Model charge in the continental USA, during the ap
Panasonic will also not be responsible for any costs associated with determining the source of system problems or for removing and installing the faulty Product. This warranty is extended only to the original purchaser and is nontransferable. A purchase receipt or other proof of date of original purchase will be required before warranty service is rendered.
Trademark Credits •• HDMI, High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. •• USB Type-C and USB-C are trademarks or registered trademarks of USB Implementers Forum. •• PressIT is a trademark of Panasonic Corporation. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
Customer’s Record The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.