M101P-BH Rugged Windows Tablet Intel® Apollo Lake Pentium N4200 Windows 10 IoT Enterprise User Guide Version 1.2 Please read these instructions carefully before using this product, and save this manual for future use.
M101P Rugged Tablet User Guide Contents CHAPTER 1: READ ME FIRST...................................................................................................................................... 4 1.1 ADVISORY CONVENTIONS 4 1.2 SAFETY INFORMATION 5 1.3 HANDLING AND MAINTENANCE 7 1.4 DECLARATION OF CONFORMITY (DOC) 8 CHAPTER 2: GETTING STARTED ................................................................................................................................. 9 2.1 INTRODUCTION 9 2.
Contents 5.7.3 Perform Bluetooth Pairing ....................................................................................................................................... 62 CHAPTER 6: TROUBLESHOOTING ............................................................................................................................ 64 6.1 BASIC TROUBLESHOOTING 64 APPENDIX ...........................................................................................................................................
M101P Rugged Tablet User Guide Chapter 1: Read Me First 1.1 Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. Note: A note is used to emphasize helpful information Important: An important note indicates information that is important for you to know.
Chapter 1: Read Me First 1.2 Safety Information Precaution on Battery Pack Précaution avec le bloc-pile Do Not Disassemble, Modify, or Insert Sharp Objects Into the Battery Pack. Electrolyte leakage, generation of heat, ignition or rupture may result. [FR] Ne pas démonter, modifier, ou insérer des objets pointus à l'intérieur du bloc-pile. Une fuite d'électrolyte, la génération de chaleur, l'amorçage ou la rupture peuvent être occasionnés.
Rugged Windows Tablet M101P General Product Safety Sécurité générale des produits Do not block any ventilation openings. Do not place the product against a wall or in an enclosed space as doing so might impede the flow of cooling air. [FR] Ne pas bloquer les ouvertures de ventilation. Ne pas placer le produit contre un mur ou dans un espace clos de façon à entraver la circulation de l'air de refroidissement.
Chapter 1: Read Me First 1.3 Handling and Maintenance General Guideline Guide Général Keep the product at least 13 cm (5 inches) away from electrical appliances that can generate a strong magnetic field such as TV, refrigerator, motor, or a large audio speaker. [FR] Garder le produit au moins à 13 cm (5 pouces) de distance des appareils électriques qui peuvent générer un fort champ magnétique comme une télévision, un réfrigérateur, un moteur, ou un important haut-parleur.
M101P Rugged Tablet User Guide 1.4 Declaration of Conformity (DoC) FCC Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a class "B" digital device, pursuant to part 15 of the FCC rules.
Chapter 2: Getting Started Chapter 2: Getting Started This chapter tells you step by step how to get the Tablet Computer up and running. 2.1 Introduction Thank you for purchasing 10.1-inch Rugged Windows Tablet Computer M101P. The M101P is a rugged tablet PC with robust set of features designed to withstand industrial use while providing high tech solutions that increase productivity, improve safety, and reduce operational costs.
Rugged Windows Tablet M101P 2.2 Unpacking Check and identify the standard supplied accessories. Check and identify the supplied accessories: Tablet Computer Standard Battery Part No. 98K000A0003T Power Adapter Part No. 922D065W19V1 Power Cord and Plugs Part No. 922D065W19V1 Capacitive Stylus Part No. 9B0000000415 Quick Start Guide & Driver CD Your package may include other optional accessories based on your order: Desk Dock Part No.
Chapter 2: Getting Started 2.3 Description of Parts Dimensions: 271.9 x 198.3 x 19.5 mm (10.7 x 7.76 x 0.77 inches) Front: Left: No Item Digital Mic with noise cancellation Description Display and act as one of the inputs for the Tablet Computer Use during video recordings and communications. 1 10.1” Touch Screen 3 Front Camera 2 Megapixel Webcam 4 Light Sensor and LED Indicators 5 I/O Cover 6 Fn1 Button 2 7 Menu Button Show the current status of the Tablet Computer.
Rugged Windows Tablet M101P Rear: Top: Bottom: No 16 17 Item Optional RFID Reader Optional Extension Port 18 Camera Flash 19 Rear Camera 20 Battery Release Slider Touch Pen Slot Battery Lock Latch 21 22 23 24 Speakers 3G / LTE Module / SIM card slot 25 Fn2 Button 26 Brightness or Volume Buttons 27 Battery Description RFID Reader for reading RFID tags. Provides connectivity to custom modules for special applications (USB2.0 x 1, RS232 x 1).
Chapter 2: Getting Started 2.4 Hotkey for Specific Functions For the physical buttons on the tablet computer, in addition to its dedicated functions detailed in the previous section, it can also be used to emulate commonly used keyboard key strokes.
Rugged Windows Tablet M101P 2.5.1 Installing SIM Card (For 3G/LTE Equipped Devices) The Tablet Computer supports 3G/LTE data connection and fits a Micro-SIM card. To install the SIM card: Tools Needed: Service Windows Screw: M2x5, 4 pc Screwdriver: Philips Type , Size #0 , for M2 screws, torque: 2.0 ± 0.5 kgf.cm 3G/ LTE Module Screw: M2x3.5, 1 pc Screwdriver: Philips Type , Size #0 , for M2 screws, torque: 2.0 ± 0.5 kgf.cm ❶ Remove four screws and remove the service window.
Chapter 2: Getting Started 2.5.2 Installing a Micro SD Card Your tablet supports additional storage with an optional microSDXC card slot. To install Micro SD Card: 1. Open I/O protective cover by pulling out the latch. 2. Insert microSD card into slot with contacts facing down. 3. Press the card in to ensure that it is seated properly. 4. Close I/O protective cover. To remove Micro SD Card: 1. Open I/O protective cover by pulling out the latch. 2. Push and release the micro SD card to unlock it. 3.
Rugged Windows Tablet M101P 2.5.4 Charging Your Tablet The Tablet operates either on external AC power or internal battery power. It is recommended to use AC power when you start up the Tablet for the first time. Caution: Use only the AC adapter included with your Tablet Computer. Using other AC adapters may damage the Tablet Computer and the Battery. To connect a tablet to AC power: 1. Open I/O protective cover by pulling out the latch. 2.
Chapter 3: Setting Up Windows for the First Time Chapter 3: Setting Up Windows for the First Time This chapter details how to setup the Windows that may be installed on the tablet for the first time. 3.1 Introduction The M101P Tablet Computer operates on Windows 10 IoT Enterprise operating system. Caution: Make sure the battery is full charged before starting the Tablet Computer for the first time with internal battery power.
Rugged Windows Tablet M101P 3. On the Here's the legal stuff screen, read through the disclosures, then tap Accept. 4. Windows will then try to connect to network. Tap Skip this step to continue without a wireless connection as you can then set up the network later. 5. On the Get going fast screen, click Use Express settings for the fastest setup. If you would like more information, tap Learn more, or if you would like to select your own options, click Customize settings.
Chapter 3: Setting Up Windows for the First Time 6. To create a local account, type your User name, password, and Password hint in the fields provided, then tap Next. 7. The initial setup screens are complete, and the desktop is displayed. 8. Read any introductory screens describing features of your computer, and tap Next upon completing each. You are now done with the initial setup process.
Rugged Windows Tablet M101P Chapter 4: Operating the Device This chapter describes how to operate the M101P Tablet Computer, including camera, Hottab, barcode, RFID, WWAN, WLAN, GPS features. Note: Please download the SDK from Winmate Download Center here. >> M101P >> Development Kit or check the Driver CD which is shipped with the tablet. Please notice that HF RFID reader, Barcode reader, and UHF RFID reader are optional module, please make sure user have ordered the module before using the SDK. 4.
Chapter 4: Operating the Device Icon Description Allows users to configure short cut to quickly access programs with a few tabs. Shortcuts Camera Device ON/OFF Allows users take a picture or record a video. User can also adjust setting related to camera in this menu option. Enables/disables tablet computer’s hardware functions. The configurable functions are Wi-Fi, WWAN (3G/4G/LTE), GPS, Bluetooth, Camera, LED indicators, Barcode Reader, RFID Reader, and GPS Antenna routing options.
Rugged Windows Tablet M101P This Hottab menu option allows users take a picture or record a video. Before use, make sure the camera is powered on under Devices ON/OFF menu with the following scenarios. To open camera interface: 1. Press the (Menu) button located on the front panel to open Hottab or launch the Hottab Utility. 2. Tap on "Device ON/OFF" button to check the built-in devices status. 3.
Chapter 4: Operating the Device 4.4 Built-in Devices On/Off This section describes how to get a quick access to set-up built-in devices, including turning on/off RF modules, setting up barcode reader, RFID reader, and expansion modules. 4.4.1 Using the Wireless LAN (Wi-Fi) To use the wireless LAN (Wi-Fi) feature to connect to the network, perform the following procedure: 1. Open the Hottab utility by press the (Menu) Button located on the front panel, OR launching the Hottab Utility application. 2.
Rugged Windows Tablet M101P 4.4.2 Using the Wireless WAN (3G/LTE) The Tablet Computer supports data connection with 3G/LTE modules and fits Micro-SIM card. (Note: 3G/LTE feature is optional). Install SIM-Card as described in the Ch.2 2.5.1 Installing SIM Card. To connect to the network using wireless WAN: 1. Open the Hottab utility by press the (Menu) Button located on the front panel, OR launching the Hottab Utility application. 2. Tap on the Device ON/OFF button. 3.
Chapter 4: Operating the Device 4.4.5 Turning On/Off LED Indicators The LED Indicators for Power Status, Battery Status, and RF Communication can be turned on/off from Hottab menu. To enable/disable the LED indicators: 1. Open the Hottab utility by pressing the (Menu) Button located on the front, OR launching the Hottab Utility application. 2. Tap on the Device ON/OFF button. 3. Check the status color of the Indicator icon: Item Status Color Description Orange LED indicator is enabled.
Rugged Windows Tablet M101P *To recover the connection, please tap on the button again to re-connect with Barcode Reader. 4.4.6.1 Device Configuring and Setting 1.Click on Windows and search for EZConfig-Scanning from the Start menu. 2.Click on EZConfig-Scanning v4_IE and allow the blocked content if browser is blocking the content. 3.Click on “Connected Device” icon and wait for system to discover the device (Honeywell N660X). 4.
Chapter 4: Operating the Device 4.4.6.2 Scanning mode Settings 1. Click on Device Settings under the Input/Output settings section. 2. Select the desire scanning mode from the drop-down menu shown as below. 3. After selecting a desire scanning mode, click on the “Save to Device” on the side bar.
Rugged Windows Tablet M101P Scanning Mode Manual Trigger Presentation Mode Streaming Presentation Mode Host Notify Mode Snap and Ship Mode Description When in manual trigger mode, the scanner scans until a bar code is read, or until the trigger is released. Two modes are available, Normal and Enhanced. Normal mode offers good scan speed and the longest working ranges (depth of field). Enhanced mode will give you the highest possible scan speed but slightly less range than Normal mode.
Chapter 4: Operating the Device 4.4.6.2 Setting the 1D/2D Barcode Scanner Symbologies The barcode scanner is shipped with default settings shown below. If the default setting suits the usage requirement, setting symbologies is not necessary.
Rugged Windows Tablet M101P ※Warning※ 1. The reset to default button will change all setting to default. 2. N660X could disconnect with system after clicking the reset to default button. If the Disconnection happened please scan barcodes below in the following steps. Step 1. Frist please scan the USB HID barcode: Step 2. Then please scan the USB Keyboard barcode: Step 3. Please run EZConfig-Scanning again by following 4.4.6.1 Device Configuring and Setting 4.4.6.3 Adding a Prefix or Suffix 1.
Chapter 4: Operating the Device 2.Click on Editor button under the Prefix or Suffix section and create Prefix/Suffix value by typing in the block or select desire characters in the Control chars, Printable chars, and Extended ASCII.
Rugged Windows Tablet M101P 3. When you finish creating Prefix/Suffix, please click on “Save to Device” on the side bar. 4. For checking the functionality of Prefix/Suffix, please chick on “Scan Data Window” icon on the top. Then scan a barcode to verify if the Prefix/Suffix appear correctly.
Chapter 4: Operating the Device 4.4.7 Using the HF RFID Reader The HF RFID Reader is optional for M101P Tablet PC and is not re-workable by the end user. To use this feature, please make sure the tablet PC is built-in HF RFID reader before use, or contact our sales contact window for more details. To enable the HF RFID Reader feature: 1. 2. 3. 4. 5. Open the Hottab utility by press the (Menu) Button located on the front panel, OR launching the Hottab Utility application. Tap on the Device ON/OFF button.
Rugged Windows Tablet M101P 4.4.7.1 RFID Trigger Setting Item Auto Scan Description The default setting for RFID trigger is Auto Scan. Under this setting, the RFID Reader will always be ready to scan tags. 1. When the RFID tag is detected from RFID antenna, the data will be read automatically. 2. User can define the RFID scanning frequency from the drop-down menu shown as below. The frequency can be from 1 second to 9 seconds. Single Scan User can also define the RFID Reader scanning as Single Scan.
Chapter 4: Operating the Device 4.4.7.2 Settings Item Sound Description The Sound check box defines whether a beep sound will come with the data scanning. Output to This setting defines the output type of the scanned data. Two options are available: Keyboard Wedge Under this setting, the data scanned is sent like keyboard data. The scanned data can be output directly to the demo area below this window, or user can also open other utility, such as Office Word or Notepad files, for data input.
Rugged Windows Tablet M101P Item Prefix Suffix Append Enter Append TAB Regex Filter Description User can type in this field to define the characters BEFORE the data scanned. User can type in this field to define the characters AFTER the data scanned. The check box user can defines to append an “Enter” which is followed by the characters. The check box user can defines to append an “TAB” which is followed by the characters.
Chapter 4: Operating the Device Note: User can download the SDK from Winmate Download center website >> M101P >> Development Kit or check the Driver CD which is shipped with the tablet. 4.4.7.3 RFID Output Setting Item Select RFID Output Type Description The default setting for built-in HF RFID Reader is to Read UID. For some applications, user might need to read or write further block data; the drop-down menu under this section can do this change.
Rugged Windows Tablet M101P 4.4.8 Turn on/off the GPS External Antenna The vehicle dock of M101P Tablet PC supports external GPS antenna through standard SMA connector. To work with external GPS antenna, please make sure the tablet PC is well installed to vehicle dock, and the vehicle dock has connected with external GPS antenna. When working with vehicle dock connecting to external antenna, user can switch GPS antenna from the internal one to the external one from Hottab menu.
Chapter 4: Operating the Device 4.4.10 Changing Touchscreen Modes The tablet computer supports three built-in operating modes for different usage scenarios: Mode Description Hand/Rain (Default) Stylus Glove In Hand/Rain mode the touchscreen rejects false inputs from liquid drops. When the liquid is removed, the touchscreen accepts touch inputs from bare fingertips.
Rugged Windows Tablet M101P 4.4.10.2 Switch via Programmable Function Buttons: To switch between the different touchscreen modes via the programmable function buttons, make sure the touchscreen mode switching is set to the programmable function buttons first. 1. 2. 3. 4. 5. Open HotTab utility by pressing (Menu) Button located on the front panel, OR launching HotTab Utility application. Tap on the Setting button. Tap on F1 icon. Tap on the Long Press icon.
Chapter 4: Operating the Device 4.4.11 Using the Expansion Module The Expansion Port is optional for M101P Tablet PC and is not re-workable by the end user. To work with Add-on module, please make sure the tablet PC is built-in expansion port before use, or contact our sales contact window for more details. The Ext. Module function allows users to choose either UHF RFID Reader or Smart Card Reader. Caution Do not open when the expansion port is not used To enable the add-on module from expansion port: 1.
Rugged Windows Tablet M101P 4.4.12 UHF RFID Reader Module The UHF RFID Reader is optional for M101P Tablet PC. Note: Download the SDK from Winmate Download center. >> M101P >> Development Kit or check the Driver CD which is shipped with the tablet. 4.4.12.1 How to Install 1. 2. 3. Remove expansion port cover from the rear side of Tablet PC. Remove the top two screws of the I/O cover. Align the pogo pin on UHF RFID module to the expansion port of Tablet PC; screw to fix the module on tablet. 4.4.12.
Chapter 4: Operating the Device Trigger Setting Item Description Auto The default setting for UHF RFID trigger is Auto Scan. Under this setting, the UHF Scan RFID Reader will always be ready to scan tags. 1. When the UHF RFID tag is detected, the data will be read automatically. 2. User can define the UHF RFID scanning frequency from the drop-down menu shown as below. The frequency can be from 1 second to 9 seconds. Single Scan User can also define the UHF RFID Reader scanning as SINGLE SCAN.
Rugged Windows Tablet M101P Settings Item Sound Description The Sound check box defines whether a beep sound will come with the data scanning. Region Basing on different regional regulations about UHF RFID frequencies, user can switch frequency to NA (North America, 902-928 MHz) or EU3 (Europe, 865-868 MHz)from the drop-down menu shown as below. Output to Keyboard Wedge: Under this setting, the data scanned is sent like keyboard data.
Chapter 4: Operating the Device Keyboard Wedge Under this setting, the data scanned is sent like keyboard data. The scanned data can be output directly to the demo area below this window, or user can also open other utility, such as Office Word or Notepad files, for data input. Important: Please notice that the input method should support the scanned character. Tap Settings button for further details settings.
Rugged Windows Tablet M101P Note: For more information, please download “Universal Reader Assistant” UHF module configuration application from Thing Magic website. Item EPC Description The EPC check box defines whether to show the complete information of EPC (Electronic Product Code), including Disconnect / Connect 1. The identifiers of the object(s) or other entities that are the subject of the event. 2. The date and time when the event took place, and the local time zone in effect. 3.
Chapter 4: Operating the Device 4.5 Settings This Hottab menu option provides users information such as PC Information, Battery status, and also device settings such as power management setting, and function key mappings. Perform the following procedure to access the Hottab Setting menu: 1. Open the Hottab utility by press the (Menu) Button located on the front panel, OR launching the Hottab Utility application. 2. Tap on the Settings button. 3. Below shows the items listed in Settings Menu. 4.5.
Rugged Windows Tablet M101P 4.5.3 Using the Physical Function Keys (Hotkeys) The function key mapping menu option allows user to change the physical function buttons, Fn1 and Fn2. Users can change what application will be launched with short press or long press of keys. To configure function key mapping, perform the following: 1. Open the Hottab utility by press the (Menu) Button located on the front panel, OR launching the Hottab Utility application. 2. Tap on the Setting button. 3.
Chapter 5: Frequently Used Settings Chapter 5: Frequently Used Settings 5.1 Screen Resolution Scaling and Setting The M101’s 1920 x 1200 high resolution display is perfect for viewing image, video, or other applications, however, Windows user interface (icons, buttons, and other user interface elements) may be too small to read and operate at the default Windows settings.
Rugged Windows Tablet M101P 1. A “Display” Window will show up. Click on the dropdown option under the “Scale and layout” section and change the scaling option to “150% (Recommended)” or any other desired display scaling. 5.1.2 Changing Screen Resolution Alternatively, instead of changing the display scaling setting, user may choose to change the overall resolution setting to make screen elements bigger. 1.
Chapter 5: Frequently Used Settings 2. Click on the dropdown option next to “Resolution” and select the desire resolution by tapping on the scale: 3. Hit “Apply”. A prompt “Display Settings” prompt will show up to ask the user if the applied resolution is usable. 4. If the new resolution is the desired display setting hit “Keep changes” and continue to next step. If the new resolution is not desirable, hit “Revert” and select a different resolution to change to, and start again from step 2. 5.
Rugged Windows Tablet M101P 5.2 Replacing Battery The M101P Tablet supports hot-swap, meaning the tablet doesn’t need to be powered off to replace the main battery. To support hotswap, there is a backup battery inside the tablet that is charged together with the main battery. This battery cannot be removed, and requires adequate power for main battery hot swapping. When the backup battery is fully charged, the tablet can sustain up to 5 minutes of runtime for battery hot-swapping.
Chapter 5: Frequently Used Settings 5.3 Using Recovery Wizard to Restore Computer M101P tablet computer has a dedicate recovery partition stored on the hard drive of the tablet to enable quick one-key recovery process. This partition occupies about 11GB of the storage space, and comes builtin to each M101P tablet computer. Warning! Before starting the recovery process, be sure to backup all user data, as all data will be lost after the recovery process. To enable quick one-key recovery procedure: 1.
Rugged Windows Tablet M101P 5. Wait till the recovery process to complete. During the recovery process, a command prompt will show up to indicate the percent of recovery process. 6. After recovery is completed, please press any key to continue, and the tablet computer will Shut down automatically.
Chapter 5: Frequently Used Settings 5.4 Docking Connector Pin Definition M101P tablet computer supports one 19-pin docking connector at the bottom side. The pin definition is listed as the following table. 19 Pin Docking Connector Pin No. Description Pin No. 1 11 RF_GND 2 12 DOCK_DET# 3 13 GPS ANT 4 14 RF_GND 5 15 RF_GND 6 16 NC 7 17 NC 8 18 DETECT+ 9 19 Power 10 Power Description NC NC GND Power USB+ USBGND GND DETECT- 5.
Rugged Windows Tablet M101P 5.6 COM Port Definition M101P tablet computer uses Hottab utility for built-in peripherals control. All the COM port numbers have been defined in the OS image coming with the package. COM Port COM 1 COM 2 COM 3 COM 4 COM 9 COM 11 COM 20 Device Reserved RS232 of Expansion Port (optional) HF RFID (optional) Bluetooth Auto Pairing GPS RS232 at Docking (optional) UHF RFID (optional) For some special applications, user might re-install OS and lose the COM port settings.
Chapter 5: Frequently Used Settings 2. Tap on "Port Setting" tab and click on "Advanced" button. 3. Tap on the dropdown list and choose the correct COM Port Number (refer to the COM Port Definition Table), and click "OK". 4. Double check "Device Manager" to make sure the COM Port number has been re-defined successfully, and then restart the system.
Rugged Windows Tablet M101P 5.7 Pairing with a Wireless Bluetooth Barcode Scanner The computer is affixed with a Bluetooth MAC (Media Access Control) address barcode label that enables wireless Bluetooth Barcode Scanner to quickly establish Bluetooth connection with the computer. It is encoded with leading characters to instruct the wireless Bluetooth barcode scanner to initial Bluetooth Serial Port Profile pairing request. 5.7.
Chapter 5: Frequently Used Settings 3. Once the Bluetooth & other devices Menu appears, click “More Bluetooth options” under Related settings section as shown below. Click OK to continue. 4. go to “Options” tab, and make sure that in the Discovery section, the computer is set to “Allow Bluetooth devices to find this computer”, as shown below: Click OK to continue. 5. In the Bluetooth Settings menu, go to “COM Ports” tab.
Rugged Windows Tablet M101P . 1. You are in “Add COM Port” window. Choose “Incoming (device initiates the connection)”, and click “OK”. 2. The computer will automatically assign COM Port to the Bluetooth connection. In the screenshot below, COM4 is allocated.
Chapter 5: Frequently Used Settings Click OK to continue. 3. Next, the user has to configure the application that is used to accept the scanned data from the wireless Bluetooth Barcode Scanner. The application has to be configured to accept the same COM Port that has been assigned for the Bluetooth Serial Port Profile in the previous step. Important: Make sure the application stays open while pairing. 4. Now the computer is ready for pairing process to start.
Rugged Windows Tablet M101P 5.7.2 Set up the Barcode Scanner for Bluetooth Pairing Important The wireless Bluetooth Barcode Scanner has to be configured as Bluetooth Serial Port Profile Master device to establish connection via Bluetooth MAC address barcode label. For a more detailed instruction, please refer to the User Guide for the wireless Bluetooth Barcode Scanner you are using for paring. Now the Barcode Scanner is ready for pairing process to start. 5.7.
Chapter 5: Frequently Used Settings In order to ensure that Bluetooth Device is successfully pared to the Computer, follow the steps below: 1. Locate the Bluetooth icon in the Notification Area. Select Show Bluetooth Devices. You can access this menu in the Control Panel: Windows Control Panel Devices and Printers Bluetooth Devices 2. Make sure your device is connected to the Computer.
Rugged Windows Tablet M101P Chapter 6: Troubleshooting 6.1 Basic Troubleshooting Problem Solution The removable battery is not charging. Make sure the AC adapter is properly connected, and that the removable battery is properly inserted. Nothing appears on the screen. The tablet computer may be in sleep mode. Press the power button to wake up the display. The brightness level may be too low. Increase brightness. The screen suddenly turns blank and the power indicator goes off.
Chapter 6: Troubleshooting Problem Solution I cannot project the tablet computer display to another monitor. Make sure the VGA driver is installed. Make sure the output setting selected is correct. Barcode scanner does not emit laser beam and does not seem to work. Make sure the Barcode scanner device is enabled in Hottab utility. Make sure under Windows, the Barcode Reader is set to COM 15 port, so that Hottab can trigger the Barcode Reader hardware.
Rugged Windows Tablet M101P Appendix Appendix A: Product Specifications M101P Model Name Size 10.1-inch IPS display with LED Backlight Resolution 1920 x 1200 WUXGA Touch 800 nits With direct optical bonding for sunlight readability Multi-touch projected capacitive Contrast Ratio 800:1 Viewing Angle 85/85/85/85 Brightness Display Specification Technology Processor System Specification Wireless Communications • Anti-glare technology • Automatic screen rotation Intel® Pentium N4200 1.
Appendix Model Name M101P LED Indicators Power, Battery, HDD, RF Sensors Light Sensor , G-Sensor, Gyroscope, E-Compass Web Camera 2MP webcam Rear Camera 8MP rear camera with autofocus and LED light Integrated Optional 1D/2D Barcode Reader Optional HF RFID Reader Add-on Module Optional add-on UHF RFID Reader or Smart Card Reader Security • Password security for user and hard disk lock • Trusted Platform Module (TPM) 2.
Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, New Taipei City 24158, Taiwan, R.O.C www.winmate.com Copyright © Winmate Inc. All rights reserved.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
RF Exposure Information and Statement The SAR limit of USA/Canada (FCC/IC) is 1.6 W/kg averaged over one gram of tissue. Device types: M101P-BH (FCC ID: PX9M101PH001, IC: 9911A-M101PH001) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use the body is 1.439W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body.
