ElegantIndustrial PDA E430RM4LSeries User Guide Version 1.
Preface Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners.
Customer Service We provide a service guide for any problem by the following steps: First, visit the website of our distributor to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance. You may need the following information ready before you call: Product serial number Software (OS, version, application software, etc.
Read Me First Safety Information Follow and adhere to all warnings and instructions in this manual. For your safety, please read all safety and operating instructions before using the product. Keep this manual for future reference. General Product Safety Sécurité générale des produits This product should not be used near water such as bathtubs, sinks, swimming pools, wet basement, etc.
Unplug this apparatus during lightning storms or when it is not being used for long periods. Débrancher cet appareil durant les orages ou lorsqu'il n'est pas utilisé pendant de longues périodes. Refer all servicing to qualified service personnel.
When the Battery Pack Has Deteriorated, Replace It with a New Battery. Continued use of a damaged battery pack may result in heat generation, ignition or battery rupture. Do Not Use This Product With Battery Other Than the One Specified. Ne pas utiliser ce produit avec une batterie autre que celle spécifiée Lorsque la pile est détériorée, la remplacer par une nouvelle pile. L'utilisation continue d'une pile endommagée peut occasionner une génération de chaleur, l'amorçage ou la rupture de la pile.
signals, do the following steps: To turn off the device: Press and hold the power button to display the PDA Options menu for 3 sec thentap thePOWER OFF To set the device into airplane mode: Press and hold the power button to display the PDA Options menu for 3 sec thentap AIRPLANE MODE To turn off the Communication options Select MENU , tap SETTINGS then tap WIRELESS& NETWORKS. FCC RF exposure guidelines for use with an accessory that contains no metal and the positions of the handset minimum of 1.
General Guideline Guide Général Keep the product at least 13 cm (5 inches)away from electrical appliances that can generate a strong magnetic field such as TV, refrigerator, motor, or a large audio speaker. Garder le produit au moins à 13 cm (5 pouces) de distance des appareils électriques qui peuvent générer un fort champ magnétique comme une télévision, un réfrigérateur, un moteur, ou un important haut-parleur. Do not place heavy objects on top of the tablet computer as this may damage the display.
Use a soft cloth to remove dirt on the display. The touchscreen surface has a special protective coating that prevents dirt from sticking to it. Not using a soft cloth may cause damage to the special protective coating on the touchscreen surface. To clean off hard to remove dirt, blow some steam on the particular area and gently wipe away using a soft cloth. Utiliser un chiffon doux pour enlever la poussière sur l'écran.
Important Information Countries/ Area Symbol This equipment complies with essential requirements of: Electromagnetic Compatibility Directive(2014/30/EU) European Union Low Voltage Directive (2014/35/EU) Radio and Telecommunication Terminal Equipment (R&TTE) Directive (2014/53/EU) USA FCC Part 15 Subpart B Regulations Class B EC Declaration of Conformity This equipment is in conformity with the requirement of the following EU legislations and harmonized standards.
Federal Communications Commission Radio Frequency Interface Statement This mobile PDA complies with part 15 of the FCC Rules.. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This mobile PDA has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
The FCC has granted an Equipment Authorization for this model PDA with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model PDA is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: PX9E430RM SAR compliance for body-worn operation is based on a separation distance of 15 mm between the unit and the human body.
IC NOTICE TO CANADIAN USERS This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to thefollowing two conditions: (1) This device may not cause interference, and (2) This device must accept anyinterference, including interference that may cause undesired operation of the device. This device complies This Class B digital apparatus complies with Canadian ICES-003.
Contents PREFACE .................................................................................................................................................................................... I READ ME FIRST ....................................................................................................................................................................... III SAFETY INFORMATION ...........................................................................................................
HOW TO LOCK APPLICATIONS ........................................................................................................................................................... 26 HOW TO UNLOCK APPLICATIONS ....................................................................................................................................................... 29 CHAPTER 4 CONNECTING TO NETWORK AND DEVICES ......................................................................................................
E430RM4L User Guide About This User Guide This User Guide provides information about using the Winmate® E430RM4L and accessories. Some pictures in this guide are samples and can differ from actual product. NOTE Documentation set The documentation set for the E430RM4L provides information for specific user needs, and includes: E430RM4L Series Quick Start Guide - describes how to get the E430RM4L up and running.
Chapter 1 Getting Started Chapter 1Getting Started This chapter tells you information about Winmate® E430RM4L Series PDA, its highlighted features, and provides basic instructions for using the E430RM4L, including powering on and resetting the E430RM4L. Introduction Thank you for purchasing Winmate® E430RM4L Series Industrial PDA.Winmate® E430RM4L Series Industrial PDA is an enterprise-class PDA with powerful mobile computing solution.
E430RM4L User Guide If any of the following items are missing or damaged, contact us. Standard packing list includes: E430RM4L Series PDA Quick Start Guide (hardcopy) Li-poly Battery Micro USB Cable Micro SD Card (4GB) *Universal USB Adapter Input: AC 100-240V 50/60 Hz Output : 5V-1A Hand Strap *Universal USB Adapter socket varies by country and region. E430RM4L will be shipped with the socket according to your order. Your package may include optional accessories based on your order.
Chapter 1 Getting Started Description Of Parts Front View Parts Description: No Item Description 1 LED Indicator LED indicator indicates the battery power or charging status 2 Light Sensor 3 Proximity Sensor 4 Webcam To capture a front view picture and use for Video call. 5 Speaker Speaker provides audio output. 6 Volume Up / Down Increases or decreases the call volume when a call is in progress. In other applications, it controls the volume of music or 7 4.
E430RM4L User Guide Opens the home screen with single touch 8 Capacitive Touch Keys Opens a menu with items that affect the current screen or application Opens the previous screen and to close onscreen keyboard if it is open and Return to the previous action Opens Google search 9 Micro USB Use for making a voice recordings 10 Pogo Pin Pogo-pin can be used for charging & extension function Rear View Parts Description: 5
Chapter 1 Getting Started No Item Description 1 5MP Rear Camera To capture a rear view picture and use for making videos. 2 LED Flash Light Use it as a flashlight to enhance light while making photos. 3 Strap Clip To install a hand strap 4 Barcode Reader (optional) 1D/2D Barcode Reader *Note: Will change to flat cover when without Barcode Reader 5 Speaker Provides audio output for music and video 6 Power Button Press and hold the button for 3 seconds to turn on E430RM4L.
E430RM4L User Guide Dimensions *Note: Measurements shown in mm. **Note: this is a simplified drawing and some components are not marked in detail. Please contact our sales representative if you need further product information.
Chapter 1 Getting Started Getting Started To start using the E430RM4L for the first time: Install SIM Card Install Micro SD Card Install the Battery Charge the E430RM4L Power on the E430RM4L Configure the E430RM4L SIM Card and SD Card Installation To Install the SIM Card and SD Card: 1. Place the E430RM4L facing down. 2. Press the two latches up and removable the battery. 3. Locate the SIM card holder 4.
E430RM4L User Guide 7. Pick and raise the SD card holder up in upright position and then put the SD Card into the socket. 8. Close the SIM card holder and push it into lock position until there is a click sound. Battery Installation Inserting the standard BatteryPack into the device: 1. 2. 3. 4. 5. Disconnect AC adapter and power cord from the device. Turn the device over, back facing up. Locate the Battery Lock Latch and push it to the “Unlocked” position.
Chapter 1 Getting Started Chargingthe Battery Please charge the battery before using the PDA for the first time, charge the battery until the LED indicator turns solid green. To charge the E430RM4L, use a cable or a docking with appropriate power supply. For more information about the E430RM4L accessories, refer to Chapter 6.
E430RM4L User Guide Turning On and Off the Device This section describes how to turn on/ off the device. Turning ON 1. Press and hold the power button for 3 seconds, located on the right side of the unit. 2. When the device vibrates, release the power button. The desktop screen is displayed. Turning OFF 1. To turn off the device, press and hold the power button until the PDA options menu appears, tap the Power Off. 2.
Chapter 1 Getting Started Resetting to Factory Defaults To reset the device to factory defaults: 1. Tap Menu , than tap Settings 2. In the Personal tab, tap Backup & Reset. 3. User can select to back up application data, passwords and other settings to Google servers by tapping Backup My Data. 4. Tap Factory Data Reset to reset the PDA. 5. Read all the available information and then check Erase PDA storage if user wants to erase all the data on the PDA storage such as music or photo.
E430RM4L User Guide Chapter 2 Using the Device This chapter explains how to use the buttons, status cons, and controls on E430RM4L PDA running on Android 5.1 Operating System, provide instructions on entering and capturing data. Using the Touch Screen The touchpad supports the core gestures for Android.
Chapter 2 Using the Device Wake Up the PDA If you do not use the PDA for a while, the screen dims and then darkens to conserve the Battery. To wake up the PDA: 1. Press the Power button on the right side of the PDA. 2. Drag the lock icon up . Using the Home Screen Home screen is the starting point to access all the features on your PDA Device. It displays application icons, widgets, shortcuts, and other features. User can personalize the home screen. See “Personalizing home screen”.
E430RM4L User Guide Personalizing Home Screen User can add application icons, shortcuts, widgets, and other items to any part of any Home screen where there is free space. User can also switch the wallpaper. To change wallpaper on the HOME SCREEN: 1. Tap MENU , and then open Settings. 2. In the Device tab, tap Display > Wallpaper. 3. In the Wallpaper menu select the location of wallpaper, and then tap the type of item you want to add.
Chapter 2 Using the Device To move an item on the HOME SCREEN: 1. Tap and hold the item you want to move, until it can be moved. 2. Drag it to a new location on the screen. 3. Place the item where you want to put it and lift your finger. To remove items from the HOME SCREEN: 1. Tap and hold the item you want to remove. The launcher icon will show Remove on the top of the screen. 2. Drag the item you want to remove to the Remove icon. 3. When the icon turns red, release your finger.
E430RM4L User Guide Viewing other parts of the Home Screen 1. Slide your finger left or right across the Home screen Extensions to the Home screen provide extra space for APPS, shortcuts, and other items. 2. Tap the launcher icon to view the entire APPS of the device. The status bar appears at the top of every screen. On the left are notification icons and on the right are status icons, along with the current time.
Chapter 2 Using the Device Status and Notification Icons Notification Icons Pull down from the left top of the screen to get the notifications area. The following icons indicate that you have received notification. Using the On-Screen Keyboard User will be able to enter text using the On-Screen Keyboard. Some applications will launch the keyboard automatically. In others, user needs to touch a text field where user wants to enter text to launch the keyboard. Entering Text 1.
E430RM4L User Guide *If user taps in a text field which already contains text, the insertion point is set where user tap and the cursor appears. User can drag the cursor to pick exactly where you want to add more text. User can also select a word to copy, cut and paste it. See “Editing Text”. 2. Tap the delete key to erase characters to the left of the cursor. 3. Tap to enter numbers. Tap to return to letters. 4.
Chapter 2 Using the Device To Cut or Copy Text: 1. Select the text to cut or copy, see the section above“To select text”. 2. Tap or 3. If you select in the Edit text menu. , the selected text is removed from the text field; it is stored in temporary area so that you can paste it into different text field. To Paste Text: 1. After Cut or Copy the text, see the section above “To Cut or Copy Text” 2.
E430RM4L User Guide 1. Tap MENU and then tap Settings. 2. In the Device tab, tap Display: Personalize o MiraVision™ - to display picture quality optimization options. o Wallpaper– to select wallpaper Display o Brightness level– for adjusting the brightness of the screen.
Chapter 2 Using the Device Audio Profile Settings Use the sound settings to configure how and at what volume the PDA rings, vibrates or alerts user in other ways when user receive a call, receive a notification or an alarm sounds. Sounds Settings 1. Tap MENU and then tap Settings. 2. In the Device tab, tap Sound & Notification and then user can select General, Silent, Meeting or Outdoor profile. Adjusting Volume 1.
E430RM4L User Guide Language and Keyboard Settings Use the Language & keyboard settings to select the language for the text on your PDA and for configuring On-Screen Keyboard, including words that you have added to its dictionary. 1. Tap MENU and then tap Settings. 2. In the Personal tab, select Language & Input. Language – to open the language screen, where user can select the language to use for the text on the device.
Chapter 2 Using the Device Changing the Keyboard Language The current keyboard language is displayed on the Space key and user can switch languages. 1. Tap and hold the space key 2. Without lifting the finger, slide it to the left or right until the language you want to use appears in the center of the small window above the Space Key. 3. Lift the finger to change the keyboard language.
E430RM4L User Guide About Phone About Phone includes information about user’s PDA. System Update — provides information regarding the local or online update of your devices. Status — opens the status screen with a list of information about battery, network, signal strength and other details. Legal Information — lists details about the model number, Android Version, Baseband version etc. this information is useful if user need to work with support team.
Chapter 3 Using Winmate Home Manager Chapter 3 Using Winmate Home Manager Every E430RM4L series PDA comes with preinstalled APP named Winmate Home Manager (WHM). This application lets the device manager to lock the launcher. When the launcher is locked the user can only use one application assigned by the device manager. How to Lock Applications Step 1 In the main APPS window, select the Home Manager APP and enable it. Select Home Manager to start your settings.
E430RM4L User Guide Step 4 Select “Restrict Home” , and then restart the PDA. Step 6System will ask to select “Just once” or “Always” to use this launcher, please select “Always”.
Chapter 3 Using Winmate Home Manager The system will automatically start the application which you selected and lock it. Any time you press home key or back key, the system will go back to the same application which you have selected.
E430RM4L User Guide How to Unlock Applications Step 1 Slide down the top bar and press “Home Manager” icon then you can find the menu and please enter the password to login (The default password is “0000”). Step 2 Go back to “Home Selector” and press “Clear and Reset Default Home”.
Chapter 3 Using Winmate Home Manager Step 3 Restart the system and you will go back to the normal Launcher.
E430RM4L User Guide Chapter 4 Connecting to Network and Devices This chapter explains how to connect PDA to network and peripheral devices. Connecting to Computer via USB User can connect their PDA to a computer with USB cable to transfer files between PDA and computer. When connecting your PDA to a computer and inserting its USB storage or SD card, user must follow the computer’s instructions for connecting and disconnecting USB device, to avoid damaging or corrupting files.
Chapter 3 4. Using Winmate Home Manager Tap this icon to choose the type of USB connection. USB storage –let user transfers files between computer and PDA. Media device (MTP) – let users transfer media files. Camera (PTP)–let users transfer photos using camera software, and transfer any files on computer that don’t support MTP. Charge only– stop all USB functions and let users speed up USB charging.
E430RM4L User Guide Carefully follow your computer’s instructions to un-mount the USB storage or SD card. Disconnect USB device not properly can cause a loss of important data or information.
Chapter 5 Using the Camera Chapter 5Using Camera This chapter explains how to use camera to capture photos and videos. Capturing Photos or Video Winmate® E430RM4Lequipped with 8 MP on the rear side and 2 MP on the front side, which user can use to capture photos or video. Opening Camera 1. Tap the launcher and then tap Camera . Camera opens in Portrait mode, ready to take a picture or shoot a video. Make sure the protective lens cover is clean before taking pictures.
E430RM4L User Guide Switching between front and rear cameras E430RM4L has both a front and rear camera, user can select which camera you want to preview and take pictures with. 1. Tap the On Screen Select Camera icon to switch between the rear camera and the front camera . 2. The preview switches to show the scene viewed from the camera you selected. Not all features (such as flash) are available for the front camera. NOTE Viewing pictures 1.
Chapter 5 Using the Camera Opening the Gallery 1. Tap the launcher and then tap Gallery . 2. Tap a folder to view the pictures or video inside in full screen mode. 3. Flick the pictures left or right to view the previous or next picture.
E430RM4L User Guide Chapter 6 Data Capturing This chapter explains how to use Barcode Reader with Android Winmate® Data Collection application, Smartcard Reader and Fingerprint Scanner that might be present in E430RM4L. Android Winmate Data Collection (WDC) Winmate® Android Device is equipped with embedded 1D/2D barcode reader. WDC, software invented by Winmate®, allow users to turn on the readers and set up the button to trigger the scan function.
Chapter 6 Data Capturing How to Turn On/Off the Power of Barcode Reader? 1. Go to the WDC application. 2. Tap Barcode Setting. 3. Once the user entered the WDC application, the device will automatically turn on the Barcode Reader. And the user can turn off the Barcode Reader by tapping Barcode Power Status: ON.
E430RM4L User Guide How to change the symbologies of Barcode? 1. Go to the WDC application. 2. Tap Barcode Setting. 3. Tap Barcode Preference. 4. Users can change the symbologies of the barcode: 1D Symbologies 2DSymbologies Imager Options User Preference Disable all symbologies. How to add command to my output of the barcode? 1. Go to the WDC application. 2. Tap Prefix / Suffix. 3. Enter special characters at the beginning (prefix) or end (suffix) of the scanned barcodes. 4.
Chapter 6 Data Capturing How to change the scan type for the Barcode Reader? 1. Go to the “WDC” application. 2. Go to Barcode Settings , tap Trigger Settings. 3. Select the Scan Type or select read time of the Barcode Reader. To start scanning user has to leave the WDC application. Auto Scan – Barcode Reader starts auto-scanning once the user leaves the WDC application. Single Scan– Barcode Reader starts scanning only when user presses the trigger button.
E430RM4L User Guide 4. Users can reset to the default setting by tapping Reset setting. Scanning the Barcode How to scan the barcode? 1. Press the function button to trigger the barcode. 2. Aim the barcode. 3. Ensure the entire barcode is within the rectangular area formed by the brackets in the laser framing. 4. Release the trigger.
Chapter 6 Data Capturing Scanning Tips and Considerations Distance Scanning device will decode perfectly over a certain working range, there are minimum and maximum distance from the barcode. To specify the appropriate working range per barcode type is through a table as follows. Symbology Code 39 EAN / UPS 100% DataMatrix PDF417 Density 0.100 mm 0.125 mm 0.500 mm 1.000 mm 0.33 mm 0.18 mm 0.25 mm 0.38 mm 0.25 mm 0.38 mm Min Distance 9.5 cm 8.0 cm 6.5 cm 9.5 cm 6 cm 7.5 cm 6.0 cm 5.5 cm 5.5 cm 6.
Chapter 7 Accessories Chapter 7 Accessories E430RM4Laccessoriesprovide a variety of product support capabilities. Some of the accessories are optional and are not included to standard packaging list. Standard Accessories E430RM4L Standard Accessories: *Universal USB Adapter Micro USB Cable Bluetooth Manager Screen Protector Micro SD Card (4GB) Hand Strap *Universal USB Adapter socket varies by country and region. E430RM4L will be shipped with the socket according to your order.
E430RM4 User Guide Universal USB Adapter Universal USB Adapter allows charging the E430RM4L from USB cable. To charge the E430RM4L connect USB cable to the E430RM4L from one side and USB Adapter from another side and plug in the socket to the power outlet. Power Considerations: Input: AC 100-240V 50/60 Hz CAUTION Output : 5V-1A Micro USB Cable Micro USB Cable provides power to the E430RM4L and USB communications with a host computer.
Chapter 7 Accessories Bluetooth Manager Provides interface for managing the Bluetooth. Micro SD Card Micro USB Card slot is located on the rear side of E430RM4L. To access it press two latches up and remove the battery. ForMicro SD Card installation instructions, refer to Chapter 1, “SIM Card and SD Card Installation” of this User Guide. Screen Protector Protect touch screen against dirt and water. Hand Strap Hands strap to firmly grasp the device without having the fear of dropping it.
E430RM4 User Guide Optional Accessories E430RM4LOptional Accessories: Two Slot Battery Charger Model name: BD-E430R Charging Dock Model name: MD-E430R Micro USB Host Cable (OTG Cable) Battery Lanyard Soft Case Holder Bluetooth Printer 46
Chapter 7 Accessories Two Slot Battery Charger The battery charger allows charging up to two battery units simultaneously, ensuring you will never be stuck in-between charges. 2 x charging slots PoGo Pin type 2 x LED light Shows current power level 1 x DC in 12V / 50W DC in Buzzer 4-level volume control Refer to Chapter 2, section “Battery Charging” for detailed instructions on charging the battery using docking.
E430RM4 User Guide Micro USB Host Cable (OTG Cable) The USB Host cable OTG (On-the-Go) function isto act as a host allowing a USB flash drive to be attached. Bluetooth Printer Mobile printer allows to print labels and stickers directly from E430RM4L. Mobile thermal receipt printer Features Quick and efficient printing Rugged design withstands drop up to 1.2m Long-lasting lithium-ion battery (7.
Chapter 7 Soft Case Holder Soft Case Holder is made of leather with vinyl screen protector and shoulder strap. It keeps the device free of fingerprints and dirt. Lanyard Lanyard provides a secure feel when using your E430RM4L series Rugged PDA while on the move. Lanyard is only supported by E430RM4L Barcode and RFID Series.
Appendix A Product Specifications Appendix A: Product Specifications Display Specification Size Resolution Brightness Touch Processor System Memory System Specification Storage Operating System Wireless Communications Model Name E430RM4L 4.3” 480 x 800 400(typ.) Projective Capacitive Multi-touch ARM® Cortex™-A7 Quad Core 1.5GHz 1GB SDRAM 8GB eMMC (optional to 32GB, MOQ:1K) External Micro SD Card (up to 32GB) Android 5.
Appendix A Operating Temp. Shock Vibration Drop Battery Power Management Battery Operating Time Adapter Product Specifications -20°C ~ +60°C (AC Mode) -10°C ~ +50°C (Battery Mode) MIL-STD-810G Method 516.6 Procedure I MIL-STD-810G Method 514.6 Procedure I MIL-STD-810G Method 516.6, 4 ft, Free to concrete 3.7V 3900mAh Li-poly removable battery 20Hr * 5V 1A Adapter * Note: measured at dimming LCD brightness. Varies depending on the usageconditions, or when an external device is attached.
Appendix B Order Information Appendix B: Order Information E430RM4L Series available in the following configurations: Model Number Specifications E430RM4L Standard E430RM4L-3BM 1D/2D Barcode Reader E430RM4L- 3HF HF RFID Reader 52
Appendix D Winmate Software Development Kit Appendix D: WinmateSoftware Development Kit Winmate® provides Software Development Kit (SDK). The table below lists SDK provided by Winmate. Winmate® SDK for E430RM4L: Item Type Purpose 1 SDK Winmate Data Collection (WDC) 2 Driver USB Driver 3 Update tool and SOP Operating system (OS) update tool and SOP Download SDK from Winmate Download Center or Winmate Partner Portal. 1. Winmate Download Center: http://www.winmate.com.
Winmate Inc. 9F, No.111-6,Shing-De Rd., San-Chung Dist., Taipei 241, Taiwan, R.O.C Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Email: sales@winmate.com.tw Official website: http://www.winmate.com.