Manualshelf

User Manual

ManualsBrandsWinegard ManualsAccessories & SuppliesFlatWave Amplified Razor Thin HDTV Indoor Antenna
12
IMPORTANT! IMPORTANT! IMPORTANT!
First time users must run a channel scan after installing the antenna to the TV in order to receive
maximum programming.
Run a channel scan in the following circumstances, as well:
• Every month
• Anytime the antenna is moved
• If the television loses a channel
A new scan will find any new channels that have been added in your area as well as finding any channels
that have changed or moved. While the steps to perform a channel scan may vary from TV to TV, below are
some general guidelines to follow. For more specific instructions, refer to your television owner’s manual
for assistance.
General Instructions*:
1. Using the television remote that came with the TV or the converter box, select “Menu.”
2. Select “Settings.”
3. Select “Channel Setup.” (If you have a converter box, skip to step #5.)
4. Select “Antenna” or “Air.” Make sure channel scan settings are not set for “Cable.”
5. Select “Channel Search” or “Channel Scan.” Scan time will vary based on the number of channels
available in your area.
*Steps to perform a channel scan may vary. For further assistance, refer to your television owner’s manual.
Rev2 5-13 2452212
IMPORTANT! IMPORTANT! IMPORTANT!
First time users must run a channel scan after installing the antenna to the TV in order to receive
maximum programming.
Run a channel scan in the following circumstances, as well:
• Every month
• Anytime the antenna is moved
• If the television loses a channel
A new scan will find any new channels that have been added in your area as well as finding any channels
that have changed or moved. While the steps to perform a channel scan may vary from TV to TV, below are
some general guidelines to follow. For more specific instructions, refer to your television owner’s manual
for assistance.
General Instructions*:
1. Using the television remote that came with the TV or the converter box, select “Menu.”
2. Select “Settings.”
3. Select “Channel Setup.” (If you have a converter box, skip to step #5.)
4. Select “Antenna” or “Air.” Make sure channel scan settings are not set for “Cable.”
5. Select “Channel Search” or “Channel Scan.” Scan time will vary based on the number of channels
available in your area.
*Steps to perform a channel scan may vary. For further assistance, refer to your television owner’s manual.
Rev2 5-13 2452212

Summary of content (2 pages)