SCR200MO Hardware Guide Version 0.
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager Copyright © Copyright 2020, Windcave Inc. www.windcave.com All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the express written permission of Windcave Inc. Proprietary Notice The information described in this document is proprietary and confidential to Windcave Inc.
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager Document Revision Information and Amendments All amendments are to be identified and the manual updated, noting the amendment on this amendment page. Version Date Section Revision Information Amended by 0.1 2020/05/25 All KH 0.2 2020/06/08 1 2 0.3 2020/06/10 3 0.
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager Contents 1 2 Overview................................................................................................................................................................ 4 1.1 Introduction ................................................................................................................................................ 4 1.2 Hardware Models .......................................
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager 1 Overview 1.1 Introduction The Windcave SCR200MO solution is a contactless secure card reader. It can act as an accessory to the SCR200F for the handling of contactless reads, or act as a standalone contactless payment solution. The standalone option provides a simple solution for accepting contactless payments in an unattended card present environment; where only contactless payments are required.
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager 2 SCR200MO 2.1 Hardware Overview • • • Modular Design Secure crypto MCU designed for POS applications Hardware accelerated encryption (Triple DES, RSA and AES) and a CRC engine • • Contactless Reader Dedicated tamper grid 2.1.1 Physical Link Interface Refer to connectivity 1.3 2.1.2 Power Requirements The device accepts DC regulated from +9V to +45V SELV (Safety Extra Low Voltage). 2.1.
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager 2.1.4 Standards & Compliance • • • EMVCo L1 Contactless L2 Contactless PCI PTS V5.x: SRED (Secure Reading and Exchange of Data) • • • • FCC AusPayNet TQM RoHS 2.1.5 Additional Comments 2.1.5.1 FCC Part 15 User Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. 2.
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager 2.2 SCR200MO Dimensions SCR200MO Hardware Guide Page | 7 of 12 Version: 0.
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager SCR200MO Hardware Guide Page | 8 of 12 Version: 0.
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager 3 Machine Face & Cut-out Dimensions 3.1 SCR200MO Recommended cut out dimensions for customer equipment. Please note that this plate is not supplied as part of the Windcave Hardware and is the responsibility of the customer to arrange their selected mounting method. All non-dimensioned lengths are subject to individual customer machine fronts. Customer mounting plate must be a non-metallic material.
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager 4 Installation # Description Default QTY 1 SCR200MO-A 1 2 TAPE SCR200MO FRONT CASE MOUNTING VHB 1 3 CUSTOMER SUPPLIED EQUIPMENT, NOT PROVIDED BY WINDCAVE INC. 1 SCR200MO Hardware Guide Page | 10 of 12 Version: 0.
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager 5 Maintenance 5.1 Tradeouts & Deactivation Process In the event that the SCR200MO unit needs to be swapped out or deactivated, please follow instructions below. 1) Call Windcave Support to log a ticket. Please provide the following information. 1. 2. 3. 4. 5. Serial Number of SCR200MO. Brief description of fault / reason for deactivation. Contact Name. Contact Phone Number.
Procedure: Number 56 – SCR200MO Hardware Guide Date: June 2020 Approved by: Implementation Manager 6 Document Control Procedure Document Owner Implementation Consultant Process Owner Implementation Manager Document Approver Implementation Manager Distribution List Audit Date Implementations, Global Trainer, Service Delivery Manager, Hardware Engineer Audit Frequency Annually This document will be reviewed in accordance with the audit frequency, but may also be updated to reflect changes as required