User's Manual Part 2

ManualsBrandsWIN ACCORD ManualsCamera & PhotoDigital Photo Frame

Replacing the Remote Control Battery

If the remote control stops working or works improperly, replace the battery

(CR2025 lithium battery) with a new one.

1. Pull out the battery holder.

2. Remove the old battery from the holder and then put a new battery with

“+” facing up.

3. Insert the battery holder back to the remote control.

Notes

 When the lithium battery becomes weak, the operating distance of the

Remote Control may shorten, or the Remote Control may not function

properly. In this case, replace the battery with a CR2025 lithium battery.

Use of another battery may present a risk of fire or explosion.

 Dispose the used batteries as specified by the local authorities.

 Do not leave the Remote Control in a very hot and humid place.

 Incorrect use of the battery may cause leaking and corrosion.

- When the Remote control will not be used for a long period of time,

remove the battery from the remote control to prevent leaking and

corrosion.

- Incorrectly inserting, shorting, dismantling, or heating the battery,

or throwing it into a fire may cause the battery to rupture and leak.

Warning

Battery may explode if mistreated. Do not recharge,

disassemble or dispose of in fire

Summary of content (8 pages)

PAGE 1
Replacing the Remote Control Battery If the remote control stops working or works improperly, replace the battery (CR2025 lithium battery) with a new one. 1. Pull out the battery holder. 2. Remove the old battery from the holder and then put a new battery with “+” facing up. 3. Insert the battery holder back to the remote control. Warning Battery may explode if mistreated.
PAGE 2
Product Specification Features  Supports JPEG and BMP image formats  Image rotation, zoom in, background music  Display files by name or by date  ArcSoft™ effects: Dynamic Lighting, Face Beautify, and Face Tracking Specification Product 10.
PAGE 3
Using the Digital Picture Frame After the Digital Picture Frame is turned on, the slide show starts automatically after 2 seconds. Press EXIT button to Select Mode screen.  Select Mode In Select Mode, you will see below screen. There are 6 options: Card Selection, Photo, Music, Video, File Management, and Time. Card Photo Music Video File Time  Card Selection If there is not any memory card inserted, “Internal Memory” shows. When the memory card is inserted, ex.
PAGE 4
 Photo  By pressing SETUP, there are options of File Sorting, Copy Photo(memory card to internal memory), Delete Photo (from internal memory), Factory Default, Select Card, Display Image Size, Magic Window, Slideshow Transition, Slideshow Speed, ArcSoft™ Screen Effect, and Adjust LCD Color.  By pressing ZOOM or ENTER once, the single photo displays. - Press ENTER to start or pause the slideshow. - Press ZOOM to zoom in the image. - Press ROTATE to rotate the image 90° counterclockwise.
PAGE 5
 Video  In Video, the file list will be on the left side and the preview will be on the right side.  Press ENTER to play the video, RIGHT to forward, LEFT to backward, UP to play last video, and DOWN to play next video.  By pressing SETUP, there are options of File Sorting, Copy Movie (memory card to internal memory), Delete Movie (internal memory), Factory Default, Select Card, and Video Playback Repeat.
PAGE 6
 Time  In time, the slide show plays at the left side, calendar shows at the right side, and the time is displayed at the bottom.  When the alarm is set, the red alarm icon shows.  The date of today will be shown as yellow.  Press SETUP to setup alarm, clock, and date, as shown below. -Set the alarm time duration at the first block. The alarm will be ringing for every 3, 5, or 10 minutes. -Set the alarm for once or daily at the second block.
PAGE 7
Frequently Asked Questions Q: How do I set up my Digital Picture Frame? A: It is very simple to get you Digital Picture Frame out of the box and running in just a few minutes. Just plug the power adapter into the Digital Picture Frame and into a standard wall socket. Insert a memory card into the appropriate card slot on the side of the Digital Picture Frame and turn it on. Your first slideshow will automatically start to play.
PAGE 8
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.