0" Wide Screen Digital Photo Fr ame
Table of Contents Table of Contents..................................................................................................................2 Important Safety Precautions.................................................................................................3 Cleaning the LCD Screen...................................................................................................3 Cleaning the Digital Picture Frame............................................................................
Important Safety Precautions Always follow these basic safety precautions when using your Digital Picture Frame. This will reduce the risk of fire, electric shock, and injury. Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture Warning: To prevent the risk of electric shock, do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to qualified personnel. The Digital Picture Frame is for indoor use only.
Introduction Welcome to the Digital Picture Frame! Now you can display your digital photos directly from your memory card. No computer is necessary. Simply insert a memory card into the Digital Picture Frame and turn on the power. You'll be treated to a slideshow of your photos. It's as easy as that. You can also display individual photos, play video clips, and play background music with your slide show.
What's In the Box Digital Picture Frame AC Power Adapter (12V, 1.5A) This User's Guide Remote Control Setting Up the Digital Picture Frame The Digital Picture Frame is easy to set up. Just follow these steps: 1. Plug the AC Power Adapter into the Digital Picture Frame and into a wall outlet. 2. Insert a memory card into the appropriate slot.
Note: The card will only fit in one direction; do not force it. The card should fit snugly when properly inserted. 3. Press the power button on the back of the Digital Picture Frame ON and holding 2 Seconds. until the LED light is on beside the Digital Picture Frame. It will automatically start a slide show of the photos on the card. 4. To display photos individually, press the Exit button to open the Thumbnails Screen. Use the Left and Right arrows to choose a photo.
Use the Remote Control The remote control included with your digital picture frame may look slightly different from the one shown here, but it includes all of the same buttons, and functions in the same way. ON/OFF DIGITAL PICTURE FRAME Install and Replace the Remote Control Battery 1. Hold the Remote Control with the control buttons facing downward. 2. While pressing down on the ridged area of the battery cover, pull the tray out. 3.
Setting Up the Slideshow You can control all of the Digital PictureFrame functions with the buttons on the top of the frame or with the remote control. To display the setup screen, simply hold down the Exit button for 2 seconds, or press the Setup button on the remote control. Card Selection Screen Use the Card Selection menu to choose between memory cards and the build-in memory. 1.
Mode Selection Screen The Mode Selection Screen shows after you choose the memory source. Use it to choose the type of files you wish to display. Slide Show Photo Music Video Clock Display slide show Display JPEG still photo slide shows. Play audio files. Show motion JPEG AVI movies. Clock & Calendar 1. Press the Left and Right arrows on the Remote Control or the Digital Picture Frame to select the mode. 2. Press Enter to make the selection. If you selected PHOTO, the Thumbnail Screen opens.
Display a Single Photo on the Full Screen You can choose a single photo to display, without a Slide show. 1. With the Thumbnails screen displayed, press Enter to display the selected photo on the full screen. 2. Press the Left Arrow to return to the previous photo. 3. Press the Right Arrow to display the next photo. 4. To stop the display and return to the Thumbnail screen, press the Exit button.