PHOTO
Important Safety Precautions Always follow these basic safety precautions when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, and injury. Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. Warning: To prevent the risk of electric shock, do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to to qualified Personnel The Digital Photo Frame is for indoor use only.
Introduction Welcome, Now you can display your digital photos directly from your memory card, no computer is necessary. Simply insert a memory card into the Digital Photo Frame, and turn on the power. You'll be treated to a slideshow of your photos. It's as easy as that. You can also display individual photos, play video clips, and play background music with your slide show. The Digital Photo Frame includes these key features: Displays digital photos (JPEG) without a computer.
Setting Up the Digital Photo Frame The Digital Photo Frame is easy to set up. Just follow these steps: 1. Plug the AC Adapter into the Digital Photo Frame and connects it to a wall outlet. 2. Insert a memory card into the appropriate slot.
Locating the Digital Photo Frame's Features Photo and description of buttons on the Photo Frame. Using the Control Buttons and Remote Control You can use all of the Digital Photo Frame's features with either the buttons on top of the frame or using the remote control. Use the Control Buttons The control buttons are located on top of the Digital Photo Frame. Their basic functions are the same no matter when you press them.
Use the Remote Control The remote control included with your digital Photo frame may look slightly different from the one shown here depending on models. Install and Replace the Remote Control Battery 1. Hold the Remote Control with the control buttons facing downward. 2. Press the latch and pull the tray out. 3. Place a "CR2025" Lithium battery on the tray with the positive "+" end facing toward you. 4. Close the tray.
Setting Up the Slideshow You can control all of the Digital Photo Frame functions with the buttons on the top of the frame or with the remote control. To display the Select Card menu, simply hold down the Exit button for 2 seconds, or press the Setup button on the remote control three times. Card Selection Screen Use the Select Card menu to choose between memory cards and built-in memory.
Mode Selection Screen The Mode Selection Screen shows after you choose the memory source. Use it to choose the type of files you wish to display. (Video & Music modes may not be available on some models) 1. 2. Display JPEG still photo Photo Play audio files (MP3). Music Display files in memory cards or built-in memory File Video Show motion JPEG AVI movies Time Clock & Calendar Press the Left and Right arrows on the Remote Control or the Digital Photo Frame to select the mode.
4. To stop the display and return to the Thumbnail screen, press the Exit button. Controlling the Slide Show and Photo The digital Photo Frame provides many options for customizing the display, and managing files. These options are available when viewing photos only. Manually Change the Displayed Photo During a Slide Show, each photo replaces the previous one at a selected frequency (See Slide Show Speed). You can also change the displayed photo at any time during a slide show.
Caution: The photo will be deleted immediately; you will not be able to change your mind. 4. Press Exit to close the menu. Adjust the LCD Color Choose this option to adjust the Brightness, Contrast, Tint, and Color o the display. 1. Press the Setup button. A setup menu opens. 2. Press the Up or Down arrow to select Adjust LCD Color. 3. Press Enter. A second menu opens. 4. Use the Arrow buttons to select an option to adjust. 5. Use the Right and Left arrows to adjust the option.
Copy pictures from Flash Card into Built-in memory (May not be available on some models) (1)In the Thumbnail Screen a. Select pictures press Up, Down, Left and Right button. b. Confirm by press Vol+ button; Cancel by Vol- button. c. Press Setup button firstly, then select copy picture and then copy selected. Other way: press Setup button firstly, then select Copy Picture, and then Copy All, in this way, all the pictures will be copied into built-in Memory. (2) In the File Mode a.
Listening to Music (May not be available on some models) If there are Music files (MP3 format) on a memory card or in the built-in memory, you can play them on the Digital Photo Frame. 1. Use the Remote Control to open the Mode Selection screen and select Music. A new screen opens listing all of the music files on the selected card. 2. Use the left and right arrows to choose a file. 3. Press the Enter button to play the file. 4. To stop the music and return to the Music screen, press the Exit button.
Setting Clock and Calendar The Digital Photo Frame has built-in clock, alarm clock and calendar. Entering Clock Mode and select Setup, you will see the options: Set Current Time. Notice: please press Left/Right key to choose the hh-mm-MM-DD-YY, and press Up/Down key to modify the number of time, and press Enter to save the settings. Setting Viewing Options You can control all viewing options in the Setup Menu using the buttons on the top of the frame or the remote control.
Main Menu (some options may not be available depending on the model) Display Options Settings Language Magic Window (Split Screen) Description Choose any language from the displayed list On Off Turning off magic window will allow you to view pictures one at a time instead of four during slide show The Digital Photo Frame can optimize your Display Image Size Original/Optimal photos to display on the screen.
Advanced Operations In addition to the basic functions described previously, you can connect the Digital Photo Frame to your computer to copy files to the built-in memory. Connect to a Windows Computer To copy files from between your computer and the Digital Photo Frame do the following: 1. Plug in and turn on the Digital Photo Frame. 2. Connect the small end of the USB cable to the USB port on the side of the digital Photo Frame. 3.
7. To copy files from the card, simply select them and drag them to the desired location on your computer. 8. To copy photos from your computer to the card; first locate the files on your computer. Most cameras and graphic programs store photos in the Windows My Pictures folder. If you didn't move them somewhere else, they are Probably there. 9. Select the files you wish to copyright-click and selects. Copy, or simply drag them to the card's folder.. 10. Right-click in the windows, and choose Paste.
Frequently Asked Questions Q: How do I set up my Digital Photo Frame? A: It is very simple to get your Digital Photo Frame out of the box and running in just a few minutes. Just plug the power adapter into the Digital Photo Frame and into a standard Wall Socket. Insert a memory card into the appropriate card slot on the side of the Digital Photo Frame, and turn it on. Your first slide show will automatically start to play.
Technical Specifications Model: DPF-BWP10 Product: 10” LCD Screen Digital Photo Frame Resolution: 1024X600 pixel Input Formats: Secure Digital™, Multi Media Card™, Compact Flash™, Memory Stick™, Memory Stick PRO™, Memory Stick DUO™ and USB Flash Drives.
www.jcmatthew.com JCMatthew One (1) Year Return to Base Limited Warranty JCMatthew's warranty obligations are limited to the terms set forth below: JCMatthew warrants this hardware product against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.