Table of Contents............................................................................................2 Important Safety Precautions...........................................................................3 Cleaning the LCD Screen...........................................................................3 Cleaning the Digital Picture Frame..............................................................3 Introduction......................................................................................
Identify the Parts
EXIT / Back SETUP / Menu Play / Enter / Mute Direction Slide Show Volume Zoom In Rotate DIGITAL PICTURE FRAME Replacing remote control battery If the remote control stops working, replace the battery (CR2025 lithium battery ) with a new one. 1. Pull out the battery holder. 2. Remove the old battery from the holder and then put a new battery. * "+"should be facing up. 3. Insert the battery holder back to the remote comtrol. WARNING Battery may explode if mistreated.
• Dispose the used batteries as specified by the local authorities. • Do not lesve the remote control in a very hot and humid place. • Incorrect use of the battery may cause leaking and corrosion. - When the remote control will not be used for a long perild of time, remove the battery from the remote control to prevent leaking and corrosion. - Incorrectly inserting, shorting, dismantling, or heating the battery, or throwing it into a fire may cause the battery to rupture and lesk.
You can also plug a USB Flash Drive into the USB port on your Digital Picture Frame, then follow the same steps in Card Selection Screen, Your Digital Picture Frame will see a USB Flash Drive the same way it sees memory cards.
Mode Selection Screen The Mode Selection Screen shows after you choose the memory source. Use it to choose the type of files you wish to display. File Show the file list 1. Press the Left and Right arrows on the remote control or the Digital Picture Frame to select the mode. 2. Press Enter to make the selection. If you selected Photo, the thumbnail screen opens. It is described below. If you selected any of the other file types, a screen listing all of the files with the chosen type.
4. To return to the Thumbnail screen, press the Exit button. Copy/Delete Files Copy Files from Flash Card into Built-in Memory (1) When Displaying Photos from the Memory Card a. Press the Setup button. A setup menu opens. b. Press the Up/Down arrows to select Copy Photo. c. Press Enter. A confirmation message is displayed and the photo is copied to the built-in memory. d. Press Exit to close the menu. (2) In the Thumbnail Screen a. Select pictures to be copied by Up/Down/Left/Right buttons.
b. Mark the pictures by Vol+ button, and you will see "V"on the photo; Unmark the pictures by Vol- button. c. Press Setup button firstly, then select Copy Picture, and then Copy Selected. Other way: Press Setup button firstly, then select Copy Picture, and then Copy All. In this way, all the pictures will be copied into the built-in memory. (3) In the Music, Video, and File Mode a. Select file by Up/Down button. b.
7. When the adjustments are made, press Exit to close the menu. Add Music to the Slide Show To play background music with a slideshow, copy audil files onto the same memory card as your photos. The music will play as the slide show runs. See "Copying Files from a Computer" for details on copying files. You can also choose a music file to play without a Slideshow. Just select it from the Music screen. Note: Music files must be standard Mp3 formats and not from licensed music download services. 1.
Display Option Language Magic Window Display Image Size Slide Show Transition Slide Show Speed Slide Show Music Slide Show Shuffle Settings English Description German French Spanish Portugal Supports 7 languages Italian Dutch On Off Display 4 pictures in Slide Show Original/Optimal Normal Random Fade Curtain Open_Door Cross_Comb Fast Medium Slow On / Off On / Off The Di gi tal Pi ctur e Fr ame can op timize you r ph ot os to di spl ay on the scree n Special effects shown to transition from one
Listening to Music If there are Music files on a memory card or in the built-in memory,you can play them on the Digital Picture Frame. 1. Use the Remote Control to open the Select Mode screen (described above) and select Music. A new screen opens listing all of the music files on the selected card. 2. Use the up and down arrows on the remote control to choose a file. 3. Press the Enter or play button to play the file. 4. Press Stop once to pause; to resume, press Play or Enter button. 5.
To watch a video, there must be video files in the memory card or the built - in memory. 1. In Select Mode, choose Video. 2. Use the Arrow keys to choose Video and press Enter. A screen listing all of the video files opens. 3. Use the Arrow buttons to choose the desired file and press Enter. The Digital Picture Frame plays the video. 4. Adjust the volume by using VOL+/VOL- buttons on the Remote Control.
why does it not turn on ? Please check if the adapter is properly plugged to the Picture Frame and the wall plug.
8.4 800X600 0.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.