NOLO VR AIO Device User Guide Scan the QR code to view the e-manual
Table of Contents Package Contents 1 Quick Start 3 Product Introduction 6 Product Care and Maintenance 15 Health and Safety Warnings 17 RoHS Declaration 19 Limited Consumer Warranty 20
Package Contents X Y B A All-in-One VR headset Controllers Power Adapter 5# Batteries Charging Cable Wrist Straps Lens Cleaning Cloth -1- O
Preparations before Use This product offers 6DoF head and hand tracking. You could freely move your headset and controller up, down, left, right, back, and forward in an immersive interactive world. To ensure safety in the game zone when playing, it is recommended that you: 1.
Quick Start 1.Pull out the battery insulator tab of the controller.
2. Hold the Power Button of Sonic for 2s to turn it on.
3. Put on the Sonic and adjust the tightness of the straps on top and at both sides until it is comfortable to wear and the picture is clear. 4. Pick up the controllers and follow to the system instruction.
Product Introduction All-in-One VR headset Return Button Confirm Button Type-C Port Heat dissipation hole Used for cooling, please do not block Head Straps Replaceable with hard head strap with battery used for data transmission and charging Home Button Click: Call out System Menu Hold for 2s: Recenter the screen direction Sensor Camera Used for positioning, please do not block Used for positioning, please do not block Power Button Click: Sleep Hold for 2s: Power on/off Hold for 5s: Forced shutdo
Facial Interface Volume+ VolumeMicrophone Heat dissipation hole TF Card Slot 3.
Head Control Mode: When the controllers are not connected, you can control the pointer by turning your head, and click the buttons on the headset to select, go back and etc. The operation interface by using head control mode is shown below: ※In head control mode, please avoid blocking the camera when clicking the buttons on the headset to avoid affecting the positioning. Reset view: Head control mode: hold the Home Button for 2s to reset the view.
Controller mode: when connecting the controllers (Solid green light on), turn your head to adjust the view and hold the Home Button on the controllers to set theview. Sleep/Wake up: Option 1: The headset will wake up automatically when putting on the headset; the headset will automatically sleep after taking off the headset for a period of time. Option 2: Press the Power Button to put the headset to sleep or wake it up. Auto-Sleep time can be set in“Settings > Device > Auto-Sleep Time”.
Wearing Glasses This product does not have the function of myopia adjustment. Support the use of most standard glasses with a frame width less than.
Interactive Controllers Menu Button X Y Thumbstick B move or control the direction X/Y Button A O A/B Button Left Controller Right Controller -11 - Home Button
Trigger Button confirm/fire Battery Cover Open to replace Grip Button 1.
Move the Pointer By holding the controllers, you can move the controllers/All-in-One VR headset to make the ray pointer to the content to be browsed and press the Trigger Button on the controller or Confirm Button on the All-in-One VR headset to select. Switch the Main Controller hand of the ray pointer The controller with the ray pointer is the main controller, which can do selection.
! Note:Abnormal circumstances include: improper controller connection, controller lagging while smooth pictures in a game, controller drifting or other serious positioning abnormalities, and abnormal controller pairing. Battery Replacement If the indicator on the controller is blinking red slowly, it means low power of the controller and the batteries need to be replaced. Open the battery compartment according to the direction shown in the battery cover and replace the batteries of 1.5V AA.
All-in-One VR Headset Maintenance Follow the tips below to properly maintain your All-in-One VR heaset. 1. Keep it away from sharp objects (such as the metal end of cables, etc. to prevent the lens of the device from being scratched). 2. When it is not used, please place it properly and keep the lens away from direct sunlight; otherwise, it may cause irreversible damage to the screen display. 3.
How to Clean the Mask It may be necessary to clean the mask after using the All-in-One VR headset several times. 1. Dip the soft cloth in the accessory box in a little cold water or dilute alcohol. 2. Gently wipe the dirty area of the mask with the soft cloth. 3. Put the mask in a cool place for drying. ! Note:1. Do not dry the mask with a hair dryer. 2. Avoid sun exposure. How to Clean the Device Lens 1. Wipe the lens with the soft cloth in the accessory box. 2.
Safety Information Before using this device, please read and follow all safety information to ensure the best performance and avoid dangerous or illegal situations. 1. Please ensure only use in a safe environment. This product produces an immersive experience that can distract you and can completely block your perception of your actual surroundings. Please move within the safe zone and avoid use in, near, or under dangerous areas, such as stairs, windows, and heat sources. 2.
6. Please disconnect the device with the charger and unplug the charger from the power socket when the charging is completed or not needed. 7. Please dispose this device, battery and its accessories according to local regulations, and do not dispose of them as household garbage. Improper disposal of the battery may cause the battery to explode. 8. The use of unapproved or incompatible power supplies, chargers or batteries may cause fire, explosion or other hazards. 9.
RoHS Declaration Hazardous/toxic substances and elements Shell Circuit Board Charger Accessories Package This form is compiled according to IEC 62321. Οrefers to the amount of the hazardous and toxic substances in all the materials of the part is below the allowed limits of IEC 62321. refers to the amount of the hazardous and toxic substances in all the materials of the part exceeds the allowed limit of IEC 62321.
After-sales Service Policies Starting from the date of sales (subject to 00:00 of the second day from the actual signed receipt date), the following warranty services of replacement, repair and maintenance will be provided: Return within 7 days without reasons (including the day the product is sold): All purchased NOLO products of the company can be returned without reasons within 7 days under the situation of no damages, complete accessories, sound package and no impact for the second sales.
replacement within 15 days. After the application is approved, please send the defective product to the specified address and the new product will be sent after the defective one is received; If no problem is found on the defective product after testing, it cannot be replaced.
Warranty Not Cover ·The product failures or damages caused by incorrect or improper operations and use; ·The product damages caused by using non-original or authorized third-party accessories is not used, maintain, cared for in according to the instructions or transportation and other accidents; ·Self-disassembly, maintenance, or modification of the unofficially authorized personnel; ·Product damages, such as dropping, crash, scratch, water ingress, improper voltage input, mechanical damage, high temperatur
Supplementary Regulations: ·TThe accessories purchased separately are covered by warranty services according to the corresponding policies; ·Customized products are not supported for return and exchange of goods without reasons within 7 days according to the relevant national laws and regulations; ·The company reserves the right of final interpretation of the above after-sales warranty policies to the extent permitted by law.
‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. NOLO official community: http://forums.nolovr.