User Manual

The CK-100 kit allows you to replace the swing arm and
platform of the Wimberley Head Version II (WH-200) with a
side-mounted Wimberley quick-release clamp. It converts
your full gimbal WH-200 to a Sidemount Wimberley Head,
which is advantageous when weight and bulk need to be
reduced.
The Head can easily be converted back to the full gimbal
when desired by reversing the steps.
The procedure is simple and the only tool required is a 5/32
hex key (enclosed).
Please make sure that you remove the appropriate parts
from your existing Head and install the new parts properly.
Instructions
Wimberley, Inc. Phone: [phone]
1750 Broadway St Toll Free: 1-888-665-2746 (USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com [e-mail]
Removing the Arm and Platform
Remove the two screws that attach the swing arm to the
Wimberley Head (see picture below). Once these are re-
moved, the arm comes off easily.
About This Product
Package Contents:
•Quick-release Clamp: for Wimberley Sidemount (Qty 1)
•Screws: 10-24 X 1/2” Socket Cap screws with patch (Qty 2)
•Instruction Sheet: Sidemount Wimberley Head (Qty 1)
•Hex Key: 5/32 (Qty 1)
Weight: 0.31 lbs
Dimensions (L x W x H): 3.4” x 2.5” x .81”
The two extra screws that
come with this kit are identi-
cal to those removed and
are provided in case of loss.
Wimberley, Inc. Phone: [phone]
1750 Broadway St Toll Free: 1-888-665-2746 (USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com [e-mail]
Thank you for your interest in Wimberley products. If you have any questions or comments please feel free to contact us.
Made in USA
Attaching the CK-100
Using the included hex key, attach the CK-100 quick-release clamp to the upright of your
Wimberley Head Version II using the screws that you just removed (see image below).
You are now ready to use the Sidemount Head:
there are important balancing differences between the two types of Heads. It is important to read the included product
instructions for the Wimberley Sidemount prior to use.
Tip: Keep your swing arm, platform and
this kit in a safe place so that you will
have it when you wish to convert the
Head back to a full gimbal.
CK-100
Sidemount
Conversion Kit
10 Year Warranty – See www.tripodhead.com/warranty.cfm for complete details
Wimberley, Inc. ©2020, All Rights Reserved Rev. 200420