Specifications

ManualsBrandsWilson Electronics ManualsTV signal amplifiersX-1

Contents

Before Getting Started ............................1

Accessories and Antenna Options . . . . . . . . . . . . . . . . . . 1

Quick Installation Overview ........................2

Installation Diagram ..............................2

Installing the External Adapter ......................3

Installing the Outside Antenna ......................3

Installing a Wilson Electronics Signal Booster. . . . . . . . . . 3

Powering Up a Wilson Electronics Signal Booster . . . . . . 3

Installing the Mounting Plate (sold separately) . . . . . . . . . 4

Warnings and Recommendations ...................5

Guarantee and Warranty ..........................6

Signal Booster Specifications . . . . . . . . . . . . . .Back Cover

DataPro

™

Direct Connect

800/1900 MHz

Smart Technology™

Signal Booster

Note: This manual contains important safety and operating information.

Please read and follow the instructions in this manual. Failure to do so could

be hazardous and result in damage to your Signal Booster.

Appearance of device and accessories may vary.

Summary of content (5 pages)

PAGE 1
DataPro™ Direct Connect 800/1900 MHz Smart Technology™ Signal Booster Contents Before Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Accessories and Antenna Options . . . . . . . . . . . . . . . . . . 1 Quick Installation Overview. . . . . . . . . . . . . . . . . . . . . . . . 2 Installation Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
Installation Instructions for the Following Wilson Electronics Signal Booster: DataPro: FCC ID: PWO2B1225 IC: 4726A-2B1225 Model: 2B1225 The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Before Getting Started This guide will help you properly install your Wilson Electronics Signal Booster. It is important to read through all of the installation steps for your particular application prior to installing any equipment.
PAGE 3
How it Works Wilson Electronics Signal Boosters are bi-directional devices that deliver service levels consistent with what would be expected in areas of high cell network coverage. They amplify a weak or shadowed signal in mobile, marine, M2M and in-building applications. When using a Wilson Electronics Signal Booster in conjunction with Wilson Electronics antennas, the Outside Antenna will collect the cell tower signal and send it through the cable to the Signal Booster.
PAGE 4
Warnings and Recommendations Warning: Verify that both the Outside Antenna and the adapter extension cable are connected to the Signal Booster before powering up the Signal Booster. Warning: Use only the power supply provided in this package. Use of a non-WIlson Electronics products may damage your equipment. Warning: RF Safety: All omni-directional antennas shown on page 1 must be installed so that the distance from the antenna to any person is no less than 8 inches.
PAGE 5
Signal Booster Specifications Dual-Band 800/1900 MHz Specifications 2B1225 SMA Female 50 ohms Model Number / Part Number Connectors Impedance (input/output) Dimensions with mounting plate without mounting plate Frequency 1 Passband Gain (nominal) 3.9 x 3.1 x 0.95 in 3.9 x 1.9 x .