Installation guide

ManualsBrandsWilson Electronics ManualsTV signal amplifiers812201

Signal Booster

Installation

Guide

Direct Connect

Signal Booster

Contents:

Before Getting Started / How it Works ................ 2

In-Vehicle Installation

Outside Antenna - In-Vehicle . . . . . . . . . . . . . . . . . . . . 3

Wilson Electronics Signal Booster

.................. 4

External Adapter .............................. 4

In-Building Installation

Outside Antenna .............................. 5

Wilson Electronics Signal Booster . . . . . . . . . . . . . . . . 5

External Adapter .............................. 6

Powering Up a Wilson Electronics Signal Booster . . . . . . 7

Warnings and Recommendations ................... 8

About Wilson Electronics .......................... 9

Guarantee and Warranty ......................... 10

Signal Booster Specifications . . . . . . . . . . . . . .Back Cover

Wilson

Electronics, Inc.

Note: This manual contains important safety and operating information.

Please read and follow the instructions in this manual. Failure to do so could

be hazardous and result in damage to your Signal Booster.

Summary of content (12 pages)

PAGE 1
Signal Booster Installation Guide Direct Connect Signal Booster Contents: Before Getting Started / How it Works. . . . . . . . . . . . . . . . 2 In-Vehicle Installation Outside Antenna - In-Vehicle . . . . . . . . . . . . . . . . . . . . 3 Wilson Electronics Signal Booster . . . . . . . . . . . . . . . . . . 4 External Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 In-Building Installation Outside Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
Installation Instructions for the Following Wilson Electronics Signal Boosters Direct Connect Single Band Signal Booster – Model # 811101 Contains 1900 MHz bypass to allow for antenna gain and 1575 MHz bypass to allow for GPS reception. FCC ID: PWO824D IC: 4726A-824D Direct Connect Dual-Band Signal Booster – Model # 811201, Product # 810204, 811204, 810205 Safe for use on all 800 / 1900 carriers.
PAGE 3
Before Getting Started This guide will help you properly install Wilson Electronics Direct Connect Signal Boosters in both in-vehicle and in-building applications. It is important to read through all of the installation steps for your particular application prior to installing any equipment. Read through the instructions, visualize where all the equipment will need to be installed and do a soft installation before mounting any equipment.
PAGE 4
In-Vehicle Installing an Outside Antenna The outside antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical. Optional MagnetMount Antenna Shown Part #301103 Carefully Pull Down Door Seal Run Cable Under Seal The antenna cable may be ran through the door to the Signal Booster. For a more professional-looking installation, run the antenna cable under the door seal. Carefully pull down the door seal.
PAGE 5
In-Vehicle Installing a Wilson Electronics Signal Booster Select a location to install the Signal Booster that is away from excessive heat, direct sunlight, moisture and that has proper ventilation. Recommended installation locations for in-vehicle are: • Under the seat • Under the dash Run the cable from the outside antenna and attach it to the connector labeled “Outside Antenna” on the Signal Booster.
PAGE 6
In-Building Installing a Wilson Electronics Outside Antenna – In-Building Select a location on the roof of the building to install the outside antenna that has the most unobstructed line of sight to the cell tower. Follow the specific antenna installation instructions included with the outside antenna. Lightning protection is recommended for all in-building installations (sold separately). Take extreme care to ensure neither you nor the antenna come in contact with any electrical power lines.
PAGE 7
In-Building Installing a Wilson Electronics External Adapter An 18-inch external adapter is required to connect the cell phone or cellular data card to the Signal Booster. The external adapter is cell phone/data card-specific and may be purchased through a local retailer. Sample adapter Refer to Wilson Electronics Adapter Guide to identify the right adapter for your cell phone or cellular data card. The adapter guide is available through a local retailer or visit www.WilsonElectronics.com.
PAGE 8
Powering up a Wilson Electronics Signal Booster In-Building/In-Vehicle ! Carefully insert the power cable. Warning: Verify that both the outside antenna and the adapter extension cable are connected to the Signal Booster before powering up the Signal Booster. For In-Vehicle, first connect the power cable to the Signal Booster input marked “DC 12 V IN” and then insert the large end into a 12 V DC power socket or vehicle power adapter.
PAGE 9
Warnings and Recommendations Warning: Verify that both the outside antenna and the adapter extension cable are connected to the Signal Booster before powering up the Signal Booster. Warning: RF Safety: In-vehicle - The outside antenna must be installed with a separation of at least 16 inches from any of the vehicle’s occupants or nearby persons and must not be located or operating in conjunction with any other antenna or Signal Booster. Use of a cellular Signal Booster with an antenna gain higher than 5.
PAGE 10
About Wilson Electronics Wilson Electronics, Inc. has been a leader in the wireless communications industry for nearly 40 years. The company designs and manufactures Signal Boosters, antennas and related components that significantly improve cellular telephone signal reception and transmission in a wide variety of applications, both mobile and in-building.
PAGE 11
30-Day Money-Back Guarantee All Wilson Electronics products are protected by Wilson Electronics 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 1-Year Warranty Wilson Electronics Signal Boosters are warranted for one (1) year against defects in workmanship and/or materials.
PAGE 12
Wilson Electronics, Inc. ® 3301 East Deseret Drive, St. George UT 84790 For additional Technical Support visit www.WilsonElectronics.com or email at: tech@wilsonelectronics.com Phone: 866-294-1660 Local: 435-673-5021 Fax: 435-656-2432 www.twitter.com/WilsonCellular www.facebook.com/WilsonCellular Part #110432 AIG ENGLISH 027 / 07.15.11 824-894 MHz Frequency 812201 811901 890-960 MHz 1885-2200 MHz 5.5 x 4.3 x 1.4 (inch) / 14 x 10.8 x 3.5 (cm) 1.32 lbs / 0.6 kg Dimensions Weight 814021 13.