User's Manual

ManualsBrandsWilson Electronics ManualsElectronicsTRI-BAND SIGNAL BOOSTER

Contents:

Accessories ..................................................................... 1

How it Works .................................................................... 2

Vehicle Installation Diagram ........................................................ 2

Install the Outside Antenna ......................................................... 2

Power up the Wilson Electronics Sleek ............................................... 3

Adjusting the Sleek

Arms .......................................................... 4

Understanding the Sleek

Lights ..................................................... 4

Troubleshooting .................................................................. 4

In-Building Installation ............................................................. 5

Warnings ........................................................................ 6

About Wilson Electronics ........................................................... 6

Signal Booster Specications ...............................................Back Cover

To boost your phone’s signal power, the phone must be placed in the Sleek cradle. For best results, use a

Bluetooth

headset or hands free device, while the phone remains in the Sleek.

Cellular Signal Booster with Built-in Antenna

operates on 700 MHz Band 13 / 800 MHz / 1900 MHz

(Band 13 is Verizon Wireless™ LTE)

Appearance of device and accessories may vary.

Note: This manual contains important safety and operating information. Please read and follow the

instructions in this manual. Failure to do so could be hazardous and result in damage to your Sleek.

(Band 13 is

Summary of content (8 pages)

PAGE 1
® Cellular Signal Booster with Built-in Antenna operates on 700 MHz Band 13 / 800 MHz / 1900 MHz (Band 13 is Verizon Wireless™ LTE) (Band 13 is * Contents: Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 How it Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
Sleek® 4G-V operates on 700 MHz Band 13 / 800 MHz / 1900 MHz (Band 13 is Verizon Wireless™ LTE)* Model #2B5125 FCC: PWO2B5125 IC: 4726A-2B5125 FCC requires to never use the cell phone in the cradle next to your ear. The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
PAGE 3
General Your Wilson Electronics Sleek has been carefully engineered to significantly improve the performance of your phone. Together with an Outside Antenna, the Sleek’s state-of-the-art circuitry is designed to increase your phone’s signal to and from the cell tower. The Sleek reduces disconnects and dropouts and increases data communication rates on 2G, 3G networks and 4G networks (in some models).
PAGE 4
2. Attach the Mounting Bracket A mounting bracket is provided for attaching the Sleek to your vehicle’s dash. Other options are also available from Wilson Electronics. Adhesive Bracket- Included in this package 1. Clean the area where the bracket is to be mounted with the supplied alcohol wipe. Allow to dry. 2. Peel the backing to expose the adhesive and press the bracket onto the desired location in the vehicle. Note: Be sure the tab is positioned vertically, not horizontally. 3.
PAGE 5
Adjusting the Sleek® Arms Included with your Sleek are various sized arms, which will provide you with multiple options to customize the Sleek to fit your phone. 1. Change arms 2. Reposition arms Gently grab the arm and lift upward until the arm slides free from the Sleek. Position the arm above a different slot on the Sleek (indicated by the yellow in the drawing). Gently slide the arm down until the arm is firmly in place. NOTE: The cell phone must be placed in the Sleek to work properly.
PAGE 6
In-Building Installation Installing a Wilson Electronics Outside Antenna in a Building Follow the specific antenna instructions included with the Outside Antenna (sold separately except for certain kits). These instructions assume that you are using a Wilson Electronics Mini-Magnet Mount Antenna and the optional suction cup window bracket. To receive the best signal, select a window on the side of your building where your outside signal is the strongest.
PAGE 7
Warnings Warning: Do not plug in the power supply until the Outside Antenna cable is attached to the Sleek. Warning: RF Safety: The Sleek cradle/Signal Booster must be installed with a separation of at least 8 inches from all persons and must not be located in conjunction with any other antenna or Signal Booster. Warning RF Safety: The FCC requires that a cell phone with cradle attached may only be used with the cradle mounted as illustrated in this installation guide.
PAGE 8
Signal Booster Specifications Sleek 4G-V 2B5125 SMA 50 ohms Model Number Connectors Impedance (input/output) Frequency 746-787 MHz / 824-894 MHz / 1850-1990 MHz 1 Passband Gain (nominal) 2 20 dB Bandwidth (nominal) 19 dB (typical) / 23 dB (maximum) Uplink Downlink Typical / Maximum Typical / Maximum N/A N/A 25 MHz / 28 MHz 28 MHz / 31 MHz 61 MHz / 67 MHZ 61 MHz / 67 MHz 700 MHz 800 MHz 1900 MHz Power output for single cell phone (uplink) dBm 700 MHz 800 MHz 1900 MHz CDMA N/A 29.3 27.