User's Manual

ManualsBrandsWilson Electronics ManualsElectronicsQuint-Band Switchable Signal Booster

Contents:

Accessories ...............................................................1

How it Works ..............................................................2

Vehicle Installation Diagram ..................................................2

Install the Outside Antenna ...................................................2

Power up the Wilson Electronics Sleek .........................................3

Adjusting the Sleek

Arms ....................................................4

Understanding the Sleek Lights ...............................................4

Troubleshooting ............................................................5

In-Building Installation .......................................................5

Warnings ..................................................................6

About Wilson Electronics .....................................................6

Signal Booster Specications ........................................Back Cover

To boost your phone’s signal power, the phone must be placed in the Sleek 4G cradle. For best

results, use a Bluetooth

headset or hands free device, while the phone remains in the Sleek 4G.

Cell Phone Signal Booster with Built-in Antenna

Appearance of device and accessories may vary.

Note: This manual contains important safety and operating information. Please read and follow the

instructions in this manual. Failure to do so could be hazardous and result in damage to your Sleek.

U.S. Patent Nos. – D626,953; 7,684,838; 7,221,967; 7,729,669;

7,486,929; 7,729,656; 7,409,186; 7,783,318

Summary of content (8 pages)

PAGE 1
® Cell Phone Signal Booster with Built-in Antenna U.S. Patent Nos. – D626,953; 7,684,838; 7,221,967; 7,729,669; 7,486,929; 7,729,656; 7,409,186; 7,783,318 Contents: Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 How it Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
Sleek ® 4G operates on (Band 12/17, 13) 700 / 800 / AWS 1700 - 2100 / (Band 25) 1900 MHz Model #2B3425 FCC: PWO2B3425 FCC requires to never use the cell phone in the cradle next to your ear. Inside this Package Sleek® 4G Cell Phone Signal Booster Mini-Magnet Mount Antenna (859999) (included in some kits) 5.
PAGE 3
How it Works With the phone in the cradle and while using a wireless Bluetooth® headset (or hands free device) the Outside Antenna collects the cell tower signal and sends it through the cable to the Sleek 4G. The signal is then boosted by the Sleek 4G and sent to the phone. When the phone transmits, the signal is picked up wirelessly and boosted by the Sleek 4G and transmitted back to the cell tower through the Outside Antenna. NOTE: The cell phone must be placed in the cradle to work properly.
PAGE 4
2. Attach the Mounting Bracket (included in this package) a. Clean the area where the bracket is to be mounted with the supplied alcohol wipe. Allow to dry. b. Peel the backing to expose the adhesive and press the bracket onto the desired location in the vehicle. Note: Be sure the tab is positioned vertically, not horizontally. c. Allow the adhesive to cure for 24 hours before you attach the Sleek 4G. 3.
PAGE 5
Adjusting the Sleek® 4G Arms Sleek 4G Front View Included with your Sleek 4G are various sized arms, which will provide you with multiple options to customize the Sleek to fit your phone. Sleek Arm Sleek Arm Note: Figures 3 & 4 indicate slots used for adjustable arms. Figure 3 Sleek 4G Top View multiple arm slots for custom fit Figure 4 Sleek Arm Sleek Arm Understanding the Sleek® 4G Lights Separation of Sleek 4G and the Outside Antenna is very important.
PAGE 6
Troubleshooting SYMPTOM: No increase in bars 1. Make sure that the antenna connector is tight. 2. The cell phone must be placed in the Sleek 4G cradle to amplify properly. 3. Call Wilson Electronics Technical Support at 866-294-1660. In-Building Installation Installing a Wilson Electronics Outside Antenna in a Building Follow the specific antenna instructions included with the Outside Antenna (sold separately except for certain kits).
PAGE 7
Warnings Warning: Do not plug in the power supply until the Outside Antenna cable is attached to the Sleek. Warning: RF Safety: The Sleek cradle/Signal Booster must not be used in conjunction with any other antenna or Signal Booster. Warning RF Safety: The FCC requires that a cell phone with cradle attached may only be used with the cradle mounted as illustrated in this installation guide. A cell phone held near the ear must be without the cradle attached.
PAGE 8
30-Day Money-Back Guarantee All Wilson Electronics products are protected by Wilson Electronics 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 1-Year Warranty Wilson Electronics Signal Boosters are warranted for one (1) year against defects in workmanship and/or materials.