User's Manual

ManualsBrandsWilson Electronics ManualsElectronicsTRI-BAND SIGNAL BOOSTER

To boost your phone’s signal power, the phone must be placed in the Sleek cradle. For

best results, while the phone remains in the Sleek, use a Bluetooth headset, or hands

free device.

Appearance of device and accessories may vary.

Smart Technology

™

800 / (1700-2100) / 1900 MHz

Cradle Cell Phone Signal Booster

4G-C

Note: This manual contains important safety and operating information. Please read and follow the

instructions in this manual. Failure to do so could be hazardous and result in damage to your Sleek.

Contents:

Accessories ............................................................1

How it Works ...........................................................2

Install Diagrams - Vehicle .................................................2

Vehicle Installation .......................................................2

Power up the Wilson Electronics Sleek ......................................3

Adjusting the Sleek

Arms .................................................4

Understanding the Sleek Lights ............................................4

Troubleshooting .........................................................4

In-Building Installation ....................................................5

Warnings ...............................................................6

About Wilson Electronics ..................................................6

Signal Booster Specications .....................................Back Cover

U.S. Patent No. 7,684,838; D626,953; 7,221,967; 7,729,669; 7,486,929; 7,729,656; 7,409,186; 7,783,318

Summary of content (8 pages)

PAGE 1
® 4G-C Smart Technology ™ 800 / (1700-2100) / 1900 MHz Cradle Cell Phone Signal Booster U.S. Patent No. 7,684,838; D626,953; 7,221,967; 7,729,669; 7,486,929; 7,729,656; 7,409,186; 7,783,318 Contents: Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 How it Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Install Diagrams - Vehicle . . . . . . . .
PAGE 2
Sleek® 4G-C Smart Technology ™ 800 / (1700-2100) / 1900 MHz Cradle Cell Phone Signal Booster Model # 2B2725 FCC ID: PWO2B2725 IC: 4726A-2B2725 FCC requires to never use the cell phone in the cradle next to your ear. The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
PAGE 3
General Your Wilson Electronics Sleek has been carefully engineered to significantly improve the performance of your phone. Together with an Outside Antenna, the Sleek’s state-of-the-art circuitry is designed to increase your phone’s signal to and from the cell tower. The Sleek reduces disconnects and dropouts and increases data communication rates on 2G, 3G networks and 4G on some models.
PAGE 4
RF Safety Warning: The “Outside Antenna” must be either a Wilson Electronics Magnet Mount or Mini-Magnet Mount Antenna and requires at least an 8 inch (20 cm) separation distance from all persons. Other Outside Antennas may be used with fixed building installations provided that (a) they are located with at least a 8 inch (20 cm) separation distance from all persons, (b) their gain less cable loss does not exceed 3.
PAGE 5
Adjusting the Sleek Arms Included with your Sleek are various sized arms, which will provide you with multiple options to customize the Sleek to fit your phone. 1. Change arms Gently grab the arm and lift upward until the arm breaks free from the Sleek. 2. Reposition arms Position the arm above a different slot on the Sleek (indicated by the yellow in the drawing). Gently slide the arm down until the arm is firmly in place. NOTE: The cell phone must be placed in the Sleek to work properly.
PAGE 6
In-Building Installation Installing a Wilson Electronics Outside Antenna in a Building Follow the specific antenna instructions included with the Outside Antenna (sold separately except for certain kits). These instructions assume that you are using a Wilson Electronics Mini-Magnet Mount Antenna and the optional suction-cup window bracket. To receive the best signal, select a window on the side of your building where your outside signal is the strongest.
PAGE 7
Warnings: Warning: Do not plug in the power supply until the Outside Antenna cable is attached to the Sleek. Warning: RF Safety: The Sleek cradle/Signal Booster must be installed with a separation of at least 8 inches from all persons and must not be located in conjunction with any other antenna or Signal Booster. Warning: RF Safety: The FCC requires that a cell phone with cradle attached may only be used with the cradle mounted as illustrated in this installation guide.
PAGE 8
Signal Booster Specifications Sleek 4G-C 2B2725 SMA Female 50 ohms Model Number Connectors Impedance (input/output) Frequency 1 1710-1755 MHz & 2110-2155 MHz / 824-894 MHz / 1850-1990 MHz Passband Gain (nominal) Uplink Downlink 2 20 dB Bandwidth (nominal) Power output for single cell phone (uplink) dBm 1700 / 2100 MHz Typical / Maximum 19 dB / 21 dB 21 dB / 23 dB 1700 / 2100 MHz 46 MHz / 50 MHz 800 MHz Typical / Maximum 21 dB / 23 dB 19 dB / 22 dB 800 MHz 26 MHz / 28 MHz 1900 MHz Typical / Maximum